micropython 驱动oled0.91_PYB Nano驱动OLED显示

这是论坛网友hbzjt2012的作品:

http://www.micropython.org.cn/forum.php?mod=viewthread&tid=408&extra=

这次使用PYB Nano驱动0.96寸OLED显示屏，此次参考了国外网友的例程，OLED可以使用SPI或者I2C均可。

【1】硬件连接：

这里以SPI连接方式为例，使用PYB Nano的SPI1：

【2】程序源码：

库文件：SSD1306

import pyb

from ssd1306 import SSD1306

# SPI

display = SSD1306(pinout={'dc': 'Y9',

'res': 'Y10'},

height=64,

external_vcc=False)

# I2C connected to Y9, Y10 (I2C bus 2)

# display = SSD1306(pinout={'sda': 'Y10',

#                           'scl': 'Y9'},

#                   height=64,

#                   external_vcc=False)

led_red = pyb.LED(1)

led_red.off()

try:

display.poweron()

display.init_display()

display.draw_text(1,1,'PYB Nano OLED Test',size=1,space=1)

display.draw_text(1,10,'Hello MicroPython!',size=1,space=1)

# Write display buffer

display.display()

pyb.delay(10000)

x = 0

y = 0

direction_x = True

direction_y = True

while True:

# Clear the previous lines

prev_x = x

prev_y = y

# Move bars

x += (1 if direction_x else -1)

y += (1 if direction_y else -1)

# Bounce back, if required

if x == 128:

direction_x = False

x = 126

elif x == -1:

direction_x = True

x = 1

if y == 64:

direction_y = False

y = 63

elif y == -1:

direction_y = True

y = 1

# Draw new lines

for i in range(64):

display.set_pixel(prev_x, i, False)

display.set_pixel(x, i, True)

for i in range(128):

display.set_pixel(i, prev_y, False)

display.set_pixel(i, y, True)

# Make sure the corners are active

display.set_pixel(0,   0,  True)

display.set_pixel(127, 0,  True)

display.set_pixel(0,   63, True)

display.set_pixel(127, 63, True)

# Write display buffer

display.display()

except Exception as ex:

led_red.on()

print('Unexpected error: {0}'.format(ex))

display.poweroff()

【3】显示效果：