信锐交换机配置命令_思科、锐捷交换机配置常用命令及终极大爆炸

8ccac163c64e810dd9b9e3c6d037d8f3.png

高手过招,永远赶不上VIP,VIP都是编程高手设置的。

准备命令

>Enable 进入特权模式

#Exit 返回上一级操作模式

#End 返回到特权模式

#write memory或copy running-config startup-config 保存配置文件

#del flash:config.text 删除配置文件

#erase startup-config 删除配置文件

#del flash:vlan.dat 删除Vlan配置信息

#Configure terminal 进入全局配置模式

(config)#hostname switchA 配置设备名称为switchA

(config)#banner motd & 配置每日提示信息 &为终止符

(config)#enable secret level 1 0 star 配置远程登陆密码为star

(config)#enable secret level 15 0 star 配置特权密码为star

Level 1为普通用户级别,可选为1~15,15为最高权限级别;0表示密码不加密

(config)#enable services web-server 开启交换机WEB管理功能

Services可选以下:web-server(WEB管理)、telnet-server(远程登陆)等

查看信息

#show running-config 查看当前生效的配置信息

#show interface fastethernet 0/3 查看F0/3端口信息

#show interface serial 1/2 查看S1/2端口信息

#show interface 查看所有端口信息

#show ip interface brief 以简洁方式汇总查看所有端口信息

#show ip interface 查看所有端口信息

#show version 查看版本信息

#show mac-address-table 查看交换机当前MAC地址表信息

#show running-config 查看当前生效的配置信息

#show vlan 查看所有VLAN信息

#show vlan id 10 查看某一VLAN (如VLAN10)的信息

#show interface fastethernet 0/1 switchport 查看某一端口模式(如F 0/1)

#show aggregateport 1 summary 查看聚合端口AG1的信息

#show spanning-tree 查看生成树配置信息

#show spanning-tree interface fastethernet 0/1 查看该端口的生成树状态

#show port-security 查看交换机的端口安全配置信息

#show port-security address 查看地址安全绑定配置信息

#show ip access-lists listname 查看名为listname的列表的配置信息

端口的基本配置

(config)#Interface fastethernet 0/3 进入F0/3的端口配置模式

(config)#interface range fa 0/1-2,0/5,0/7-9 进入F0/1、F0/2、F0/5、F0/7、F0/8、F0/9的端口配置模式

(config-if)#speed 10 配置端口速率为10M,可选10,100,auto

(config-if)#duplex full 配置端口为全双工模式,可选full(全双工),half(半双式),auto(自适应)

(config-if)#no shutdown 开启该端口

(config-if)#switchport access vlan 10 将该端口划入VLAN10中,用于VLAN

(config-if)#switchport mode trunk 将该端口设为trunk模式,用于Tag vlan,可选模式为access,trunk

(config-if)#port-group 1 将该端口划入聚合端口AG1中,用于聚合端口

聚合端口的创建

(config)#interface aggregateport 1 创建聚合接口AG1

(config-if)#switchport mode trunk 配置并保证AG1为trunk模式

(config)#int f0/23-24

(config-if-range)#port-group 1 将端口(端口组)划入聚合端口AG1中

生成树

(config)#spanning-tree 开启生成树协议

(config)#spanning-tree mode stp 指定生成树类型为stp,可选模式:stp、rstp、mstp

(config)#spanning-tree priority 4096 设置交换机的优先级为4096 , 优先级值小为高。优先级可选值为0,4096,8192,……,为4096的倍数。交换机默认值为32768

VLAN的基本配置

(config)#vlan 10 创建VLAN10

(config-vlan)#name vlanname 命名VLAN为vlanname

(config-if)#switchport access vlan 10 将该端口划入VLAN10中

某端口的接口配置模式下进行

(config)#interface vlan 10 进入VLAN 10的虚拟端口配置模式

(config-if)#ip address 192.168.1.1 255.255.255.0 为VLAN10的虚拟端口配置IP及掩码,二层交换机只能配置一个IP,此IP是作为管理IP使用,例如,使用Telnet的方式登录的IP地址

(config-if)#no shutdown 启用该端口

端口安全

(config)#interface fastethernet 0/1 进入一个端口

(config-if)#switchport port-security 开启该端口的安全功能

配置最大连接数限制:

(config-if)#switchport port-secruity maxmum 1 配置端口的最大连接数为1,最大连接数为128

(config-if)#switchport port-secruity violation shutdown 配置安全违例的处理方式为shutdown,可选为protect (当安全地址数满后,将未知名地址丢弃)、restrict(当违例时,发送一个Trap通知)、shutdown(当违例时将端口关闭,并发送Trap通知,可在全局模式下用errdisable recovery来恢复)

IP和MAC地址绑定:

