Use the ibv_devinfo command to verify that the ports are active.
Procedure
To view the port status of your hardware, run the ibv_devinfo command and look for the following output:
Note:
In the following output, the port_lid return refers to the local identifier (LID) of that port. This LID is unique within the InfiniBand subnet.
The port: 1 return refers to the first physical port on the adapter.
例子:
[root@node2 ~]# ibv_devinfo
hca_id:mlx4_0
transport:InfiniBand (0)
fw_ver:2.35.5100
node_guid:248a:0703:005d:07f0
sys_image_guid:248a:0703:005d:07f3
vendor_id:0x02c9
vendor_part_id:4099
hw_ver:0x1
board_id:MT_1090120019
phys_port_cnt:2
port:1
state:PORT_ACTIVE (4)
max_mtu:4096 (5)
active_mtu:4096 (5)
sm_lid:4
port_lid:4
port_lmc:0x00
link_layer:InfiniBand
port:2
state:PORT_ACTIVE (4)
max_mtu:4096 (5)
active_mtu:4096 (5)
sm_lid:8
port_lid:12
port_lmc:0x00
link_layer:InfiniBand
[root@node2 ~]#