linux查看san存储连接端口,存储 – Linux RHEL如何区分本地磁盘和SAN磁盘

你可以采取几种不同的方法.对于您的特定设置,有些可能更好或更差.请记住,严格来说,光纤通道驱动器并不一定意味着“SAN”或“存储阵列”.它可能只是一个实际的FC连接驱动器.

您可以检查驱动器所在的SCSI主机,如果您知道所有服务器都具有(即)QLogic卡,则可以进行过滤：

# lsscsi -H; lsscsi -g

[0] qla2xxx

[1] qla2xxx

[2] mptsas

[3] ata_piix

[4] ata_piix

[0:0:0:0] disk IBM 1814 FAStT 0916 /dev/sda /dev/sg0

[0:0:0:1] disk IBM 1814 FAStT 0916 /dev/sdb /dev/sg1

[0:0:0:2] disk IBM 1814 FAStT 0916 /dev/sdd /dev/sg3

[0:0:0:31] disk IBM Universal Xport 0916 - /dev/sg4

[1:0:0:0] disk IBM 1814 FAStT 0916 /dev/sdc /dev/sg2

[1:0:0:1] disk IBM 1814 FAStT 0916 /dev/sde /dev/sg5

[1:0:0:2] disk IBM 1814 FAStT 0916 /dev/sdf /dev/sg6

[1:0:0:31] disk IBM Universal Xport 0916 - /dev/sg7

检查有关设备的di VPD页面,查看它使用的协议.

# sg_vpd -p di /dev/sda

Device Identification VPD page:

Addressed logical unit:

designator type: NAA,code_set: Binary

0x600a0b80002664e2000026c349dda1ee

Target port:

designator type: NAA,code_set: Binary

transport: Fibre Channel (FCP-2)

0x200600a0b8266f7f

designator type: Relative target port,code_set: Binary

transport: Fibre Channel (FCP-2)

Relative target port: 0x1

Target device that contains addressed lu:

designator type: NAA,code_set: Binary

transport: Fibre Channel (FCP-2)

0x200600a0b8266f7e

使用特定存储阵列的路径管理工具检查设备是否在该阵列上.例如：

# sg_rdac /dev/sda

RDAC Legacy page

Controller serial: 1T63717016

Alternate controller serial: 1T64109650

RDAC mode (redundant processor): alternate controller present; Dual active mode

RDAC mode (alternate processor): alternate controller present; Dual active mode

Quiescence timeout: 75

RDAC option 0x6

LUN Table:

0: a a x x x x x x

1: x x x x x x x x

2: x x x x x x x x

3: x x x x x x x x

与：

# sg_rdac /dev/sda

invalid field in cdb (perhaps subpages or page control (PC) not supported)