linux 格式化 目录,Linux 磁盘分区、格式化、目录挂载

实验环境: Citrix虚拟化, RHEL6.4系统环境本文目的: 熟悉Linux的基本磁盘分区、格式化、目录挂载。 1.显示当前主机目录2.磁盘分区

实验环境: Citrix虚拟化, RHEL6.4系统环境

本文目的: 熟悉Linux的基本磁盘分区、格式化、目录挂载。

1.显示当前主机目录

2.磁盘分区

3.磁盘格式化

4.挂载目录

1. 显示当前主机目录

命令df -h

[root@localhost ~]# df -h

Filesystem            Size  Used Avail Use% Mounted on

/dev/mapper/VolGroup-lv_root

26G  2.9G  22G  13% /

tmpfs                1.9G    0  1.9G  0% /dev/shm

/dev/xvda1            485M  32M  428M  7% /boot

2. 磁盘分区

2.1 显示机器当前的磁盘:

命令fdisk -l

[root@localhost ~]# fdisk -l /dev/xvdb

Disk /dev/xvdb: 53.7 GB, 53687091200 bytes

255 heads, 63 sectors/track, 6527 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

注:这里知道新增磁盘为/dev/xvdb,就直接指定了,缩减显示篇幅。

2.2 fdisk 分区 /dev/xvdb:

fdisk /dev/xvdb 根据帮助提示分区,这里是把/dev/xvdb分成一个区.

[root@localhost ~]# fdisk /dev/xvdb

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0x0adfd119.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to

switch off the mode (command 'c') and change display units to

sectors (command 'u').

Command (m for help): m

Command action

a  toggle a bootable flag

b  edit bsd disklabel

c  toggle the dos compatibility flag

d  delete a partition

l  list known partition types

m  print this menu

n  add a new partition

o  create a new empty DOS partition table

p  print the partition table

q  quit without saving changes

s  create a new empty Sun disklabel

t  change a partition's system id

u  change display/entry units

v  verify the partition table

w  write table to disk and exit

x  extra functionality (experts only)

Command (m for help): n

Command action

e  extended

p  primary partition (1-4)

p

Partition number (1-4): 1

First cylinder (1-6527, default 1):

Using default value 1

Last cylinder, +cylinders or +size{K,M,G} (1-6527, default 6527):

Using default value 6527

Command (m for help): p

Disk /dev/xvdb: 53.7 GB, 53687091200 bytes

255 heads, 63 sectors/track, 6527 cylinders

Units = cylinders of 16065 * 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x0adfd119

Device Boot      Start        End      Blocks  Id  System

/dev/xvdb1              1        6527    52428096  83  Linux

Command (m for help): w

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

3. 磁盘格式化

命令mkfs.ext4 /dev/xvdb1分区为ext4的文件系统格式。

[root@localhost ~]# mkfs.ext4 /dev/xvdb1

mke2fs 1.41.12 (17-May-2010)

Filesystem label=

OS type: Linux

Block size=4096 (log=2)

Fragment size=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

3276800 inodes, 13107024 blocks

655351 blocks (5.00%) reserved for the super user

First data block=0

Maximum filesystem blocks=4294967296

400 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

4096000, 7962624, 11239424

Writing inode tables: done

Creating journal (32768 blocks): done

Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 28 mounts or

180 days, whichever comes first.  Use tune2fs -c or -i to override.

4.挂载目录

4.1 手工挂载

新建目录/u01mkdir -p /u01

挂载设备到目录/u01mount /dev/xvdb1 /u01

[root@localhost ~]# mkdir -p /u01

[root@localhost ~]# mount /dev/xvdb1 /u01

4.2 开机自动挂载