树莓派: 驱动oled

一、下载模块

pip install Adafruit-SSD1306

安装PIL和 pillow模块
sudo apt-get install python3-pil 

sudo apt-get install python3-pillow

二、测试代码

import time
import os
import sys

import Adafruit_GPIO.SPI as SPI
import Adafruit_SSD1306

import Image
import ImageDraw
import ImageFont


# Raspberry Pi pin configuration:
RST = 24
# Note the following are only used with SPI:
DC = 23
SPI_PORT = 0
SPI_DEVICE = 0


# 128x32 display with hardware I2C:
#disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST)

# 128x64 display with hardware I2C:
disp = Adafruit_SSD1306.SSD1306_128_64(rst=RST)

# Note you can change the I2C address by passing an i2c_address parameter like:
# disp = Adafruit_SSD1306.SSD1306_128_64(rst=RST, i2c_address=0x3C)

# Alternatively you can specify an explicit I2C bus number, for example
# with the 128x32 display you would use:
# disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST, i2c_bus=2)

# 128x32 display with hardware SPI:
# disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST, dc=DC, spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE, max_speed_hz=8000000))

# 128x64 display with hardware SPI:
# disp = Adafruit_SSD1306.SSD1306_128_64(rst=RST, dc=DC, spi=SPI.SpiDev(SPI_PORT, SPI_DEVICE, max_speed_hz=8000000))

# Alternatively you can specify a software SPI implementation by providing
# digital GPIO pin numbers for all the required display pins.  For example
# on a Raspberry Pi with the 128x32 display you might use:
# disp = Adafruit_SSD1306.SSD1306_128_32(rst=RST, dc=DC, sclk=18, din=25, cs=22)

# Initialize library.
disp.begin()

# while 1:
# Clear display.
disp.clear()
disp.display()

# Create blank image for drawing.
# Make sure to create image with mode '1' for 1-bit color.
width = disp.width
height = disp.height
image = Image.new('1', (width, height))

# Get drawing object to draw on image.
draw = ImageDraw.Draw(image)

# Load default font.
default_font = ImageFont.load_default()

# Alternatively load a TTF font.  Make sure the .ttf font file is in the same directory as the python script!
# Some other nice fonts to try: http://www.dafont.com/bitmap.php

font = ImageFont.truetype('/usr/share/fonts/truetype/ttf-bitstream-vera/Vera.ttf',29) # 树莓派的字体库
sysinfo = os.popen('uptime').read()
strtime, strdate = sysinfo.split('up')
strdate, strtemp = strdate.split('user')
strdate = strdate[:-2]
struser = sysinfo[-42:-31]
strload = sysinfo[-18:]
                                                               
# Write two lines of text.
draw.text((0, 40), time.strftime("%X",time.localtime(time.time())) , font=font, fill=255)
draw.text((0, 0), strdate , font=default_font, fill=255)
draw.text((0, 10), struser , font=default_font, fill=255)
draw.text((0, 20), ' load average:' , font=default_font, fill=255)
draw.text((0, 30), strload , font=default_font, fill=255)
# Display image.
disp.image(image)
disp.display()
#time.sleep(5)