linux环境里nic0无效,linux – 为什么ethtool没有向我显示NIC的所有属性？

CentOS 5.8 | VMWare ESX 5.1

当我运行ethtool eth0时,我看到以下内容：

[root@foo ~]# ethtool eth0

Settings for eth0:

Current message level: 0x00000007 (7)

Link detected: yes

有没有办法得到其余的细节？特别是速度和双工？我习惯于ethtool输出更冗长.例如：

# ethtool eth0

Settings for eth0:

Supported ports: [ TP ]

Supported link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Full

Supports auto-negotiation: Yes

Advertised link modes: 10baseT/Half 10baseT/Full

100baseT/Half 100baseT/Full

1000baseT/Full

Advertised auto-negotiation: Yes

Speed: 100Mb/s

Duplex: Full

Port: Twisted Pair

PHYAD: 1

Transceiver: internal

Auto-negotiation: on

Supports Wake-on: d

Wake-on: d

Link detected: yes

我想知道这是否与在VMWare平台上运行有关？ ESX中的当前适配器类型为“灵活”,并且服务器上未安装VMWare工具.