好的，以下是一个使用华为ensp软件的示例代码，可以模拟7台交换机、36台PC和2台路由器的实际配置。
```
//创建7个交换机
for (int i = 1; i <= 7; i++) {
String switchName = "Switch_" + i;
String switchId = i + "";
String switchIp = "192.168.1." + i;
String switchMac = "00e0-fc01-000" + i;
String vlanId = i + "";
String vlanDesc = "VLAN " + i;
//创建交换机
emu.addDevice(switchName, "huawei", "CE6855-48S6Q-HI", switchId);
//配置交换机基本信息
emu.configDevice(switchName, "sysname " + switchName);
emu.configDevice(switchName, "interface vlanif " + vlanId);
emu.configDevice(switchName, "ip address " + switchIp + " 255.255.255.0");
emu.configDevice(switchName, "description " + vlanDesc);
emu.configDevice(switchName, "quit");
//配置交换机端口
for (int j = 1; j <= 24; j++) {
String portName = "Ethernet0/" + j;
String portId = "0/" + j;
emu.configDevice(switchName, "interface " + portName);
emu.configDevice(switchName, "port link-type access");
emu.configDevice(switchName, "port default vlan " + vlanId);
emu.configDevice(switchName, "shutdown");
emu.configDevice(switchName, "undo shutdown");
emu.configDevice(switchName, "quit");
}
//配置交换机MAC地址
emu.configDevice(switchName, "mac-address " + switchMac);
}
//创建36台PC
for (int i = 1; i <= 36; i++) {
String pcName = "PC_" + i;
String pcId = i + "";
String pcIp = "192.168.1." + (i + 7);
String pcMac = "00e0-fc01-100" + i;
String pcGateway = "192.168.1.1";
//创建PC
emu.addDevice(pcName, "huawei", "PC", pcId);
//配置PC基本信息
emu.configDevice(pcName, "ip address " + pcIp + " 255.255.255.0");
emu.configDevice(pcName, "mac-address " + pcMac);
emu.configDevice(pcName, "gateway " + pcGateway);
}
//创建2台路由器
for (int i = 1; i <= 2; i++) {
String routerName = "Router_" + i;
String routerId = i + "";
String routerIp = (i == 1 ? "192.168.1.254" : "10.0.0.1");
String routerMac = (i == 1 ? "00e0-fc01-000a" : "00e0-fc01-000b");
String routerSubnetMask = (i == 1 ? "255.255.255.0" : "255.0.0.0");
String routerGateway = (i == 1 ? "192.168.1.1" : "10.0.0.254");
//创建路由器
emu.addDevice(routerName, "huawei", "NE20E-S2E", routerId);
//配置路由器基本信息
emu.configDevice(routerName, "sysname " + routerName);
emu.configDevice(routerName, "interface GigabitEthernet0/0/0");
emu.configDevice(routerName, "ip address " + routerIp + " " + routerSubnetMask);
emu.configDevice(routerName, "mac-address " + routerMac);
emu.configDevice(routerName, "quit");
emu.configDevice(routerName, "interface GigabitEthernet0/0/1");
emu.configDevice(routerName, "ip address " + routerGateway + " " + routerSubnetMask);
emu.configDevice(routerName, "mac-address " + routerMac);
emu.configDevice(routerName, "quit");
emu.configDevice(routerName, "ip route-static 0.0.0.0 0.0.0.0 " + routerGateway);
}
//连接PC和交换机
for (int i = 1; i <= 36; i++) {
String pcName = "PC_" + i;
String switchName = "Switch_" + ((i % 7) + 1);
String portName = "Ethernet0/" + ((i % 24) + 1);
emu.connectDevices(pcName, "Ethernet0", switchName, portName);
}
//连接路由器和交换机
emu.connectDevices("Router_1", "GigabitEthernet0/0/0", "Switch_1", "Ethernet0/24");
emu.connectDevices("Router_2", "GigabitEthernet0/0/0", "Switch_7", "Ethernet0/24");
```
这段代码创建了7个交换机、36个PC和2个路由器，并将它们连接在一起。您可以根据需要调整IP地址、子网掩码、MAC地址和端口号等配置参数。
894
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
