这篇博客介绍了如何配置VLAN来实现网络隔离，通过示例配置了多个VLAN，并在不同端口分配了默认VLAN，以实现不同区域的网络划分。同时，提到了可能的网关设置位置，但未明确指出2300设备是否自带交换机功能。
网关配在那？在交换机还是防火墙？你配置VLAN的目的是为了隔离，2300没有下带交换机了吧？
#
interface Ethernet0/0/1
port link-type access
port default vlan 1
#
interface Ethernet0/0/2
port link-type access
port default vlan 1
#
interface Ethernet0/0/3
port link-type access
port default vlan 1
#
interface Ethernet0/0/4
port link-type access
port default vlan 1303
#
interface Ethernet0/0/5
port link-type access
port default vlan 1
#
interface Ethernet0/0/6
port link-type access
port default vlan 1
#
interface Ethernet0/0/7
port link-type access
port default vlan 2
#
interface Ethernet0/0/8
port link-type access
port default vlan 2
#
interface Ethernet0/0/9
port link-type access
port default vlan 2
#
interface Ethernet0/0/10
port link-type access
port default vlan 2
#
interface Ethernet0/0/11
port link-type access
port default vlan 2
#
interface Ethernet0/0/12
port link-type access
port default vlan 3
#
interface Ethernet0/0/13
port link-type access
port default vlan 3
#
interface Ethernet0/0/14
port link-type access
port default vlan 3
#
interface Ethernet0/0/15
port link-type access
port default vlan 3
#
interface Ethernet0/0/16
port link-type access
port default vlan 3
#
interface GigabitEthernet0/0/1
port link-type trunk
port trunk allow-pass vlan 1 2 to 3
#
interface GigabitEthernet0/0/2
5614
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
