小米路由器mini刷lede_小米路由器刷Xiaomi Mi WiFi Mini openwrt

Current Stable Release - OpenWrt 18.06.1，released on August, 18th 2018.

there is alsoPandoraBoxfirmware for Xiaomi Mini router.

步骤：

1，保证有外网

2，电脑连上lan口

The next few steps involve first loading the development version of the firmware, then loading a firmware version which provides SSH access with the last step being loading the OpenWRT firmware onto the router

小米路由器MINI(R1CM) can see this in web, MiWiFi 稳定版 2.22.9

开启小米路由器的SSH功能之后用户可以获得root权限

小结：

u盘先格式成fat32，里面不要放任何文件

下载开发固件升级miwifi.bin ，因为稳定版不能刷ssh固件断开小米路由器的电源，将U盘插入USB接口；

按住reset按钮之后重新接入电源，指示灯变为黄色闪烁状态即可松开reset键；

等待3-5秒后安装完成之后，小米路由器会自动重启

U盘记得及时拔出来

2，再格式化下u盘，用app连上刷了开发固件的路由器，http://d.miwifi.com/rom/ssh(或者通过http://www1.miwifi.com/miwifi_open.html的开启ssh工具)下载ssh固件miwifi_ssh.bin

断开小米路由器的电源，将U盘插入USB接口；

按住reset按钮之后重新接入电源，指示灯变为黄色闪烁状态即可松开reset键；

等待3-5秒后安装完成之后，小米路由器会自动重启

wait a while

U盘记得及时拔出来

BusyBox v1.19.4 (2018-06-21 09:07:05 UTC) built-in shell (ash)

Enter 'help' for a list of built-in commands.

-----------------------------------------------------

Welcome to XiaoQiang!

-----------------------------------------------------

$$$$$$\ $$$$$$$\ $$$$$$$$\ $$\ $$\ $$$$$$\ $$\ $$\

$$ __$$\ $$ __$$\ $$ _____| $$ | $$ | $$ __$$\ $$ | $$ |

$$ / $$ |$$ | $$ |$$ | $$ | $$ | $$ / $$ |$$ |$$ /

$$$$$$$$ |$$$$$$$ |$$$$$\ $$ | $$ | $$ | $$ |$$$$$ /

$$ __$$ |$$ __$$< $$ __| $$ | $$ | $$ | $$ |$$ $$<

$$ | $$ |$$ | $$ |$$ | $$ | $$ | $$ | $$ |$$ |\$$\

$$ | $$ |$$ | $$ |$$$$$$$$\ $$$$$$$$$ | $$$$$$ |$$ | \$$\

\__| \__|\__| \__|\________| \_________/ \______/ \__| \__|

are u ok

uname -a

Linux XiaoQiang 2.6.36 #1 MiWiFi-R1CM-2.21.109 Thu Jun 21 09:31:24 UTC 2018 mips GNU/Linux

最后刷openwrtGet the latest firmware, eg:# cd /tmp; wget

Check the MTD layout:# cat /proc/mtd

If you find a line “OS1” go ahead with flashing:# mtd -r write OS1

mtd -r write /tmp/openwrt-18.06.1-ramips-mt7620-miwifi-mini-squashfs-sysupgrade.bin OS1

Unlocking OS1 ...

Writing from /tmp/openwrt-18.06.1-ramips-mt7620-miwifi-mini-squashfs-sysupgrade.bin to OS1 ...

Rebooting ...

After flashing is complete, the router willreboot. When finished you can login using telnet or web-interface on a LAN-connected client to host 192.168.1.1. User: root,no password.

SSH will be enabled after you set a password (usingpasswdor LuCI web interface), telnet will be disabled.

Please note that the OpenWrt binarydefaults to the red colorof the led instead of the orange/blue during and after finishing the boot.

如果ping 不通192.168.1.1等路由器一直红灯时再重启下即可