本文有关栈的介绍部分参考自网站数据结构。
1. 队列
1.1 队列的定义
队列(Queue)是只允许在一端进行插入,而在另一端进行删除的运算受限的线性表。
(1)允许删除的一端称为队头(Front)。
(2)允许插入的一端称为队尾(Rear)。
(3)当队列中没有元素时称为空队列。
(4)队列亦称作先进先出(First In First Out)的线性表,简称为FIFO表。
队列的修改是依先进先出的原则进行的。新来的成员总是加入队尾(即不允许"加塞"),每次离开的成员总是队列头上的(不允许中途离队),即当前"最老的"成员离队。
【例】在队列中依次加入元素a1,a2,…,an之后,a1是队头元素,an是队尾元素。退出队列的次序只能是a1,a2,…,an。
1.2 队列的运算
(1)initQueue(Q)
置空队。构造一个空队列Q。
(2)isEmpty(Q)
判队空。若队列Q为空,则返回真值,否则返回假值。
(3) isFull(Q)
判队满。若队列Q为满,则返回真值,否则返回假值。
注意:
此操作只适用于队列的顺序存储结构。
(4) enQueue(Q,x)
若队列Q非满,则将元素x插入Q的队尾。此操作简称入队。
(5) deQueue(Q)
若队列Q非空,则删去Q的队头元素,并返回该元素。此操作简称出队。
(6) front(Q)
若队列Q非空,则返回队头元素,但不改变队列Q的状态。
2. 实现
在实现的时候,队列的基本函数都有(isEmpty、enQueue、deQueue、front)。因为我是用面向对象的方法来设计队列,所以队列的初始化、拷贝构造、赋值运算符重载等也都具备。另外,我采取了C++中的模板类来设计队列,使得队列设计能适应更多的场合。
队列的实现跟栈的实现没什么大的区别,只需代码细小的修改就OK了。所以,在这里,我只给出基于静态数组的队列的设计。
2.1 基于静态数组
基于静态数组的队列的最大特点就是队列的大小是固定的,用户在初始化之后就无法改变。在编译期,编译器就已经给这个队列分配好内存,在“内存的栈”上分配。
这是我所设计的队列模板类:
1 template
2 classQueue3 {4 public:5 Queue();6 virtual ~Queue();7 boolisEmpty();8 bool enQueue(T val); //通过在队尾添加一个值来改变队列。
9 T front(); //访问队首的值,保持队列不变。
10 bool deQueue(); //通过删除队首的值来改变一个队列。
11 intgetSizeOfQueue();12
13 private:14 T queue[defCapacity];15 intsizeOfQueue;16
17 };
具体实现代码为:
1 #include
2 #include
3 using namespacestd;4
5 //const int CAPACITY = 1024;
6
7 template
8 classQueue9 {10 public:11 Queue();12 virtual ~Queue();13 boolisEmpty();14 bool enQueue(T val); //通过在队尾添加一个值来改变队列。
15 T front(); //访问队首的值,保持队列不变。
16 bool deQueue(); //通过删除队首的值来改变一个队列。
17 intgetSizeOfQueue();18
19 private:20 T queue[defCapacity];21 intsizeOfQueue;22
23 };24
25
26 template
27 Queue::Queue()28 {29 sizeOfQueue = 0;30 }31
32 template
33 Queue::~Queue()34 {35
36 }37
38 template
39 bool Queue::isEmpty()40 {41 return sizeOfQueue == 0;42 }43
44 template
45 bool Queue::enQueue(T val)46 {47 //assert(sizeOfQueue < defCapacity);
48 bool isSuccess = true;49 if (sizeOfQueue ==defCapacity)50 {51 cerr << "There is no space for new elements." <
55 {56 queue[sizeOfQueue] =val;57 sizeOfQueue++;58 }59 returnisSuccess;60 }61
62 template
63 T Queue::front()64 {65 //assert(sizeOfQueue > 0);
66 if (sizeOfQueue == 0)67 {68 cerr << "There is no elements in the queue." <
73 template
74 bool Queue::deQueue()75 {76 //assert(sizeOfQueue > 0);
77 bool isSuccess = true;78 if (sizeOfQueue == 0)79 {80 cerr << "There is no element in Queue." <
84 {85 for (int i = 0; i < sizeOfQueue - 1; i++)86 {87 queue[i] = queue[i + 1];88 }89 sizeOfQueue--;90 }91 returnisSuccess;92 }93
94 template
95 int Queue::getSizeOfQueue()96 {97 returnsizeOfQueue;98 }
queue.hpp
Boost单元测试代码为:
1 #define BOOST_TEST_MODULE Stack_Test_Module
2
3 #include "stdafx.h"
4 #include "../Queue/queue.hpp"
5
6 const int MAXSIZE = 3;7 structStack_Fixture8 {9 public:10 Stack_Fixture()11 {12 testQueue = new Queue();13 }14
15 ~Stack_Fixture()16 {17 delete testQueue;18 }19
20 Queue *testQueue;21 };22
23
24
25 BOOST_FIXTURE_TEST_SUITE(Stack_Test_Fixture, Stack_Fixture)26
27 BOOST_AUTO_TEST_CASE(Queue_Test)28 {29 //isEmpty ------------------------------------
30 BOOST_REQUIRE(testQueue->isEmpty() == true);31
32 //isEmpty ------------------------------------
33 BOOST_REQUIRE(testQueue->getSizeOfQueue() == 0);34
35 //enQueue & front ---------------------------------
36 BOOST_REQUIRE(testQueue->enQueue(1) == true);37 BOOST_REQUIRE(testQueue->front() == 1);38 BOOST_REQUIRE(testQueue->getSizeOfQueue() == 1);39
40 BOOST_REQUIRE(testQueue->enQueue(2) == true);41 BOOST_REQUIRE(testQueue->front() == 1);42 BOOST_REQUIRE(testQueue->getSizeOfQueue() == 2);43
44 BOOST_REQUIRE(testQueue->enQueue(3) == true);45 BOOST_REQUIRE(testQueue->front() == 1);46 BOOST_REQUIRE(testQueue->getSizeOfQueue() == 3);47
48 BOOST_REQUIRE(testQueue->enQueue(3) == false);49 BOOST_REQUIRE(testQueue->front() == 1);50 BOOST_REQUIRE(testQueue->getSizeOfQueue() == 3);51
52 //deQueue & front ----------------------------------
53 BOOST_REQUIRE(testQueue->deQueue() == true);54 BOOST_REQUIRE(testQueue->front() == 2);55 BOOST_REQUIRE(testQueue->getSizeOfQueue() == 2);56
57 BOOST_REQUIRE(testQueue->deQueue() == true);58 BOOST_REQUIRE(testQueue->front() == 3);59 BOOST_REQUIRE(testQueue->getSizeOfQueue() == 1);60
61 BOOST_REQUIRE(testQueue->deQueue() == true);62 BOOST_REQUIRE(testQueue->getSizeOfQueue() == 0);63
64 BOOST_REQUIRE(testQueue->deQueue() == false);65
66 }67
68
69 BOOST_AUTO_TEST_SUITE_END()
BoostUnitTest.cpp
2.2 基于动态数组
2.3 基于指针