服务器一般故障排除(国外英文资料)
服务器一般故障排除(国外英文资料)
This article focuses on three parts: the first part focuses on the basic principles of server troubleshooting; The second part describes some instances of server hardware failure exclusion; The third section describes some instances of server software troubleshooting.
The basic principle of the first part of the server troubleshooting
1, what should the server do without a display
Check the power supply environment, zero - fire; Zero - voltage to
Check the power indicator, if it is bright, is it normal
Is the light on the keyboard on the keyboard when pressed? Does the fan all turn
Change the monitor and replace the other monitor
Remove the added memory
Remove the added CPU
Remove increased third-party I/O CARDS
Check for memory and CPU inserts
9, the Clear CMOS
Replace major spare parts such as system board, memory and CPU
What are the basic principles of server failure
Try to restore the system default configuration
A: hardware configuration: removing spare parts and non-standard parts for third-party vendors
B: resource allocation: clear the CMOS and restore the resource initial configuration
C: BIOS, F/W, driver: update the latest BIOS, F/W, and related drivers
D: TPL: are the third-party I/O CARDS extended to be the hardware compatibility list (TPL) of the machine
From basic to complex
A: on the system from the individual to the network: first, there will be failed server run independently, to be run after testing normal access networks, observe fault phenomenon and process change
B: hardware from the minimum system to the reality system: refers to the hardware that starts from the available hardware to the actual system
C: software from the basic system to the reality system: refers to the beginning of the basic operating system to the actual system
Exchange contrast
A: in the most likely condition, the exchange operation is simple and effective
B: swap the NOS carrier for the software environment
C: exchange hardware, both for the hardware e