(config-if)#switchport port-security mac-address xxxx.xxxx.xxxx ip-address 172.16.1.1 接口配置模式下配置MAC地址xxxx.xxxx.xxxx和IP172.16.1.1进行绑定(MAC地址注意用小写)

三层路由功能(针对三层交换机)

(config)#ip routing 开启三层交换机的路由功能

(config)#interface fastethernet 0/1

(config-if)#no switchport 开启端口的三层路由功能(这样就可以为某一端口配置IP)

(config-if)#ip address 192.168.1.1 255.255.255.0

(config-if)#no shutdown

三层交换机路由协议

(config)#ip route 172.16.1.0 255.255.255.0 172.16.2.1 配置静态路由

注:172.16.1.0 255.255.255.0为目标网络的网络号及子网掩码

172.16.2.1为下一跳的地址,也可用接口表示,如ip route 172.16.1.0 255.255.255.0 serial 1/2(172.16.2.0所接的端口)

(config)#router rip 开启RIP协议进程

(config-router)#network 172.16.1.0 申明本设备的直连网段信息

(config-router)#version 2 开启RIP V2,可选为version 1(RIPV1)、version 2(RIPV2)

(config-router)#no auto-summary 关闭路由信息的自动汇总功能(只有在RIPV2支持)

(config)#router ospf 开启OSPF路由协议进程(针对不同系列,可能需要加OSPF进程ID)

(config-router)#network 192.168.1.0 0.0.0.255 area 0 申明直连网段信息,并分配区域号(area0为骨干区域)

IP ACL

交换机采用命名的访问控制列表;分标准(stand)和扩展(extended)两种

标准ACL:

(config)#ip access-list stand listname 定义命名标准列表,命名为listname,stand为标准列表

(config-std-nacl)#deny 192.168.30.0 0.0.0.255 拒绝来自192.168.30.0网段的IP流量通过

注:deny:拒绝通过;可选:deny(拒绝通过)、permit(允许通过)

192.168.30.0 0.0.0.255:源地址及源地址通配符;可使用any表示任何IP

(config-std-nacl)#permit any

(config-std-nacl)#end 返回

扩展ACL:

(config)#ip access-list extended listname 定义命名扩展列表,命名为listname,extended为扩展

(config-ext-nacl)#deny tcp 192.168.30.0 0.0.0.255 192.168.10.0 0.0.0.255 eq www 拒绝源地址为192.168.30.0网段的IP访问目的地址为192.168.10.0网段的www服务

注:deny:拒绝通过,可选:deny(拒绝通过)、permit(允许通过)

tcp:协议名称,协议可以是udp、ip、eigrp、gre、icmp、igmp、igrp等等。

192.168.10.0 0.0.0.255:源地址及源地址通配符

192.168.30.0 0.0.0.255:目的地址及目的地址通配符

eq:操作符(lt-小于,eq-等于,gt-大于,neg-不等于,range-包含)

www:端口号,可使用名称或具体编号

(config-ext-nacl)#permit ip any any 允许其它通过

(config-ext-nacl)#end 返回

(config)#interface vlan 10 进入端口配置模式

(config-if)#ip access-group listname in 访问控制列表在端口下in方向应用;可选:in(入栈)、out(出栈)

(config-if)#end 返回

注:配置ACL时,若只想对其中部分IP进行限制访问时,必须配置允许其流量通过,否则设备只会对限制IP进行处理,不会对非限制IP进行允许通过处理。

友情提示:实在坚持不住的请直接翻到末尾,没什么见不得人的

配置命令示例

交换机密码

(config)#enable secret level 1 0 100

(config)#enable secret level 15 0 100

远程登入密码

(config)#line vty 0 4

(config-line)#password 100

(config-line)#end

交换机管理IP

(config)#interface vlan 1

(config-if)#ip address 192.168.1.10 255.255.255.0

(config-if)#no shutdown

修改交换机老化时间

(config)#mac-address-table aging-time 20

(config)#end

添删vlan

(config)#vlan 888

(config-vlan)#name a888

(config)#no vlan 888

添加access口

(config)#interface gigabitEthernet 0/10

(config-if)#switchport mode access

(config-if)#switchport access vlan 10

切换assess trunk

(config-if)#switchport mode access

(config-if)#switchport mode trunk

指定特定一个native vlan

(config-if)#switchport trunk native vlan 10

配置trunk口的许可vlan列表

(config-if)#switchport trunk allowed vlan ?

