摘要:SuSE11sp3 64位操作系统、 MySQL5.6.40rpm安装包
注:kingtry是我的主机名
一、环境准备
操作系统:SuSE版本11sp3,64位kingtry:~ # uname -a
Linux kingtry 3.0.76-0.11-default #1 SMP Fri Jun 14 08:21:43 UTC 2013 (ccab990) x86_64 x86_64 x86_64 GNU/Linux
kingtry:~ # cat /etc/SuSE-release
SUSE Linux Enterprise Server 11 (x86_64)
VERSION = 11
PATCHLEVEL = 3
二、检测是否安装过MySQLkingtry:~ # rpm -qa | grep -i mysql
libmysqlclient_r15-5.0.96-0.6.1
libqt4-sql-mysql-4.6.3-5.25.4
MySQL-client-community-5.1.73-1.sles11
MySQL-server-community-5.1.73-1.sles11
注意输出的MySQL-*,表示已经安装过。lib开头的可以忽略。
输入以下命令删除:kingtry:~ #rpm -e MySQL-client-community-5.1.73-1.sles11
kingtry:~ #rpm -e MySQL-server-community-5.1.73-1.sles11
三、软件准备MySQL-server-5.6.40-1.sles11.x86_64.rpm
MySQL-client-5.6.40-1.sles11.x86_64.rpm
四、安装过程kingtry:~ # rpm -ivh MySQL-*
warning: MySQL-client-5.6.40-1.sles11.x86_64.rpm: Header V3 DSA signature: NOKEY, key ID 5072e1f5
Preparing... ########################################### [100%]
1:MySQL-server ########################################### [ 50%]
warning: user mysql does not exist - using root
warning: group mysql does not exist - using root
warning: user mysql does not exist - using root
warning: group mysql does not exist - using root
insserv: Service network is missed in the runlevels 4 to use service mysql
mysql 0:off 1:off 2:on 3:on 4:on 5:on 6:off
[......此处省略若干行......]
A random root password has been set. You will find it in '/root/.mysql_secret'.
2:MySQL-client ########################################### [100%]
kingtry:~ #
注意:上面输出内容中有个文件 /root/.mysql_secret,含有mysql的root用户的默认密码
如果想查询rpm包详细的安装文件列表及每个文件的实际存储路径,可通过命令rpm -ql来查询,如:kingtry:~ # rpm -ql MySQL-server-5.6.40-1.sles11
/etc/init.d/mysql
/etc/logrotate.d/mysql
/etc/my.cnf
/etc/my.cnf.d
/usr/bin/innochecksum
/usr/bin/my_print_defaults
/usr/bin/myisam_ftdump
/usr/bin/myisamchk
/usr/bin/myisamlog
/usr/bin/myisampack
/usr/bin/mysql_convert_table_format
/usr/bin/mysql_fix_extensions
/usr/bin/mysql_install_db
/usr/bin/mysql_plugin
/usr/bin/mysql_secure_installation
......
五、安装后配置之迁移数据库目录
rpm这种安装方式默认将数据文件安装到/var/lib/mysql这个目录下面,通常都需要迁移到其他目录下,如迁移到/data目录下kingtry:~ # mkdir -p /data/mysql/{data,tmp}
kingtry:~ # mv /var/lib/mysql/* /data/mysql/data
kingtry:~ # touch /data/mysql/mysql.err #此文件需要手工创建,当前版本问题
kingtry:~ # chown -R mysql /data/mysql
1,复制my.cnf模板文件
模板文件在/usr/share/mysql/my-default.cnf目录下,kingtry:~ # cp /usr/share/mysql/my-default.cnf /etc/my.cnf
修改相关参数,主要是socket, datadir, 如下:
# For advice on how to change settings please see
# http://dev.mysql.com/doc/refman/5.6/en/server-configuration-defaults.html
[client]
#password = your_password
port = 3306
socket = /data/mysql/mysql.sock
default-character-set=utf8
# Here follows entries for some specific programs
# The MySQL server
[mysqld]
port = 3306
datadir = /data/mysql/data
tmpdir = /data/mysql/tmp
socket = /data/mysql/mysql.sock
character-set-server = utf8
collation-server = utf8_general_ci
pid-file = /data/mysql/mysql.pid
user = mysql
explicit_defaults_for_timestamp
lower_case_table_names = 1
max_connections = 1000
back_log = 1024
open_files_limit = 10240
table_open_cache = 5120
#bind-address = 127.0.0.1
#skip-name-resolve
skip-external-locking
local-infile = 1
key_buffer_size = 32M
max_allowed_packet = 1M
table_open_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
#skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin = /data/mysql/mysql-bin
# binary logging format - mixed recommended
binlog_format = mixed
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=, MASTER_PORT=,
# MASTER_USER=, MASTER_PASSWORD= ;
#
# where you replace , , by quoted strings and
# by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host =
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user =
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password =
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port =
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql
innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
innodb_buffer_pool_size = 256M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
innodb_buffer_pool_instances = 2
innodb_read_io_threads = 8
innodb_write_io_threads = 8
innodb_purge_threads = 1
slow_query_log = 1
long_query_time = 10
log-queries-not-using-indexes
log-error = /data/mysql/mysql.err
expire-logs-days = 10
[mysqldump]
quick
max_allowed_packet = 512M
net_buffer_length = 16384
[mysql]
auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
[myisamchk]
key_buffer_size = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
[mysqlhotcopy]
interactive-timeout
六、启动mysql服务即可kingtry:~ # service mysql start done
Starting MySQL. done
kingtry:~ #
检查MySQL服务是否已经启动:kingtry:~ # netstat -nat | grep 3306
七、安装后配置之root密码修改
root初始密码自动生成,默认存放在/root/.mysql_secret中。修改root密码的方式有以下两种,随便哪个都行:
1、命令方式kingtry:~ # mysqladmin -u root -p password 'root123'
Enter password:
2、修改库表数据方式
先登陆mysql服务器mysql> use mysql
mysql> update user set password=password('root123') where user='root';
mysql> commit;
八、防火墙允许3306端口kingtry:~ # vi /etc/sysconfig/SuSEfirewall2
在FW_SERVICES_EXT_TCP增加3306端口,如果存在其他端口,则空格隔开,如:
FW_SERVICES_EXT_TCP="21 22 3306"
重启防火墙:# rcSuSEfirewall2 restart
九、设置远程访问
先登陆mysql服务器,授权root用户可以远程登陆mysql> grant all PRIVILEGES on *.* to root@'%' identified by 'root123';
Query OK, 0 rows affected (0.00 sec)
mysql> flush privileges;
Query OK, 0 rows affected (0.00 sec)
mysql>
注:生产环境最好只允许root在特定IP的机器上才能远程访问。
关于RPM安装方式说明:
显面易见的是简单;
但缺点也比较突出:不灵活,通过RPM管理的单个系统中只能安装一套MySQL