centos7安装L2TP 客户端配置，实战可以使用

linux添加L2Tp客户端
1、安装软件
yum install -y xl2tpd ppp

2. 配置xl2tpd
   编辑 /etc/xl2tpd/xl2tpd.conf 文件，内容如下：（最下面添加）
   [lns default]
   ip range = 192.168.2.128-192.168.2.254
   local ip = 192.168.2.99
   require chap = yes
   refuse pap = yes
   require authentication = yes
   name = LinuxVPNserver
   ppp debug = yes
   pppoptfile = /etc/ppp/options.xl2tpd
   length bit = yes
   #hnvpn 连接名称，后面控制连接时需要
   #name vpn帐号的用名户，由vpn服务器分配
   #lns vpn服务器ip地址
   #pppoptfile 连接选项

3. 配置连接选项
   编辑 /etc/ppp/peers/bjvpn.l2tpd 文件，内容如下：
   remotename hnvpn
   user “用户名”
   password “用户密码”
   unit 0
   nodeflate
   nobsdcomp
   noauth
   persist
   nopcomp
   noaccomp
   maxfail 5
   debug
   #remotename vpn名称
   #user vpn帐号用户名
   #password vpn帐号密码

4、查看 /var/log/messages 中是否有异常。
5、查看网卡
[root@ecs-25fe-0707468 ~]# ip a s
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether fa:16:3e:43:7a:a2 brd ff:ff:ff:ff:ff:ff
inet x.x.x.x./24 brd 192.168.1.255 scope global noprefixroute dynamic eth0
valid_lft 58634sec preferred_lft 58634sec
inet6 fe80::f816:3eff:fe43:7aa2/64 scope link noprefixroute
valid_lft forever preferred_lft forever
10: ppp0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1360 qdisc pfifo_fast state UNKNOWN group default qlen 3
link/ppp
inet 193.168.1.1 peer 193.168.1.252/32 scope global ppp0
valid_lft forever preferred_lft forever