折腾呀,幸好在公众号里朋友提了个醒,要在华硕AX89X里的无线专业设置里关闭这个选项“Extended NSS”。前于这个选项的意思,请看下文:
OMN channel width 160 and 80+80 MHz is now signaled through a new 160 MHz field,at 80 MHz in the existing OMN channel width field. This change is proposed because 80 MHz devices have been observed to have parsing issues with the now deprecated 80+80 and 160 MHz signaling in the VHT Operation element, and the same issue is speculated to exist in the OMN signaling. This has not been experimentally established though, but a change is proposed regardless, as a conservative approach. An independent by-product of this change is that the 1-bit 160 MHz fieldreplaces a 2-bit Dynamic Extended NSS BW field. This reduction in size was possible because 1/2 or 3/4 NSS is merely an implementation capability rather than a dynamic capability between which switching would be needed.
Anew center frequency CCFS2 is defined to signal the 160 or 80+80 MHz center frequency for NSS support at less than max NSS. CCFS2 is hidden for legacy devices that do not support extended NSS. CCFS2 is inserted into the HT Operation element, which has many reserved bits, and which is already used in the determination of the channel width and center frequency (through STA channel width an secondary channel offset).</