10怎么读_“兲”怎么读,“嫑”是什么意思?10个有趣的汉字,你认识几个

自从有了文字,才有了文化。文字是一切文化开始的源头,尤其是我们中国的汉字,从甲骨文一直演变成今日我们所用的简体字。千年文化的传承中以汉字为载体,传承至今,流芳百世。

1b68a2ae144976ead0fdc7299e246f95.png

我们中国的汉字,经过几代的演变甲骨文,小篆,隶书,楷书等等。汉字最主要的核心是象形和音义,许慎曾也在《说文解字》中提到过我们汉字的构造以及来源。许慎之前,也有人发现我们汉字的奥妙,他便是仓颉。他根据六书造字的民间传说,对汉字进行了一系列的归纳和总结,来向世人证明汉字的来源与形成。

在古时,人们就发现,其实甲骨文时期,文字都是注重象形的。何为象形?例如"日"字,其实就是根据太阳的形状所幻化而成,"月"字也不例外。再例如说诚信的"信"字,左边部位是一个人,右边则是说的话,意思是作为一个人,说的话要言而有信。通过举例,我们发现其实文字,从早期发展开始就是图画象形而代表。

e84cb795a38f4684f5f99db2efcbfd2e.png

我们中国汉字中,中还有很多有意思的字形。比如说"森"字是由三个木头构成,而树木多了,不就形成了森林。同样的道理还有"众",三个人在一起,人多了,就成了众人。另外我们还有一些文字,将单个不同的字,叠罗汉又形成了新的文字。去看看有哪些字,是我们从前不知道的吧!

第一个字:"嫑"(biáo)

这个字拆开来看,上"不"下"要"。按照我们小时候读字的标准,连起来肯定是不要。但其实,它的正确发音与"表"相似,只不过这个字发第二声。这个字的第一个意思与它字面意思其实一样,就是不要的意思,还有一种意思则是骗人。

第二个字 "恏"(hào)

第二个字,上面一个好字,下面一个心字。虽然看上去是好心,但这个字的意思却代表欲望。

9ef5daebb159669c11051e60555963f7.png

第三个字 "氼"(nì)

俗话说得好,女人都是水做的。这个字上面是水,下面是人。构成了"氼"与现在的"溺"同音同意。人在水的下面,可不就是人沉在水下的意思。古人常用"氼"来表示有人溺水。

第四个字"怹"(tān)

这个字和"您"相似,用法也一样。我们通常用您,来表示你尊称长辈。而"怹"也是他的敬称,这是老北京人的用法,但现在却鲜为人知,少有人用了。

第五个字 "烎"(yín)

这个字很有意思,上下连起来读"开火"。听起来就很热血沸腾,然而这个字还真就是这个意思。"烎"表示光明,霸气,斗志昂扬,曾经就有一支比赛队伍取名叫"烎队"既与"赢"同音,又有无限的动力。

3d0f68ffa97691b7dec16a6c9d8b7bac.png

第六个字 "㚻"(jī)

这个字与我们现在的"男"字相似,但下面是个"女"字。这个字指的就是古代的断袖,而且是男子喜欢男子才可以用。

第七个字"颪"(guā)

下风,从高处吹来的风,这个字与"刮"字同音,并且它指的意思就是刮风。这个字非常符合象形字的概念。

第八个字 "巭"(gū)

这个字特别有意思,拆解下来念功夫。最初这个字代指工作人员,在《功夫熊猫》放映后,这个词阴差阳错构成了有功夫人的代表。

8d7a60ffc7024123fca0fb0204f975f4.png

第九个字"忈"(rén)

别看这个字,由二心构成,古代这个字表示仁爱之义。可后来人们又觉得,"二心"是不专一,做事有二心,三心二意。

最后一个字 "兲"(tiān)

这可不是一个骂人的字,虽字形上是"王八",但与"天"是一个意思,在古代"兲"也是一个生僻字,古时候人们也常说"兲兲不应"。

7308058feb8debd81dab0474e52d6232.png

后来成为网络用语,被网友们调侃"问候"你不喜欢的人,同时还有"兲"蛋的趣味用法。汉字艺术是我们中国独有的文化艺术,今日我们介绍的这十个中国有趣的汉字,你都记住了么?

### ESP32 SPI_FAST_FLASH_BOOT Configuration and Issues For the ESP32, configuring `SPI_FAST_FLASH_BOOT` involves setting up specific parameters that ensure fast booting from flash memory using the SPI interface. This configuration is crucial for optimizing performance during startup. The primary consideration when enabling `SPI_FAST_FLASH_BOOT` lies in ensuring proper initialization of the SPI bus used by both the system and peripherals like an LCD screen or touchscreens connected via SPI interfaces such as SPI2 or SPI3 on S3 models[^1]. When configuring this feature: - The bootloader must be set to use a higher clock speed supported by the selected SPI mode. - Flash voltage levels should match those required by the microcontroller's operating conditions. - Ensure no conflicts exist between GPIO pins assigned for general-purpose I/O operations versus dedicated functions within the SPI peripheral setup described earlier. Additionally, it’s important to note how different development environments handle these settings. For instance, PlatformIO users might need to adjust project configurations through environment variables while working with VSCode IDE extensions specifically tailored towards Espressif platforms[^2]. In terms of potential issues related to `SPI_FAST_FLASH_BOOT`, common problems include incorrect timing adjustments leading to data corruption or failed reads/writes from/to external memories. Another issue could arise if there are mismatches between expected and actual hardware capabilities regarding frequency support across various components involved in communication over the SPI lines. To mitigate risks associated with implementing faster boot times via SPI-based flashes, thorough testing under diverse environmental scenarios alongside careful review of component datasheets becomes essential before finalizing any design choices around this functionality. ```cpp // Example code snippet showing part of the spi_flash_init function call which may involve setting up SPI_FAST_FLASH_BOOT option #include "esp_spi_flash.h" void configureFastBoot() { esp_err_t ret; spi_flash_chip_driver_t driver; // Initialize the SPI flash chip with high-speed settings suitable for fast boot ret = spi_flash_initialize(&driver); } ``` --related questions-- 1. What are some best practices for selecting appropriate frequencies for SPI communications? 2. How does one diagnose and resolve data integrity issues arising from misconfigured SPI timings? 3. Can you provide guidance on choosing compatible flash chips for achieving optimal performance with SPI_FAST_FLASH_BOOT enabled? 4. Are there alternative methods besides adjusting SPI speeds to improve boot time efficiency in embedded systems based on ESP32?
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值