三菱伺服fb块怎么下载_三菱fb功能块手册

三菱fb功能块手册

(88页)

本资源提供全文预览，点击全文预览即可全文预览,如果喜欢文档就下载吧，查找使用更方便哦！

11.90 积分

GXDEV8-O-FB-E 13JU44 SH(NA)-080376E-A(0302)MEE SW8D5C-GPPW-E Operating Manual (Function Block)Operating Manual MODEL MODEL CODE O GX Developer Version 8 Operating Manual (Function Block) (Function Block) G Specifications subject to change without notice. When exported from Japan, this manual does not require application to the Ministry of Economy, Trade and Industry for service transaction permission. HEAD OFFICE : 1-8-12, OFFICE TOWER Z 14F HARUMI CHUO-KU 104-6212,JAPAN NAGOYA WORKS : 1-14 , YADA-MINAMI 5 , HIGASHI-KU, NAGOYA , JAPAN A - 1 A - 1 ? SAFETY PRECAUTIONS ? (Always read these instructions before using this equipment.) Before using this product, please read this manual and the relevant manuals introduced in this manual carefully and pay full attention to safety to handle the product correctly. The instructions given in this manual are concerned with this product. For the safety instructions of the programmable controller system, please read the CPU module user's manual. In this manual, the safety instructions are ranked as “DANGER“ and “CAUTION“. !DANGER CAUTION ! Indicates that incorrect handling may cause hazardous conditions, resulting in death or severe injury. Indicates that incorrect handling may cause hazardous conditions, resulting in medium or slight personal injury or physical damage. Note that the !CAUTION level may lead to a serious consequence according to the circumstances. Always follow the instructions of both levels because they are important to personal safety. Please save this manual to make it accessible when required and always forward it to the end user. [Design Instructions] ! DANGER ? For data change, program change, and status control made to the PLC which is running from a Personal computer, configure the interlock circuit externally so that the system safety is ensured. The action to be taken for the system at the occurrence of communication errors caused by such as loose cable connection must be determined for online operation of PLC from Personal computers. ! CAUTION ? Before performing online operations (program change during PLC CPU RUN, forced I/O operation, RUN-STOP or similar operating condition change, remote operation) with the personal computer connected to the running PLC CPU, read the manual carefully and ensure safety fully. Note that program change during PLC CPU RUN (online change) may cause such problems as program corruption depending on the operation condition. Use the equipment after fully understanding the precautions given in the GX Developer Operating Manual. A - 2 A - 2 REVISIONS * The manual number is given on the bottom left of the back cover. Print Date * Manual Number Revision Feb., 2003 SH (NA)-080376E-A First edition Oct., 2003 SH (NA)-080376E-B Correction Section 3.13, Section 5 Jun., 2004 SH (NA)-080376E-C Correction Abbreviations and 关 键 词： 三菱 fb 功能块 手册

 天天文库所有资源均是用户自行上传分享，仅供网友学习交流，未经上传用户书面授权，请勿作他用。