德标螺纹规格对照表_德标 国标,国际标准中英文对照表

101 DIN927 开槽无头轴肩螺钉 slotted shoulder screws

102 DIN928 焊接方螺母 square weld nuts GB/T13680-92

103 DIN929 焊接六角螺母 hexagon weld nuts GB/T13681-92

104 DIN931 六角头螺栓(半牙) hexagon head screws ISO4014 GB5782-86

105 DIN933 六角头螺栓(全牙) hexagon head screws ISO4017 GB5783-86

106 DIN934 六角头螺母(1型) hexagon full nuts ISO4032 GB6170-86

107 DIN934 细牙六角头螺母(1型) hexagon full nuts ISO8673 GB6171-86

108 DIN935 开槽六角螺母 hexagon slotted and castle nuts ISO7035

GB6178-86

109 DIN936 六角头薄螺母 hexagon thin nuts ISO4035 GB6172.1-86

110 DIN937 六角头开槽薄螺母 hexagon thin slotted and castle nuts ISO7038

GB6181-86

111 DIN938 双头螺距(牙长=1D) studs metal (end=1d) GB897-88

112 DIN939 双头螺距(牙长=1.25D) studs metal (end=1.25d) GB898-88

113 DIN940 双头螺距(牙长=1.5D) studs metal (end=1.5d)

114 DIN960 六角头细牙螺栓(半牙) hexagon head bolts,metric fine pitch thread

ISO8765 GB5785-86

115 DIN961 六角头细牙螺栓(全牙) hexagon head bolts,metric fine pitch thread

ISO8676 GB5786-86

116 DIN962 头部穿孔六角头螺栓 additional shapes and versions for bolts

117 DIN963 开槽沉头螺钉 slotted countersund head screws ISO 2009

GB68-85

118 DIN964 开槽半沉头螺钉 slotted raised countersunk oval head screws ISO

2010 GB69-85

119 DIN965 十字槽沉头螺钉 cross recessed countersunk head screws ISO7046

GB819-85

120 DIN966 十字槽半沉头螺钉 cross recessed raised countersunk head screws

ISO7047 GB820-85

121 DIN970 六角头螺母 hexagon nuts type-1

122 DIN971 六角头螺母 hexagon nuts type-2

123 DIN972 细牙六角头螺母(2型) hexagon nuts with fine thread ISO8674

GB6176-86

124 DIN975 牙条(全螺纹) threaded rods(studdings) GB15389-94

125 DIN976 螺纹销 threaded pins(stud bolts)

126 DIN979 六角头开槽薄螺母(2型) hexagon thin slotted and castle nuts

127 DIN980 全金属六角锁紧螺母(1型) prevailling torque type hexagon nuts,all

metall nuts ISO7199 GB6184-86

128 DIN981 圆螺母 locknuts ISO2982 GB812-88

129 DIN982 六角头尼龙锁紧螺母 prevailling torque type hexagon nuts,heavy

type ,with nylon insert ISO7040 GB889.1-86

130 DIN985 六角头薄型尼龙锁紧螺母 prevailling torque type hexagon nuts,heavy

type ,with nylon insert ISO10511 GB6172.2-86

131 DIN986 六角盖型尼龙锁紧螺母 prevailling torque typedomed capnuts with

nylon insert

132 DIN988 配合垫片 shim rings

133 DIN1052 木材连接用垫片 washers for timber connectors

134 DIN1151 沉头钢钉 round plain head nails

135 DIN1440 销钉专用垫片A型 plain washers for clevis pins(A型)

ISO8738

136 DIN1441 销钉专用垫片 plain washers for clevis pins

137 DIN1444 带头销钉 clevis pins with head ISO2341

138 DIN1471 圆锥型槽销 grooved pins,taper grooved ISO8744

GB/T13829.2

139 DIN1472 圆锥型槽销(半槽) grooved pins,taper grooved half length

ISO8745 GB/T13829.2

140 DIN1473 平行槽销(带倒角) grooved pins,parallel grooved full length

ISO8740

141 DIN1474 前端凹槽槽销 grooved pins,reserve grooved half length

ISO8741

142 DIN1475 中部凹槽槽销 grooved pins,centre grooved ISO8742

143 DIN1476 圆头槽销 grooved pins with round head ISO8746

GB/T13829.3

144 DIN1477 沉头槽销 grooved pins with countersunk head ISO8747

145 DIN1479 六角螺母棒 turnuckles(centre parts),made out of hexagon

bar

146 DIN1480 花篮螺栓 turnuckles with eye bolt and hook bolt

147 DIN1481 弹性圆柱销 spring pins,heavy type ISO8752 GB879-86

148 DIN1587 组合式盖型螺母 hexagon domed cap nuts GB802-88

149 DIN1804 开槽圆螺母(配合沟头扳手) slotted round nuts for hook spanner

150 DIN1816 圆螺母(带插销孔) round nuts with set holes

151 DIN2093 盘型弹簧垫圈 disc springs

152 DIN3017 喉箍 hose clamps

153 DIN3404 润滑油嘴(旋扭头) lubricating nipples,button head

154 DIN3567 管夹 shackles for conduilts

155 DIN3570 U型螺栓 stirrup bolts(U-bolts)

156 DIN6319 球面垫圈 spherical washers,conical seats GB849-88

157 DIN6325 圆柱销 parallel pins ISO8734

158 DIN6330 厚六角螺母 hexagon nuts ,1.5d GB56-88

159 DIN6331 厚六角法兰面螺母 hexagon nuts ,1.5d with collar GB6177-86

