linux下获取HCA信息,ifconfig命令显示HCA卡IP地址的问题

[root@rac1 ~]# ifconfig -a

enp3s0f0: flags=4163  mtu 1500

inet 192.168.100.101  netmask 255.255.255.0  broadcast 192.168.100.255

inet6 fe80::ec4:7aff:feac:3cc8  prefixlen 64  scopeid 0x20

ether 0c:c4:7a:ac:3c:c8  txqueuelen 1000  (Ethernet)

RX packets 1708659  bytes 1055516580 (1006.6 MiB)

RX errors 0  dropped 1856  overruns 0  frame 0

TX packets 783834  bytes 183429513 (174.9 MiB)

TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

device memory 0xc7620000-c7640000

enp3s0f0:1: flags=4163  mtu 1500

inet 192.168.100.107  netmask 255.255.255.0  broadcast 192.168.100.255

ether 0c:c4:7a:ac:3c:c8  txqueuelen 1000  (Ethernet)

device memory 0xc7620000-c7640000

enp3s0f1: flags=4098  mtu 1500

ether 0c:c4:7a:ac:3c:c9  txqueuelen 1000  (Ethernet)

RX packets 0  bytes 0 (0.0 B)

RX errors 0  dropped 0  overruns 0  frame 0

TX packets 0  bytes 0 (0.0 B)

TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

device memory 0xc7600000-c7620000

ib0: flags=4163  mtu 2044

inet 10.10.10.101  netmask 255.255.255.0  broadcast 10.10.10.255

inet6 fe80::7efe:9003:91:7ed1  prefixlen 64  scopeid 0x20

Infiniband hardware address can be incorrect! Please read BUGS section in ifconfig(8).--------->注意此处!

infiniband 80:00:00:48:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00  txqueuelen 256  (InfiniBand)

RX packets 152742  bytes 16275415 (15.5 MiB)

RX errors 0  dropped 0  overruns 0  frame 0

TX packets 197013  bytes 15793636 (15.0 MiB)

TX errors 0  dropped 11 overruns 0  carrier 0  collisions 0

ib1: flags=4163  mtu 2044

inet 1.1.1.101  netmask 255.255.255.0  broadcast 1.1.1.255

inet6 fe80::7efe:9003:91:7ed2  prefixlen 64  scopeid 0x20

Infiniband hardware address can be incorrect! Please read BUGS section in ifconfig(8).--------->注意此处!

infiniband 80:00:00:49:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00  txqueuelen 256  (InfiniBand)

RX packets 28753040  bytes 27216942068 (25.3 GiB)

RX errors 0  dropped 0  overruns 0  frame 0

TX packets 25737856  bytes 21898064798 (20.3 GiB)

TX errors 0  dropped 13 overruns 0  carrier 0  collisions 0

ib1:1: flags=4163  mtu 2044

inet 169.254.85.174  netmask 255.255.0.0  broadcast 169.254.255.255

Infiniband hardware address can be incorrect! Please read BUGS section in ifconfig(8).--------->注意此处!

infiniband 80:00:00:49:FE:80:00:00:00:00:00:00:00:00:00:00:00:00:00:00  txqueuelen 256  (InfiniBand)

lo: flags=73  mtu 65536

inet 127.0.0.1  netmask 255.0.0.0

inet6 ::1  prefixlen 128  scopeid 0x10

loop  txqueuelen 0  (Local Loopback)

RX packets 3296963  bytes 3310546982 (3.0 GiB)

RX errors 0  dropped 0  overruns 0  frame 0

TX packets 3296963  bytes 3310546982 (3.0 GiB)

TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

[root@rac1 ~]#

后来查了查mellanox官网的文章，原来需要用ip addr show命令来显示HCA的IP地址,如下:

[root@rac1 ~]# ip addr show

1: lo: mtu 65536 qdisc noqueue state UNKNOWN

link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00

inet 127.0.0.1/8 scope host lo

valid_lft forever preferred_lft forever

inet6 ::1/128 scope host

valid_lft forever preferred_lft forever

2: enp3s0f0: mtu 1500 qdisc mq state UP qlen 1000

link/ether 0c:c4:7a:ac:3c:c8 brd ff:ff:ff:ff:ff:ff

inet 192.168.100.101/24 brd 192.168.100.255 scope global enp3s0f0

valid_lft forever preferred_lft forever

inet 192.168.100.107/24 brd 192.168.100.255 scope global secondary enp3s0f0:1

valid_lft forever preferred_lft forever

inet6 fe80::ec4:7aff:feac:3cc8/64 scope link

valid_lft forever preferred_lft forever

3: enp3s0f1: mtu 1500 qdisc noop state DOWN qlen 1000

link/ether 0c:c4:7a:ac:3c:c9 brd ff:ff:ff:ff:ff:ff

4: ib0: mtu 2044 qdisc pfifo_fast state UP qlen 256

link/infiniband 80:00:00:48:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:91:7e:d1 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff

inet 10.10.10.101/24 brd 10.10.10.255 scope global ib0

valid_lft forever preferred_lft forever

inet6 fe80::7efe:9003:91:7ed1/64 scope link

valid_lft forever preferred_lft forever

5: ib1: mtu 2044 qdisc pfifo_fast state UP qlen 256

link/infiniband 80:00:00:49:fe:80:00:00:00:00:00:00:7c:fe:90:03:00:91:7e:d2 brd 00:ff:ff:ff:ff:12:40:1b:ff:ff:00:00:00:00:00:00:ff:ff:ff:ff

inet 1.1.1.101/24 brd 1.1.1.255 scope global ib1

valid_lft forever preferred_lft forever

inet 169.254.85.174/16 brd 169.254.255.255 scope global ib1:1

valid_lft forever preferred_lft forever

inet6 fe80::7efe:9003:91:7ed2/64 scope link

valid_lft forever preferred_lft forever

[root@rac1 ~]#

原因是:

ifconfig is obsolete according to Red Hat, also it shows the followng message when running it when IPoIB interfaces exists:

Ifconfig uses the ioctl access method to get the full address information, which limits hardware addresses to 8 bytes.

Because Infiniband address has 20 bytes, only the first 8 bytes are displayed correctly.

Ifconfig is obsolete! For replacement check ip.