linux 串口 结束符,串口接收数据能不能以字符串结束符来标识字符串接收完成...

串口接收数据能不能以字符串结束符来标识字符串接收完成，我弄了好久没弄出来，哪位大神指点一下

#include "stm32f10x.h"

#include "usart1.h"

#include "led.h"

#include "delay.h"

void my_USART1_Init(u32 bound)

{

GPIO_InitTypeDef GPIO_InitStruct;

USART_InitTypeDef USART_InitStruct;

NVIC_InitTypeDef NVIC_InitStruct;

RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA,ENABLE);

RCC_APB2PeriphClockCmd(RCC_APB2Periph_USART1,ENABLE);

USART_DeInit(USART1);

GPIO_InitStruct.GPIO_Mode=GPIO_Mode_AF_PP;

GPIO_InitStruct.GPIO_Pin=GPIO_Pin_9;

GPIO_InitStruct.GPIO_Speed=GPIO_Speed_50MHz;

GPIO_Init(GPIOA,&GPIO_InitStruct);

GPIO_InitStruct.GPIO_Mode=GPIO_Mode_IN_FLOATING;

GPIO_InitStruct.GPIO_Pin=GPIO_Pin_10;

GPIO_InitStruct.GPIO_Speed=GPIO_Speed_50MHz;

GPIO_Init(GPIOA,&GPIO_InitStruct);

USART_InitStruct.USART_BaudRate=bound;

USART_InitStruct.USART_HardwareFlowControl=USART_HardwareFlowControl_None;

USART_InitStruct.USART_Mode=USART_Mode_Rx|USART_Mode_Tx;

USART_InitStruct.USART_Parity=USART_Parity_No;

USART_InitStruct.USART_StopBits=USART_StopBits_1;

USART_InitStruct.USART_WordLength=USART_WordLength_8b;

USART_Init(USART1,&USART_InitStruct);

NVIC_InitStruct.NVIC_IRQChannel=USART1_IRQn;

NVIC_InitStruct.NVIC_IRQChannelCmd=ENABLE;

NVIC_InitStruct.NVIC_IRQChannelPreemptionPriority=2;

NVIC_InitStruct.NVIC_IRQChannelSubPriority=2;

NVIC_Init(&NVIC_InitStruct);

USART_ITConfig(USART1,USART_IT_RXNE,ENABLE);

USART_Cmd(USART1,ENABLE);

}

u8 buff[200];

u16 i=0;

u16 fl = 0;

void USART1_IRQHandler()

{

u8 temp;

if(USART_GetITStatus(USART1, USART_IT_RXNE))

{

if(USART_GetFlagStatus(USART1, USART_FLAG_RXNE))

{

temp = USART_ReceiveData(USART1);

buff[i]= temp;

i++;

if(temp == 0)

{

fl = 1;

GPIO_SetBits(GPIOB,GPIO_Pin_5 ); //输出高电平

}

else

{

GPIO_ResetBits(GPIOB,GPIO_Pin_5 ); //输出低电平

fl = 0;

}

}

}

}