几天前,我已经为android创建了pyton文件夹,但是忘了包含一些模块。所以我只想再做一次。。。在
这是一个结果/分发.sh在Python build finished, but the necessary bits to build these modules were not found:
_bsddb _curses _curses_panel
_sqlite3 _ssl _tkinter
bsddb185 bz2 dbm
gdbm linuxaudiodev ossaudiodev
sunaudiodev
To find the necessary bits, look in setup.py in detect_modules() for the module's name.
Failed to build these modules:
readline
Call build_python
Entering in ARM environment
Compiler found at /home/pawel/.buildozer/android/platform/android-ndk-r9c//toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin//arm-linux-androideabi-gcc
configure: WARNING: if you wanted to set the --build type, don't use --host.
If a cross compiler is detected then cross compile mode will be used
checking for --enable-universalsdk... no
checking for --with-universal-archs... 32-bit
checking MACHDEP... linux3
checking EXTRAPLATDIR...
checking machine type as reported by uname -m... i686
checking for --without-gcc... no
checking for arm-eabi-gcc... ccache arm-linux-androideabi-gcc -DANDROID -mandroid -fomit-frame-pointer --sysroot /home/pawel/.buildozer/android/platform/android-ndk-r9c//platforms/android-21/arch-arm
checking whether the C compiler works... no
configure: error: in `/home/pawel/python-for-android/build/python/Python-2.7.2':
configure: error: C compiler cannot create executables
See `config.log' for more details
这是结束配置日志公司名称:
^{pr2}$
这可能是最有趣的部分:configure:3585: checking whether the C compiler works
configure:3607: ccache arm-linux-androideabi-gcc -DANDROID -mandroid -fomit-frame-pointer --sysroot /home/pawel/.buildozer/android/platform/android-ndk-r9c//platforms/android-21/arch-arm -DANDROID -mandroid -fomit-frame-pointer --sysroot /home/pawel/.buildozer/android/platform/android-ndk-r9c//platforms/android-21/arch-arm -lm conftest.c >&5
/home/pawel/.buildozer/android/platform/android-ndk-r9c/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot open crtbegin_dynamic.o: No such file or directory
/home/pawel/.buildozer/android/platform/android-ndk-r9c/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot open crtend_android.o: No such file or directory
/home/pawel/.buildozer/android/platform/android-ndk-r9c/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lm
/home/pawel/.buildozer/android/platform/android-ndk-r9c/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -lc
/home/pawel/.buildozer/android/platform/android-ndk-r9c/toolchains/arm-linux-androideabi-4.8/prebuilt/linux-x86/bin/../lib/gcc/arm-linux-androideabi/4.8/../../../../arm-linux-androideabi/bin/ld: error: cannot find -ldl
collect2: error: ld returned 1 exit status
configure:3611: $? = 1
configure:3649: result: no
我已经在谷歌上搜索了好几个小时了。。所以现在我要问你
环境设置为:export ANDROIDNDK="/home/user/.buildozer/android/platform/android-ndk-r9c/"
export ANDROIDSDK="/home/user/.buildozer/android/platform/android-sdk-21/"
export PATH=$ANDROIDNDK:$ANDROIDSDK/platform-tools:$ANDROIDSDK/tools:$PATH
导出ANDROIDAPI=21
导出ANDROIDNDKVER=r9c