160 DIN6334 长六角螺母 hexagon nuts ,3d

161 DIN6797-A 外齿锁紧垫圈 external teeth lock washers GB862.1-87

162 DIN6797-I 内齿锁紧垫圈 internal teeth lock washers GB861.1-87

163 DIN6798-A 外锯齿锁紧垫圈 external teeth serrated lock washers

GB862.2-87

164 DIN6798-I 内锯齿锁紧垫圈 internal teeth serrated lock washers

GB861.2-87

165 DIN6799 开口挡圈 retaining rings for shafts(E-rings),circlips

GB896-76

166 DIN6885 平键(A型) parallel keys(form A ) ISO773/2491

167 DIN6888 半圆键 woodruff keys ISO3912

168 DIN6899 嵌环(支撑环) thimbles

169 DIN6900 机器螺钉和垫圈组合件 screws and washers assemblies

GB9074.1-.17

170 DIN6901 自攻螺钉和垫圈组合件 tapping screws and washers assemblies

GB9074.18-.23

171 DIN6912 薄型带孔内六角圆柱头螺钉 hexagon socket head cap screws with

hole,low head

172 DIN6914 大六角头螺栓 hexagon head bolts with large head(friction grip

bolts)

173 DIN6915 大六角螺母 hexagon nuts with large wideth across

flat(friction grip nuts)

174 DIN6916 大垫圈 round washers for friction grip bolts

175 DIN6917 楔型方垫圈 spuare taper washers for friction grip bolts on

T-sections

176 DIN6923 六角法兰面螺母 hexagon flange nuts ISO4161 GB6177-86

177 DIN6925 全金属六角锁紧螺母(2型) prevailing torque type hexagon nuts,all

metallic nuts ISO7042 GB6185.1-2000

178 DIN7337 开口型抽芯铆钉(沉头、扁圆头) blind rivets GB12617/12618

179 DIN7338 扁平头半空心/全空心铆钉 rivets for brake and clutch lining

GB875/975-86

180 DIN7343 螺旋夹紧销 spiral pins ISO8750

181 DIN7346 轻型弹性圆柱销 spring pins,light type ISO13337

182 DIN7349 重型弹性圆柱销用垫圈 washers for bolts with heavy type spring

pinss

183 DIN7500 ISO公制螺纹螺钉(多种头型) threadforming screws for ISO-metric

thread

184 DIN7504 自攻自钻螺钉(多种头型) self-drilling tapping screws

185 DIN7513 开槽切削螺纹螺钉(多种头型) thread cutting screws

186 DIN7516 十字槽切削螺纹螺钉(多种头型) thread cutting screws cross

recess

187 DIN7965 T型四爪螺母 tee nuts with pronge

188 DIN7968 钢结构用六角头螺栓连接副 hexagon head fitted bolts for steel

structures GB1228/1229/1230

189 DIN7971 开槽盘头自攻螺钉 pan head tapping screws with slot ISO1481

GB5282-85

190 DIN7972 开槽沉头自攻螺钉 countersunk flat head tapping screws with slot

ISO1482 GB5283-85

191 DIN7973 开槽半沉头自攻螺钉 raised countersunk oval head tapping screws

with slot ISO1483 GB5284-85

192 DIN7976 六角头自攻螺钉 hexagon tapping screws ISO1479 GB5285-85

193 DIN7980 圆柱头螺钉用弹簧垫圈 spring lock washers for screws with

cylindrical heads ISO8738

194 DIN7981 十字槽盘头自攻螺钉 pan head tapping screws with cross recessed

ISO 7049 GB845-85

195 DIN7982 十字槽沉头自攻螺钉 countersunk flat head tapping screws with

cross recessed ISO7050 GB846-85

196 DIN7983 十字槽半沉头自攻螺钉 raised countersunk oval head tapping screws

with cross recessed ISO7051 GB847-86

197 DIN7984 薄型内六角圆柱头螺钉 hexagon socket head cap screws with，reduced

head

198 DIN7985 十字槽盘头螺钉 pan head screws with cross recessed ISO7045

GB818-85

199 DIN7989 钢结构用垫圈 washers for steel structures GB1230-84

200 DIN7990 钢结构用六角头螺栓 hexagon head bolts for steel structures

GB1229-84

201 DIN7991 内六角沉头螺钉 hexagon socket countersunk head screws

ISO10642

202 DIN7993 轴用钢丝挡圈 roundwire snap rings for shafts GB895.2-86

203 DIN7995 十字槽半沉头木螺钉 cross recessed raised countersunk head wood

screws GB952-86

204 DIN7996 十字槽圆头木螺钉 cross recessed round head wood screws

GB950-86

205 DIN7997 十字槽沉头木螺钉 cross recessed countersunk head wood screws

GB951-86

206 DIN8140 螺纹护套(普通\自锁等) ciol inserts,coarse,fine thread,silf

locking

207 DIN9021 大外径垫圈 washers,outside diameter appro.3d ISO7093

GB96-85

208 DIN11024 弹簧卡子 spring cotter for a bolt

209 DIN13257 平板螺栓 belting bolts (elevator bolts)

210 DIN18182 干壁钉(墙板钉) dry wall screws

211 DIN28129 环型螺母 lifting nuts(eye nuts) GB63-88

212 DIN70952 圆螺母用止退垫圈 tab washers for slotted round nuts

GB858-88