1.局部坐标系建立:
Abaqus中提供了两种方法:1.transform 2.orientation
1.
transform
REQUIRED PARAMETER
NSET
OPTIONAL PARAMETER
TYPE (R (DEFAULT) 直角坐标系)(C 柱坐标系)
(S 球坐标系)
First line
1.Clobal X-coordinate of point a specifying
transformation.
2.Clobal Y-coordinate of point a specifying
transformation.
3.Clobal Z-coordinate of point a specifying
transformation.
4.Clobal X-coordinate of point b specifying
transformation.
5.Clobal Y-coordinate of point b specifying
transformation.
6.Clobal Z-coordinate of point b specifying
transformation.
其中a,b的定义是这样的:
对于R
a 是X轴上一点,b是y轴上一点,原点和原先的重合
对于C
a,b定义了Z轴方向。
对于S
a,b定义了Z轴方向。(平行)
说明:
* transform 下面只能有一行六个参数,
分别三个一组&