1.1.1AP瘦切胖配置案例(Bootrom)
1.使用Console口登入到命令行,从官网下载4330的软件版本,将压缩包解压,将里面的文件名称修改为wa4300_fat.bin
2.电脑网卡设置为:192.168.0.1 255.255.255.0,如下例子打开TFTP服务器,把软件版本wa4300_fat.bin放到电脑桌面上,TFTP服务器目录指向电脑桌面,然后点击确定
3.在AP重启的时候按住Ctrl+B进入设备的bootroom菜单,以下标黑部分为设备自动打印部分,标红加粗的命令是需要手动输入。
===============
MENU>=========================
|<1> Boot System
|<2> Enter Serial SubMenu
|<3> Enter Ethernet SubMenu
|<4> File Control
|<5> Restore to Factory Default
Configuration
|<6> Skip Current System
Configuration
|<7> BootWare Operation Menu
|<8> Clear Super Password
|<9> Storage Device Operation
|<0> Reboot
===============================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): Ctrl+F
y
Enter your choice(0-9): 3(此处输入)
================
SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To
SDRAM And Run
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|
Before Downloading!>
=============================================================
4.进入修改以太网参数菜单,使用TFTP网络协议传输wa2600a_fat.bin到AP上
Enter your choice(0-5): 5
===========
SET>=====================
|Note:'.' = Clear field.
|'-' = Go to previous field.
|Ctrl+D = Quit.
===============================================================
Protocol (FTP or TFTP) : TFTP
//忽略输出内容,直接输入TFTP,然后回车
Load File Name:wa4300_fat.bin
//忽略输出内容,直接输入wa2600a_fat.bin,然后回车
Target File Name:wa4300_fat.bin
//忽略输出内容,直接输入wa2600a_fat.bin,然后回车
Server IP Address:192.168.0.1
//忽略输出内容,直接输入电脑主机的IP,比如192.168.0.1,然后回车
Local IP Address:192.168.0.50
//忽略输出内容,直接输入呵电脑主机的ip同一网段,比如192.168.0.50,然后回车
Gateway IP Address:0.0.0.0
//忽略输出内容,直接回车
备注:注意给电脑手动配置一个与AP同网段的IP地址,保证电脑与AP路由可达,能ping通
=============
SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To
SDRAM And
|<2> Update Main Application File
|<3> Update Backup Application File
|<4> Update Secure Application File
|<5> Modify Ethernet Parameter
|<0> Exit To Main Menu
|
Before Downloading!>
=============================================================
Enter your choice(0-5): 2//此时可以看到TFTP服务器上数据上传的滚动
Loading.....................................................................
....................................Done!
5.返回主菜单,查看设备上是否真的已经上传了该软件版本
=================
SubMenu>==========================
|Note:the operating device is flash
|<1> Download Application Program To
SDRAM And R
|<2> Update Main Application File
|<3> Update Backup Application Fil
|<4> Update Secure Application File
|<5> Modify Ethernet Parameter
||<0> Exit To Main Menu
|
Before Downloading!>
|=================================================================
Enter your choice(0-5): 0
===============
MENU>===========================
<1> Boot System
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Restore to Factory Default
Configuration
<6> Skip Current System Configuration
<7> BootWare Operation Menu
<8> Clear Super Password
<9> Storage Device Operation
<0>Reboot==========================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 4
=====================
CONTROL>===============================
|Note:the operating device is flash
<1> Display All File(s)
<2> Set Application File type
<3> Delete File
<0> Exit To Main Menu
==============================================================
Enter your choice(0-3): 1
Display all file(s) in flash:
'M' = MAIN'B' =
BACKUP'S' = SECURE'N/A' = NOT ASSIGNED
|NO. Size(B)TimeTypeName
||19124864Aug/08/2008 20:00:00
Mwa2600a_fat.bin
==============================================================
6.返回主菜单,将设备进行重启
|Note:the operating device is flash
<1> Display All File(s)
<2> Set Application File type
<3> Delete File
<0> Exit To Main Menu
=================================================================
Enter your choice(0-3):0
==================
MENU>===========================
<1> Boot System
<2> Enter Serial SubMenu
<3> Enter Ethernet SubMenu
<4> File Control
<5> Restore to Factory Default
Configuration
<6> Skip Current System Configuration
<7> BootWare Operation Menu
<8> Clear Super Password
<9> Storage Device Operation
<0>Reboot==================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 0
System is starting...
7.重启设备完成后就可以使用默认的管理地址192.168.0.50登录AP进行管理了。登录AP的默认用户名是admin,密码是h3capadmin。