树莓派dht11 python_（四）树莓派进阶：DHT11与Raspberry Pi连接

#!/usr/bin/python

# Copyright (c) 2014 Adafruit Industries

# Author: Tony DiCola

# Permission is hereby granted, free of charge, to any person obtaining a copy

# of this software and associated documentation files (the "Software"), to deal

# in the Software without restriction, including without limitation the rights

# to use, copy, modify, merge, publish, distribute, sublicense, and/or sell

# copies of the Software, and to permit persons to whom the Software is

# furnished to do so, subject to the following conditions:

# The above copyright notice and this permission notice shall be included in all

# copies or substantial portions of the Software.

# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,

# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE

# AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER

# LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,

# OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE

# SOFTWARE.

import Adafruit_DHT

# Sensor should be set to Adafruit_DHT.DHT11,

# Adafruit_DHT.DHT22, or Adafruit_DHT.AM2302.

sensor = Adafruit_DHT.DHT11

# Example using a Beaglebone Black with DHT sensor

# connected to pin P8_11.

#pin = 'P8_11'

# Example using a Raspberry Pi with DHT sensor

# connected to GPIO4.

pin = 4

# Try to grab a sensor reading. Use the read_retry method which will retry up

# to 15 times to get a sensor reading (waiting 2 seconds between each retry).

while True:

humidity, temperature = Adafruit_DHT.read_retry(sensor, pin)

print('Temp={0:0.1f}*C Humidity={1:0.1f}%'.format(temperature, humidity))

'''

# Note that sometimes you won't get a reading and

# the results will be null (because Linux can't

# guarantee the timing of calls to read the sensor).

# If this happens try again!

if humidity is not None and temperature is not None:

print('Temp={0:0.1f}*C Humidity={1:0.1f}%'.format(temperature, humidity))

else:

print('Failed to get reading. Try again!')