[Iphone]iOS
UITableView之自定义UITableViewCell:Cell高度、分割线、间距等
子标题: 自定义UITableViewCell
UITableView的强大更多程度上来自于可以任意自定义UITableViewCell单元格。
通常,UITableView中的Cell是
动态的,在使用过程中,会创建一个Cell池,根据每个cell的高度(即tableView:heightForRowAtIndexPath:返回
值),以及屏幕高度计算屏幕中可显示几个cell。而进行自定义TableViewCell无非是采用代码实现或采用IB编辑nib文件来实现两种方式,
本文主要收集代码的方式实现各种cell自定义。
如何动态调整Cell高度
- (UITableViewCell *)tableView:(UITableView *)tableView
cellForRowAtIndexPath:(NSIndexPath *)indexPath {
static
NSString *CellIdentifier = @"Cell";
UITableViewCell
*cell
= [tableView
dequeueReusableCellWithIdentifier:CellIdentifier];
if (cell == nil) {
cell = [[[UITableViewCell
alloc]
initWithFrame:CGRectZero reuseIdentifier:CellIdentifier] autorelease];
UILabel *label = [[UILabel alloc] initWithFrame:CGRectZero];
label.tag
= 1;
label.lineBreakMode = UILineBreakModeWordWrap;
label.highlightedTextColor =
[UIColor
whiteColor];
label.numberOfLines = 0;
label.opaque = NO; //
选中Opaque表示视图后面的任何内容都不应该绘制
label.backgroundColor =
[UIColor
clearColor];
[cell.contentView
addSubview:label];
[label
release];
}
UILabel
*label
= (UILabel *)[cell viewWithTag:1];
NSString
*text;
text =
[textArray
objectAtIndex:indexPath.row];
CGRect
cellFrame =
[cell
frame];
cellFrame.origin = CGPointMake(0,
0);
label.text = text;
CGRect
rect =
CGRectInset(cellFrame, 2,
2);
label.frame = rect;
[label sizeToFit];
if (label.frame.size.height > 46) {
cellFrame.size.height = 50 + label.frame.size.height - 46;
}
else
{
cellFrame.size.height = 50;
}
[cell setFrame:cellFrame];
return
cell;
}
- (CGFloat)tableView:(UITableView *)tableView
heightForRowAtIndexPath:(NSIndexPath *)indexPath
{
UITableViewCell
*cell
= [self tableView:tableView
cellForRowAtIndexPath:indexPath];
return
cell.frame.size.height;
}
如何用图片自定义Table
Separeator分割线
一般地,利用类似[tableView
setSeparatorColor:[UIColor
redColor]];语句即可修改cell中间分割线的颜色。那又如何用一个图片作为分割线背景呢?可以尝试如下:
方法一:
先设置cell separatorColor为clear,然后把图片做的分割线添加到自定义的custom cell上。
方法二:
在cell里添加一个像素的imageView后将图片载入进,之后设置tableView.separatorStyle =
UITableViewCellSeparatorStyleNone
自定义首行Cell与其上面导航栏间距
tableView.tableHeaderView = [[[UIView alloc] initWithFrame:CGRectMake(0,0,5,20)] autorelease];
自定义UITableViewCell的accessory样式 默认的accessoryType属性有四种取值:UITableViewCellAccessoryNone、
UITableViewCellAccessoryDisclosureIndicator、
UITableViewCellAccessoryDetailDisclosureButton、
UITableViewCellAccessoryCheckmark。
如果想使用自定义附件按钮的其他样式,则需使用UITableView的accessoryView属性来指定。
UIButton *button;
if(isEditableOrNot) {
UIImage
*image
= [UIImage imageNamed:@"delete.png"];
button =
[UIButton
buttonWithType:UIButtonTypeCustom];
CGRect
frame =
CGRectMake(0.0,0.0,image.size.width,image.size.height);
button.frame = frame;
[button setBackgroundImage:image forState:UIControlStateNormal];
button.backgroundColor = [UIColor clearColor];
cell.accessoryView = button;
}else{
button =
[UIButton
buttonWithType:UIButtonTypeCustom];
button.backgroundColor = [UIColor clearColor];
cell.accessoryView = button;
}
以上代码仅仅是定义了附件按钮两种状态下的样式,问题是现在这个自定义附件按钮的事件仍不可用。
即事件还无法传递到
UITableViewDelegate的accessoryButtonTappedForRowWithIndexPath方法上。
当我们在上述代码 中在加入以下语句:
[button addTarget:self
action:@selector(btnClicked:event:)
forControlEvents:UIControlEventTouchUpInside];
后,
虽然可以捕捉到每个附件按钮的点击事件,但我们还无法进行区别到底是哪一行的附件按钮发生了点击动作!因为addTarget:方法最多允许传递两个参
数:target和event,这两个参数都有各自的用途了(target指向事件委托对象,event指向所发生的事件)。看来只依靠Cocoa框架已
经无法做到了。
但我们还是可以利用event参数,在自定义的btnClicked方法中判断出事件发生在UITableView的哪一个cell上。因为UITableView有一个很关键的方法indexPathForRowAtPoint,可以根据触摸发生的位置,返回触摸发生在哪一个cell的indexPath。而且通过event对象,正好也可以获得每个触摸在视图中的位置。
// 检查用户点击按钮时的位置,并转发事件到对应的accessory
tapped事件
- (void)btnClicked:(id)sender event:(id)event
{
NSSet *touches = [event allTouches];
UITouch *touch = [touches
anyObject];
CGPoint currentTouchPosition
= [touch locationInView:self.tableView];
NSIndexPath *indexPath = [self.tableView
indexPathForRowAtPoint:currentTouchPosition];
if(indexPath != nil)
{
[self tableView:self.tableView
accessoryButtonTappedForRowWithIndexPath:indexPath];
}
}
这样,UITableView的accessoryButtonTappedForRowWithIndexPath方法会被触发,并且获得一个indexPath参数。通过这个indexPath参数,我们即可区分到底哪一行的附件按钮发生了触摸事件。
- (void)tableView:(UITableView *)tableView
accessoryButtonTappedForRowWithIndexPath:(NSIndexPath *)indexPath
{
int *idx = indexPath.row;
//这里加入自己的逻辑
}