丝印gl852gt_創惟科技股份有限公司

•    Compliant to USB specification Revision 2.0

-    4 downstream ports

-    Upstream port supports both high-speed (HS) and full-speed (FS) traffic

-    Downstream ports support HS, FS, and low-speed (LS) traffic

-    1 control pipe (endpoint 0, 64-byte data payload) and 1 interrupt pipe (endpoint 1, 1-byte data payload)

-    Backward compatible to USB specification Revision 1.1

•      On-chip 8-bit micro-processor

-    RISC-like architecture

-    USB optimized instruction set

-    Dual cycle instruction execution

-    Performance: 6 MIPS @ 12MHz

-    With 64-byte RAM and 2K internal ROM

-    Support customized PID, VID by reading external EEPROM

-    Support downstream port configuration by reading external EEPROM

•      Multiple Transaction translator (MTT)

-    MTT provides respective TT control logics for each downstream port.

•     Flexible design

-    Support compound-device (non-removable in downstream ports) by I/O pin configuration (Only available in LQFP48 package)

-    Number of Downstream port can be configured by GPIO without external EEPROM (Only available in LQFP48 package)

-    Support both individual and gang modes of power management and over-current detection for downstream ports

-    Each downstream port supports two-color status indicator, with automatic and manual modes compliant to USB specification Revision 2.0

-    Automatic switching between self-powered and bus-powered modes. Conform to bus power requirements of USB 2.0 specification

-    Optional 27/48 MHz Oscillator clock input (Only available in LQFP48 package)

•     Low BOM cost

-    Built-in 5V to 3.3V regulator

-    Built-in upstream port 1.5KΩ pull-up and downstream port 15KΩ pull-down resistors

-    Embedded PLL support external 12 MHz crystal / Oscillator clock input

•    Integrate USB2.0 transceiver

-    Improve output drivers with slew-rate control for EMI reduction

-    Internal power-fail detection for ESD recovery

•      Support operating temperature: -40°C~85°C

•      Available package types:

-    48 pin LQFP,

-    28 pin QFN

•     Applications:

-    Stand-alone USB hub / USB docking

-    UMPC/MID, motherboard on-board applications

-    Consumer electronics built-in hub application

-    Monitor built-in hub

-    Embedded systems

-    Compound device to support USB hub function such as keyboard hub applications