怎么从gltf中得到三角面片_史上最简单的饼干 | 三角形酥饼

3502995f-d41f-eb11-8da9-e4434bdf6706.jpeg

这款酥饼,配料只有面粉、黄油、糖。 你还能找出配料更简单的饼干么? 它虽然简单,但味道非常非常酥脆可口。除了制作成三角形,还可以切成方块形。另外,还可以将面团压入模具,烤成厚厚的方块。 为什么这么这么简单的配料,却可以烤出这么美味的酥饼呢?这大概,就是对“less is more”最好的注解了。 【三角形苏格兰酥饼】

(Scottish shortbread)

(参考分量:26片)

配料:低筋面粉100克,黄油75克,细砂糖50克

制作过程

3902995f-d41f-eb11-8da9-e4434bdf6706.jpeg

黄油切成小块软化以后(软化到可以轻松用手指在黄油上按出小坑就可以了),加入细砂糖。用电动打蛋器打发。 打发之前,先不开动电动打蛋器,而是手动搅拌几下,使黄油和糖充分混合(这样可以避免糖粒飞溅)。

3e02995f-d41f-eb11-8da9-e4434bdf6706.jpeg

糖和黄油混合后,再开动电动打蛋器,快速搅打,使黄油被打发。 打发后的黄油体积会明显膨大,颜色变浅,成为图中的蓬松细腻的质地。

4102995f-d41f-eb11-8da9-e4434bdf6706.jpeg

低筋面粉过筛,筛入黄油中。用刮刀拌匀。拌到面粉和黄油充分混合,没有干面粉就可以了。不要过度搅拌。

4302995f-d41f-eb11-8da9-e4434bdf6706.jpeg

拌好的面团夹在两张油纸中间擀开。擀成厚度大约0.6-0.8cm的面片(不要太薄)。撕去上层油纸,将面片切成小三角块形状(面团很软,夹在油纸中擀开会更加方便)。

也可以切成方块形状。

剩余的边角料可以重新揉合成面团再次擀开。但切记,不要过度揉捏,只要成团即可。边角料面团再次揉成团后,酥松度会不如第一次。

4502995f-d41f-eb11-8da9-e4434bdf6706.jpeg

用刮板将切好的饼干面团小心铲起,放在铺了油纸的烤盘上。

如果面团很软很容易变形,可以连同油纸一起放入冰箱冷藏片刻,使面团不那么粘软后再挪到烤盘上。

烤箱预热至上下火180℃,将烤盘放入,中层,烘烤13-15分钟,直到饼干变成金黄色即可出炉。 请根据饼干面团大小、厚度及烤箱的实际温度情况不同,灵活调整烘烤时间。我用的烤箱是君焙蒸烤箱。

4802995f-d41f-eb11-8da9-e4434bdf6706.jpeg

烘烤出炉的饼干,冷却后会变得非常酥脆。 如果饼干冷却后仍然发软,烘烤火候不够,可以放入烤箱继续烤几分钟。 Tips:

这是一款传统的苏格兰酥饼,它的配料只有三样,且无法替代(不要问黄油可不可以换成植物油了哈)。在这个基础上,我们还可以制作一些衍生的口味,比如加入少许香草籽或香草精制作香草口味酥饼,也可以加一些柠檬皮屑。

不过,最简单的苏格兰酥饼,就已经具有无比酥脆的独到口感了。

  • 0
    点赞
  • 0
    收藏
    觉得还不错? 一键收藏
  • 0
    评论
"uniform float gltf_u_dec_texcoord_0_normConstant; uniform vec2 gltf_u_dec_texcoord_0_min; vec2 gltf_a_dec_texcoord_0; uniform float gltf_u_dec_position_normConstant; uniform vec3 gltf_u_dec_position_min; vec3 gltf_a_dec_position; precision highp float; uniform mat4 u_modelViewMatrix; uniform mat4 u_projectionMatrix; #ifdef APPLY_FLATTEN uniform sampler2D gltf_flattenTexture; uniform vec4 gltf_flattenBounds; uniform mat4 gltf_flattenRenderMatrix; uniform mat4 gltf_flattenInverseRenderMatrix; uniform float gltf_flattenHeight; #endif attribute vec3 a_position; attribute vec2 a_texcoord_0; varying vec2 v_texcoord_0; void gltf_decoded_POSITION() { vec3 weightedPosition = gltf_a_dec_position; vec4 position = vec4(weightedPosition, 1.0); position = u_modelViewMatrix * position; gl_Position = u_projectionMatrix * position; #ifdef PICK_VERTEX gl_PointSize = 1.0; #endif #ifdef APPLY_FLATTEN vec4 positionRelative = gltf_flattenInverseRenderMatrix * position; vec2 flattenBoundsDimension = gltf_flattenBounds.zw - gltf_flattenBounds.xy; vec2 texCoord = (positionRelative.xy - gltf_flattenBounds.xy) / flattenBoundsDimension; bool outOfBounds = texCoord.x > 1.0 || texCoord.x < 0.0 || texCoord.y > 1.0 || texCoord.y < 0.0; vec4 color = texture2D(gltf_flattenTexture, texCoord); if(!outOfBounds && abs(color.r - 1.0) < 0.1) { positionRelative.z = gltf_flattenHeight + sin(positionRelative.z) * 0.1; gl_Position = u_projectionMatrix * gltf_flattenRenderMatrix * positionRelative; } #endif v_texcoord_0 = gltf_a_dec_texcoord_0; } void gltf_decoded_TEXCOORD_0() { gltf_a_dec_position = gltf_u_dec_position_min + a_position * gltf_u_dec_position_normConstant; gltf_decoded_POSITION(); } void main() { gltf_a_dec_texcoord_0 = gltf_u_dec_texcoord_0_min + a_texcoord_0 * gltf_u_dec_texcoord_0_normConstant; gltf_decoded_TEXCOORD_0(); } "
02-07

“相关推荐”对你有帮助么?

  • 非常没帮助
  • 没帮助
  • 一般
  • 有帮助
  • 非常有帮助
提交
评论
添加红包

请填写红包祝福语或标题

红包个数最小为10个

红包金额最低5元

当前余额3.43前往充值 >
需支付:10.00
成就一亿技术人!
领取后你会自动成为博主和红包主的粉丝 规则
hope_wisdom
发出的红包
实付
使用余额支付
点击重新获取
扫码支付
钱包余额 0

抵扣说明:

1.余额是钱包充值的虚拟货币,按照1:1的比例进行支付金额的抵扣。
2.余额无法直接购买下载,可以购买VIP、付费专栏及课程。

余额充值