matlab允许缺模型,Matlab与CCS模型化仿真问题，缺少stddef.h文件

The call to idelink_ert_make_rtw_hook, during the exit hook generated the following error:

Error while building the project.

The build process will terminate as a result.

Caused by:

Error while building the project.

The build failed with the following message: "C:/ti/ccsv6/tools/compiler/ti-cgt-c2000_15.12.1.LTS/bin/cl2000.exe" -I"D:/MATLAB/SupportPackages/R2015b/texasinstrumentsc2000/toolbox/target/supportpackages/tic2000/inc" -I"D:/matlabwork/GPIO_ticcs" -I"D:/matlabwork" -I"D:/Program Files/MATLAB/R2015b/extern/include" -I"D:/Program Files/MATLAB/R2015b/simulink/include" -I"D:/Program Files/MATLAB/R2015b/rtw/c/src" -I"D:/Program Files/MATLAB/R2015b/rtw/c/src/ext_mode/common" -I"D:/Program Files/MATLAB/R2015b/rtw/c/ert" -D"__TICCSC__" -D"RT" -D"USE_RTMODEL" -ml -v28 --float_support=fpu32 -D"MODEL=GPIO" -D"NUMST=1" -D"NCSTATES=0" -D"HAVESTDIO=" -D"ONESTEPFCN=1" -D"TERMFCN=1" -D"MAT_FILE=0" -D"MULTI_INSTANCE_CODE=0" -D"INTEGER_CODE=0" -D"MT=0" -D"CLASSIC_INTERFACE=0" -D"ALLOCATIONFCN=0" -D"TID01EQ=0" -I"D:/matlabwork/include" -fr"./derived/" ./DSP2833x_ADC_cal.asm ./DSP2833x_CodeStartBranch.asm ./DSP2833x_CpuTimers.c ./DSP2833x_DMA.c ./DSP2833x_DefaultIsr.c ./DSP2833x_GlobalVariableDefs.c ./DSP2833x_PieCtrl.c ./DSP2833x_PieVect.c ./DSP2833x_SysCtrl.c ./DSP2833x_usDelay.asm ./GPIO.c ./GPIO_data.c ./GPIO_main.c ./MW_c28xx_board.c ./MW_c28xx_csl.c

[DSP2833x_ADC_cal.asm]

[DSP2833x_CodeStartBranch.asm]

[DSP2833x_CpuTimers.c]

[DSP2833x_DMA.c]

[DSP2833x_DefaultIsr.c]

[DSP2833x_GlobalVariableDefs.c]

[DSP2833x_PieCtrl.c]

[DSP2833x_PieVect.c]

[DSP2833x_SysCtrl.c]

[DSP2833x_usDelay.asm]

[GPIO.c]

".\GPIO.h", line 18: fatal error: cannot open source file "stddef.h"

1 catastrophic error detected in the compilation of "./GPIO.c".

Compilation terminated.

>> Compilation failure

gmake: *** [derived/DSP2833x_ADC_cal.obj] Error 1

stddef.h这个文件在哪？怎么解决这个问题