add Add VLANs to the current list

all All VLANs

except All VLANs except the following

remove Remove VLANs from the current list

速成树协议

(config)#spanning-tree

(config)#spanning-tree mode rstp/stp

配置网关

(config)#ip default-gateway 192.168.1.254

查看CPU利用率

show cpu

查看交换机时钟

show clock

查看交换机日志

show logging

查看交换机动态学习到的MAC地址表

show mac-address-table dynamic

查看当前交换机运行的配置文件

show running-config

查看交换机硬件、软件信息

show version

查看交换机的arp表

show arp

显示接口详细信息的命令

show interfaces gigabitEthernet 4/1 counters

接口配置

Switch(config)#interface gigabitethernet 0/1

把接口工作模式改为光口

Switch(config-if)#medium-type fiber

把接口工作模式改为电口

Switch(config-if)#medium-type copper

速度/双工配置

进入接口配置模式

Switch(config)#interface interface-id

设置接口的速率参数,或者设置为auto

Switch(config-if)#speed {10 | 100 | 1000 | auto }

设置接口的双工模式

Switch(config-if)#duplex {auto | full | half}

例子

Switch(config)#interface gigabitethernet 0/1

Switch(config-if)#speed 1000

Switch(config-if)#duplex full

光口不能修改速度和双工配置,只能auto

在故障处理的时候,如果遇到规律性的时断时续或掉包,在排除其他原因后,可以考虑是否和对端设备的速率和双工模式不匹配,尤其是两端设备为不同厂商的时候

VLAN

建立VLAN 100

Switch(config)#vlan 100

该VLAN名称为ruijie

Switch(config)#name ruijie

将交换机接口划入VLAN 中

range表示选取了系列端口1-48,这个对多个端口进行相同配置时非常有用

Switch(config)#interface range f 0/1-48

将接口划到VLAN 100中

Switch(config-if-range)#switchport access vlan 100

将接口划回到默认VLAN 1中,即端口初始配置

Switch(config-if-range)#no switchport access vlan

Switch(config)#interface fastEthernet 0/1

该端口工作在access模式下

Switch(config-if)#switchport mode access

该端口工作在trunk模式下

Switch(config-if)#switchport mode trunk

Switch(config)#interface fastEthernet 0/2

设定VLAN要修剪的VLAN

Switch(config-if)#switchport trunk allowed vlan remove 2-9,11-19,21-4094

取消端口下的VLAN修剪

Switch(config-if)#no switchport trunk allowed vlan

生成树

开启生成树协议

Switch(config)#spanning-tree

禁止生成树协议

Switch(config)#no spanning-tree

配置生成树优先级

配置设备优先级为4096

Switch(config)#spanning-tree priority 4096

数值越低,优先级别越高

端口镜像

配置G0/2为镜像端口

Switch(config)#monitor session 1 destination interface G 0/2

配置G0/1为被镜像端口,且出入双向数据均被镜像

Switch(config)#monitor session 1 source interface G 0/1 both

去掉镜像1

Switch(config)#no monitor session 1

端口聚合

Switch(config)#interface fastEthernet 0/1

把端口f0/1加入到聚合组1中

Switch(config-if)#port-group 1

把端口f0/1从聚合组1中去掉

Switch(config-if)#no port-group 1

ACL

建立ACL访问控制列表名为ruijie,exten表示建立的是扩展访问控制列表

Switch(config)#Ip access-list exten ruijie

禁止PING IP地址为192.168.1.1的设备

Switch(config-ext-nacl)#deny icmp any 192.168.1.1 255.255.255.0

禁止端口号为135的应用

Switch(config-ext-nacl)#deny tcp any any eq 135

禁止协议为www的应用

Switch(config-ext-nacl)#deny udp any any eq www

允许所有行为

Switch(config-ext-nacl)#permit ip any any

将ACL应用到具体的接口上

Switch(config)#interface range f 0/1

把名为ruijie的ACL应用到端口f 0/1上

Switch(config-if)#ip access-group ruijie in

从接口去除ACL

Switch (config-if)#no ip access-group ruijie in

删除名为ruijie的ACL

Switch(config)#no Ip access-list exten ruijie

增加ACE项后,是增加到ACL最后,不可以中间插入,如果要调整ACE的顺序,必须整个删除ACL后再重新配置

端口安全

Switch(config)#interface range f 0/1

开启端口安全

Switch(config-if)#switchport port-security

关闭端口安全

Switch(config-if)#no switchport port-security

设置端口能包含的最大安全地址数为8

Switch(config-if)#switchport port-security maximum 8

在接口fastethernet0/1配置一个安全地址00d0.f800.073c,并为其绑定一个IP地址192.168.1.1

Switch(config-if)#switchport port-security mac-address 00d0.f800.073c ip-address 192.168.1.1

删除接口上配置的安全地址

Switch(config-if)#no switchport port-security mac-address 00d0.f800.073c ip-address 192.168.1.1

