用户在尝试上传Arduino程序时遇到问题，错误信息显示为'stk500_recv(): programmer is not responding'。尽管检查了板子型号和串口设置，问题依然存在。错误日志显示尝试多次同步失败。建议查阅Arduino故障排查指南以获取解决方案。
检查过了，板子型号设置和串口都没问题，就是上传时一直失败，程序代码也是用的示例里最基本的bling，求教大神，下面贴错误代码：
Arduino:1.6.5 (Windows 8.1), 板："Arduino/Genuino Uno"
Sketch uses 1,030 bytes (3%) of program storage space. Maximum is 32,256 bytes.
全局变量使用了9字节，(0%)的动态内存，余留2,039字节局部变量。最大为2,048字节。
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 1 of 10: not in sync: resp=0x0e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 2 of 10: not in sync: resp=0x0e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 3 of 10: not in sync: resp=0x0e
avrdude: stk500_recv(): programmer is not responding
avrdude: stk500_getsync() attempt 4 of 10: not in sync: resp=0x0e
avrdude: stk500_recv(): programmer is not respondi
最低0.47元/天 解锁文章
1万+
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
