6.4.3. How to Repair Tables
The discussion in this section describes how to use myisamchk on MyISAM tables (extensions .MYI and .MYD).
You can also (and should, if possible) use the CHECK TABLE and REPAIR TABLE statements to check and repairMyISAM tables. See Section 12.5.2.3, “CHECK TABLE Syntax”, and Section 12.5.2.6, “REPAIR TABLE Syntax”.
Symptoms of corrupted tables include queries that abort unexpectedly and observable errors such as these:
tbl_name.frm is locked against change
Can't find file tbl_name.MYI (Errcode: nnn)
Unexpected end of file
Record file is crashed
Got error nnn from table handler
To get more information about the error, run perror nnn, where nnn is the error number. The following example shows how to use perror to find the meanings for the most common error numbers that indicate a problem with a table:
shell>
MySQL error code 126 = Index file is crashed
MySQL error code 127 = Record-file is crashed
MySQL error code 132 = Old database file
MySQL error code 134 = Record was already deleted (or record file crashed)
MySQL error code 135 = No more room in record file
MySQL error code 136 = No more room in index file
MySQL error code 141 = Duplicate unique key or constraint on write or update
MySQL error code 144 = Table is crashed and last repair failed
MySQL error code 145 = Table was marked as crashed and should be repaired
perror 126 127 132 134 135 136 141 144 145
Note that error 135 (no more room in record file) and error 136 (no more room in index file) are not errors that can be fixed by a simple repair. In this case, you must use ALTER TABLE to increase the MAX_ROWS andAVG_ROW_LENGTH table option values:
ALTER TABLE MAX_ROWS= AVG_ROW_LENGTH=;
tbl_namexxxyyy
If you do not know the current table option values, use SHOW CREATE TABLE.
For the other errors, you must repair your tables. myisamchk can usually detect and fix most problems that occur.
The repair process involves up to four stages, described here. Before you begin, you should change location to the database directory and check the permissions of the table files. On Unix, make sure that they are readable by the user that mysqld runs as (and to you, because you need to access the files you are checking). If it turns out you need to modify files, they must also be writable by you.
This section is for the cases where a table check fails (such as those described in Section 6.4.2, “How to CheckMyISAM Tables for Errors”), or you want to use the extended features that myisamchk provides.
The options that you can use for table maintenance with myisamchk are described in Section 4.6.3, “myisamchk— MyISAM Table-Maintenance Utility”.
If you are going to repair a table from the command line, you must first stop the mysqld server. Note that when you do mysqladmin shutdown on a remote server, the mysqld server is still alive for a while after mysqladminreturns, until all statement-processing has stopped and all index changes have been flushed to disk.
Stage 1: Checking your tables
Run myisamchk *.MYI or myisamchk -e *.MYI if you have more time. Use the -s (silent) option to suppress unnecessary information.
If the mysqld server is stopped, you should use the --update-state option to tell myisamchk to mark the table as “checked.”
You have to repair only those tables for which myisamchk announces an error. For such tables, proceed to Stage 2.
If you get unexpected errors when checking (such as out of memory errors), or if myisamchk crashes, go to Stage 3.
Stage 2: Easy safe repair
First, try myisamchk -r -q tbl_name (-r -q means “quick recovery mode”). This attempts to repair the index file without touching the data file. If the data file contains everything that it should and the delete links point at the correct locations within the data file, this should work, and the table is fixed. Start repairing the next table. Otherwise, use the following procedure:
Make a backup of the data file before continuing.
Use myisamchk -r tbl_name (-r means “recovery mode”). This removes incorrect rows and deleted rows from the data file and reconstructs the index file.
If the preceding step fails, use myisamchk --safe-recover tbl_name. Safe recovery mode uses an old recovery method that handles a few cases that regular recovery mode does not (but is slower).
Note
If you want a repair operation to go much faster, you should set the values of the sort_buffer_size andkey_buffer_size variables each to about 25% of your available memory when running myisamchk.
If you get unexpected errors when repairing (such as out of memory errors), or if myisamchk crashes, go to Stage 3.
Stage 3: Difficult repair
You should reach this stage only if the first 16KB block in the index file is destroyed or contains incorrect information, or if the index file is missing. In this case, it is necessary to create a new index file. Do so as follows:
Move the data file to a safe place.
Use the table description file to create new (empty) data and index files: shell>
mysql>
mysql>
mysql>
mysql db_namedb_nameSET autocommit=1;TRUNCATE TABLE tbl_name;tbl_namequit
Copy the old data file back onto the newly created data file. (Do not just move the old file back onto the new file. You want to retain a copy in case something goes wrong.)
Important
If you are using replication, you should stop it prior to performing the above procedure, since it involves filesystem operations, and these are not logged by MySQL.
Go back to Stage 2. myisamchk -r -q should work. (This should not be an endless loop.)
You can also use the REPAIR TABLE tbl_name USE_FRM SQL statement, which performs the whole procedure automatically. There is also no possibility of unwanted interaction between a utility and the server, because the server does all the work when you use REPAIR TABLE. See Section 12.5.2.6, “REPAIR TABLE Syntax”.
Stage 4: Very difficult repair
You should reach this stage only if the .frm description file has also crashed. That should never happen, because the description file is not changed after the table is created:
Restore the description file from a backup and go back to Stage 3. You can also restore the index file and go back to Stage 2. In the latter case, you should start with myisamchk -r.
If you do not have a backup but know exactly how the table was created, create a copy of the table in another database. Remove the new data file, and then move the .frm description and .MYI index files from the other database to your crashed database. This gives you new description and index files, but leaves the .MYD data file alone. Go back to Stage 2 and attempt to reconstruct the index file.