防ARP攻击

IP和MAC地址的绑定

Switch(config)#arp ip-address hardware-address [type] interface-id

Switch(config)#arp 192.168.12.111 00d0.f800.073c arpa g 0/1

绑定网关

进入指定端口进行配置

Switch(config)#Interface interface-id

配置防止ip-address的ARP欺骗

Switch(config-if)#Anti-ARP-Spoofing ip ip-address

防STP攻击

进入端口Fa0/1

Switch(config)#inter fastEthernet 0/1

打开该端口的的BPDU guard功能

Switch(config-if)#spanning-tree bpduguard enable

关闭该端口的的BPDU guard功能

Switch(config-if)#spanning-tree bpduguard diaable

端口关闭后只能shutdown然后再no shutdown或者重新启动交换机才能恢复

防DOS/DDOS攻击

进入端口Fa0/1

Switch(config)#inter fastEthernet 0/1

预防伪造源IP的DOS攻击的入口过滤功能

Switch(config-if)#ip deny spoofing-source

关闭入口过滤功能只能在三层接口上配置

Switch(config-if)#no ip deny spoofing-source

和ACL不能同时存在

端口关闭后只能shutdown然后再no shutdown或者重新启动交换机才能恢复

防IP扫描攻击

打开系统保护

Switch(config)#system-guard enable

关闭系统保护功能

Switch(config)#no system-guard

DHCP

打开DHCP Relay Agent

Switch(config)#service dhcp

配置DHCP Server的IP地址

Switch(config)#ip helper-address address

VRRP

Switch(config)#Interface interface-id

Switch(config-if)#Standby [group-number] ip ip-address

设置虚拟机的优先级

standby [group-number] priority priority

三层交换机配置

SVI:

把VLAN 10配置成SVI

switch(config)#interface vlan 10

给该SVI接口配置一个IP地址

switch(config-if)#ip address 192.168.1.1 255.255.255.0

Routed Port:

switch(config)#interface fa 0/1

把f 0/1变成路由口

switch(config-if)#no switch

路由配置

添加一条路由

switch(config)#ip route 目的地址 掩码 下一跳

switch(config)#ip route 210.10.10.0 255.255.255.0 218.8.8.8

冗余链路

在骨干网设备连接中,单一链路的连接很容易实现,但一个简单的故障就会造成网络的中断。因此在实际网络组建的过程中,为了保持网络的稳定性,在多台交换机组成的网络环境中,通常都使用一些备份连接,以提高网络的健壮性、稳定性。

这里的备份连接也称为备份链路或者冗余链路。备份链路之间的交换机经常互相连接,形成一个环路,通过环路可以在一定程度上实现冗余。

链路的冗余备份能为网络带来健壮性、稳定性和可靠性等好处,但是备份链路也会使网络存在环路,环路问题是备份链路所面临的最为严重的问题,交换机之间的环路将导致网络新问题的发生:广播风暴、多帧复制、地址表的不稳定。

解决方法:生成树协议避免环路

每个LAN都会选择一台设备为指定交换机,通过该设备的端口连接到根,该端口为指定端口(Designated port)

将交换网络中所有设备的根端口(RP)和指定端口(DP)设为转发状态(Forwarding),将其他端口设为阻塞状态(Blocking)

生成树经过一段时间(默认值是50秒左右)稳定之后,所有端口要么进入转发状态,要么进入阻塞状态

IEEE 802.1w快速生成树协议概述

快速生成树协议RSTP(Rapid Spannning Tree Protocol) IEEE 802.1w在STP协议基础上做了改进,使得收敛速度快得多(最快1秒以内)

生成树协议的配置

开启生成树协议

Switch(config)#Spanning-tree

关闭生成树协议

Switch(config)#no Spanning-tree

配置生成树协议的类型

Switch(config)#Spanning-tree mode stp/rstp

配置交换机优先级

Switch(config)#spanning-tree priority <0-61440>

(“0”或“4096”的倍数、共16个、缺省32768)

恢复到缺省值

Switch(config)#no spanning-tree priority

配置交换机端口的优先级

Switch(config)#interface interface-type interface-number

Switch(config-if)#spanning-tree port-priority number

显示生成树状态

Switch#show spanning-tree

显示端口生成树协议的状态

Switch#show spanning-tree interface fastethernet <0-2/1-24>

生成树协议(spanning-tree protocol)由IEEE 802.1d标准定义。生成树协议的作用是为了提供冗余链路,解决网络环路问题。生成树协议通过SPA(生成树算法)生成一个没有环路的网络,当主要链路出现故障时,能够自动切换到备份链路,保证网络的正常通信。

*以上内容源自CSDN小宇飞刀《锐捷交换机常用命令速查》

我搬迁我快乐

上面这些命令,除了搬迁至CSDN,还是要了锐捷官微的排版模式,其主要中心思想是想留着以后自己有一天需要去学习。

另外发一下感慨,佩服那些使用命令查找东西的高手,我底子薄,全靠TAB加?号。

3d031d60257285067903fdc5d5b1d121.png
  • 5
    点赞
  • 45
    收藏
    觉得还不错? 一键收藏
  • 0
    评论

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值