日常运维中,经常要对各类日志进行管理,清理,监控,尤其是因为应用bug,在1小时内就能写几十个G日志,导致磁盘爆满,系统挂掉。
nohup.out,access.log,catalina.out
本文简单介绍利用Linux自带的logrotate来对操作系统中各类日志进行管理。
1、logrotate简介
The logrotate utility is designed to simplify the administration of log files on a system which generates a lot of log files. Logrotate allows for the automatic rotation compression, removal and mailing of log files. Logrotate can be set to handle a log file daily, weekly, monthly or when the log file gets to a certain size.
为了使用它,主要有两个地方需要修改一下:一个是/etc/logrotate.conf,另一个是/etc/logrotate.d/下面的文件。
你既可以在logrotate.conf中直接定义如何处理你的log文件,也可以在/logrotate.d/下面针对自己的log新建一个对应的文件来定义处理log的行为,推荐在目录 /logrotate.d/ 下面创建自己的文件来对个性化的日志进行处理。
logrotate定义了如何处理日志,而它本身则是被crond定时调用的。
我使用的一个生产实例:
/usr/local/nginx/logs/*.log {
create 0644 root root
daily
rotate 2
missingok
copytruncate
ifempty
compress
noolddir
}
上述内容保存到nginxlog文件,存放到目录:/etc/logrotate.d/nginxlog
设置权限:owner=root group=root mode=0644
测试配置是否正确:
lograte -d /etc/logrotate.d/nginxlog
2、logrotate配置参数
logrotate 全局配置文件: /etc/logrotate.conf
配置参数
功能说明
compress
通过gzip 压缩转储以后的日志
nocompress
不需要压缩时,用这个参数
copytruncate
用于还在打开中的日志文件,把当前日志备份并截断;是先拷贝再清空的方式,拷贝和清空之间有一个时间差,可能会丢失部分日志数据。
nocopytruncate
备份日志文件但是不截断
create mode owner group
转储文件,使用指定的文件模式创建新的日志文件。轮转时指定创建新文件的属性,如create 0777 nobody nobody
nocreate
不建立新的日志文件
delaycompress
和 compress 一起使用时,转储的日志文件到下一次转储时才压缩
nodelaycompress
覆盖 delaycompress 选项,转储同时压缩
errors address
专储时的错误信息发送到指定的Email 地址
ifempty
即使是空文件也转储,这个是 logrotate 的缺省选项。
notifempty
如果是空文件的话,不转储
mail address
把转储的日志文件发送到指定的E-mail 地址
nomail
转储时不发送日志文件
olddir directory
转储后的日志文件放入指定的目录,必须和当前日志文件在同一个文件系统
noolddir
转储后的日志文件和当前日志文件放在同一个目录下
prerotate/endscript
在logrotate转储之前需要执行的指令,例如修改文件的属性等动作;这两个关键字必须单独成行;
postrotate/endscript
在logrotate转储之后需要执行的指令,例如重新启动 (kill -HUP) 某个服务!必须独立成行;
daily
指定转储周期为每天
weekly
指定转储周期为每周
monthly
指定转储周期为每月
rotate count
指定日志文件删除之前转储的个数,0 指没有备份,5 指保留5个备份
tabootext [+] list 让logrotate
不转储指定扩展名的文件,缺省的扩展名是:.rpm-orig, .rpmsave, v, 和 ~
size
size当日志文件到达指定的大小时才转储,Size 可以指定 bytes (缺省)以及KB (sizek)或者MB (sizem).
missingok
如果日志丢失,不报错继续滚动下一个日志
notifempty
当日志文件为空时,不进行轮转
sharedscripts
运行postrotate脚本,作用是在所有日志都轮转后统一执行一次脚本。如果没有配置这个,那么每个日志轮转后都会执行一次脚本
dateext
使用当期日期作为命名格式
dateformat .%s
配合dateext使用,紧跟在下一行出现,定义文件切割后的文件名,必须配合dateext使用,只支持 %Y %m %d %s 这四个参数
size(或minsize) log-size
当日志文件到达指定的大小时才转储,log-size能指定bytes(缺省)及KB (sizek)或MB(sizem).
说明:
当日志文件 >= log-size 的时候就转储。
以下为合法格式:(其他格式的单位大小写没有试过)
size = 5 或 size 5 (>= 5 个字节就转储)
size = 100k 或 size 100k
size = 100M 或 size 100M
实例:
/home/deploy/apps/production.log {
missingok
copytruncate
rotate10notifempty
sharedscripts
dateext
dateformat-%Y-%m-%d-%s
size=10M
postrotatemv /home/deploy/apps/production.log-* /data1/log/railsgzip /data1/log/rails/production.log-*endscript
}
问题:rotate和maxage的区别是什么?
它们都是用来控制保存多少日志文件的,区别在于 rotate 是以个数为单位的,而 maxage 是以天数为单位的。如果我们是以按天来轮转日志,那么二者的差别就不大了。
4、nginx日志切割实例
vim /etc/logrotate.d/nginx #创建nginx日志切割配置文件/application/nginx/logs/*.log{
daily
rotate 10
create
dateext
}
logrotate -d /etc/logrotate.d/nginx 调试测试 -d debug
logrotate -d /etc/logrotate.d/nginx 手动切割日志测试
ls /application/nginx/logs/ 带日期的表示是切割好的日志
access.log bbs.log-20180228 error.log www.log
access.log-20180228 blog.log error.log-20180228 www.log-20180228
bbs.log blog.log-20180228 nginx.pid
配置好nginx切割日志生效时间
# cat /etc/anacrontab #此文件里有生效时间
#/etc/anacrontab: configuration file foranacron
# See anacron(8) and anacrontab(5) fordetails.
SHELL=/bin/shPATH=/sbin:/bin:/usr/sbin:/usr/bin
MAILTO=root
# the maximal random delay added to the base delay of the jobs
RANDOM_DELAY=45# the jobs will be started during the following hours only
START_HOURS_RANGE=3-22#生效时间范围是3点到22点
#periodin days delay in minutes job-identifier command1 5 cron.daily nice run-parts /etc/cron.daily7 25 cron.weekly nice run-parts /etc/cron.weekly
@monthly45 cron.monthly nice run-parts /etc/cron.monthly
也就是说,配好的nginx切割日志,生效时间是在凌晨3点到22点之间,而且随机延迟时间是45分钟
5、其他配置示例
/var/log/htmlaccess.log {
errors jim
notifempty
nocompress
weekly
prerotate/usr/bin/chattr -a /var/log/htmlaccess.log
endscript
postrotate/usr/bin/chattr +a /var/log/htmlaccess.log
endscript
}
持续集成系统日志处理配置
/var/log/jenkins/jenkins.log /var/log/jenkins/access_log {
compress
dateext
maxage365#保留最大365天
rotate99#最大保留99个备份
size=+4096k
notifempty
missingok
create644copytruncate
}
自定义日志处理
/medialog/*.log {
create 0644 root root
daily
rotate 30
missingok
copytruncate
notifempty
compress
delaycompress
olddir /medialog/backlog # 将归档日志单独目录存储
}