linux开机自动seafile,开机启动 Seafile

# 开机启动 Seafile

### Ubuntu 下

Ubuntu下，我们使用了这个[/etc/init.d/](https://help.ubuntu.com/community/UbuntuBootupHowto)这个脚本来设置Seafile/Seahub 开机启动.

### 创建**/etc/init.d/seafile-server**脚本

~~~

sudo vim /etc/init.d/seafile-server

~~~

脚本内容为: (同时需要修改相应的`user`和`script\_path`字段的值)

~~~

#!/bin/sh

# 请将 user 改为你的Linux用户名

user=haiwen

# 请将 script_dir 改为你的 Seafile 文件安装路径

seafile_dir=/data/haiwen

script_path=${seafile_dir}/seafile-server-latest

seafile_init_log=${seafile_dir}/logs/seafile.init.log

seahub_init_log=${seafile_dir}/logs/seahub.init.log

# 若使用 fastcgi, 请将其设置为true

fastcgi=false

# fastcgi 端口, 默认为 8000.

fastcgi_port=8000

case "$1" in

start)

sudo -u ${user} ${script_path}/seafile.sh start >> ${seafile_init_log}

if [ $fastcgi = true ];

then

sudo -u ${user} ${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log}

else

sudo -u ${user} ${script_path}/seahub.sh start >> ${seahub_init_log}

fi

;;

restart)

sudo -u ${user} ${script_path}/seafile.sh restart >> ${seafile_init_log}

if [ $fastcgi = true ];

then

sudo -u ${user} ${script_path}/seahub.sh restart-fastcgi ${fastcgi_port} >> ${seahub_init_log}

else

sudo -u ${user} ${script_path}/seahub.sh restart >> ${seahub_init_log}

fi

;;

stop)

sudo -u ${user} ${script_path}/seafile.sh $1 >> ${seafile_init_log}

sudo -u ${user} ${script_path}/seahub.sh $1 >> ${seahub_init_log}

;;

*)

echo "Usage: /etc/init.d/seafile {start|stop|restart}"

exit 1

;;

esac

~~~

**注意**: 如果你想在 fastcgi 下运行 Seahub,请设置`fastcgi`变量为`true`

### 为日志文件创建目录

~~~

mkdir /path/to/seafile/dir/logs

~~~

### 创建**/etc/init/seafile-server.conf**文件

#### 非使用 MySQL

~~~

start on (runlevel [2345])

stop on (runlevel [016])

pre-start script

/etc/init.d/seafile-server start

end script

post-stop script

/etc/init.d/seafile-server stop

end script

~~~

#### 使用 MySQL

~~~

start on (started mysql

and runlevel [2345])

stop on (runlevel [016])

pre-start script

/etc/init.d/seafile-server start

end script

post-stop script

/etc/init.d/seafile-server stop

end script

~~~

### 设置 seafile-sever 脚本为可执行文件

~~~

sudo chmod +x /etc/init.d/seafile-server

~~~

### 完成

在升级 Seafile 服务器后请记得更新`script\_path`的值.

### 其他 Debian 系的 Linux 下

### 创建脚本**/etc/init.d/seafile-server**

~~~

sudo vim /etc/init.d/seafile-server

~~~

脚本内容为: (同时需要修改相应的`user`和`script\_path`字段的值)

~~~

#!/bin/sh

### BEGIN INIT INFO

# Provides: seafile-server

# Required-Start: $local_fs $remote_fs $network

# Required-Stop: $local_fs

# Default-Start: 2 3 4 5

# Default-Stop: 0 1 6

# Short-Description: Starts Seafile Server

# Description: starts Seafile Server

### END INIT INFO

# 请将 user 改为你的Linux用户名

user=haiwen

# 请将 script_path 改为你的 Seafile 文件安装路径

seafile_dir=/data/haiwen

script_path=${seafile_dir}/seafile-server-latest

seafile_init_log=${seafile_dir}/logs/seafile.init.log

seahub_init_log=${seafile_dir}/logs/seahub.init.log

# 若使用 fastcgi, 请将其设置为true

fastcgi=false

# fastcgi 端口, 默认为 8000.

fastcgi_port=8000

case "$1" in

start)

sudo -u ${user} ${script_path}/seafile.sh start >> ${seafile_init_log}

if [ $fastcgi = true ];

then

sudo -u ${user} ${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log}

else

sudo -u ${user} ${script_path}/seahub.sh start >> ${seahub_init_log}

fi

;;

restart)

sudo -u ${user} ${script_path}/seafile.sh restart >> ${seafile_init_log}

if [ $fastcgi = true ];

then

sudo -u ${user} ${script_path}/seahub.sh restart-fastcgi ${fastcgi_port} >> ${seahub_init_log}

else

sudo -u ${user} ${script_path}/seahub.sh restart >> ${seahub_init_log}

fi

;;

stop)

sudo -u ${user} ${script_path}/seafile.sh $1 >> ${seafile_init_log}

sudo -u ${user} ${script_path}/seahub.sh $1 >> ${seahub_init_log}

;;

*)

echo "Usage: /etc/init.d/seafile {start|stop|restart}"

exit 1

;;

esac

~~~

**注意**: 如果你想在 fastcgi 下运行 Seahub,请设置`fastcgi`变量为`true`

### 为日志文件创建目录

~~~

mkdir /path/to/seafile/dir/logs

~~~

### 设置 seafile-sever 脚本为可执行文件

~~~

sudo chmod +x /etc/init.d/seafile-server

~~~

### 在 rc.d 中新增 seafile-server

~~~

sudo update-rc.d seafile-server defaults

~~~

### 完成

在升级 Seafile 服务器后请记得更新`script\_path`的值.

### RHEL/CentOS 下

RHEL/CentOS 下,[/etc/rc.local](http://www.centos.org/docs/5/html/Installation_Guide-en-US/s1-boot-init-shutdown-run-boot.html)脚本会随系统开机自动执行,所以我们在这个脚本中设置启动Seafile/Seahub.

- 定位 python(python 2.6 or 2.7)

~~~

which python2.6 # or "which python2.7"

~~~

- 在 /etc/rc.local 脚本中, 将 python2.6(2.7)路径加入到**PATH**字段中,并增加 Seafile/Seahub 启动命令

~~~

`

# 假设 python 2.6(2.7) 可执行文件在 /usr/local/bin 目录下

PATH=$PATH:/usr/local/bin/

# 请将 user 改为你的Linux用户名

user=haiwen

# 请将 script_path 改为你的 Seafile 文件安装路径

seafile_dir=/data/haiwen

script_path=${seafile_dir}/seafile-server-latest

sudo -u ${user} ${script_path}/seafile.sh start > /tmp/seafile.init.log 2>&1

sudo -u ${user} ${script_path}/seahub.sh start > /tmp/seahub.init.log 2>&1

~~~

**注意**: 如果你想在fastcgi下启动Seahub,只需将上文中最后一行**"seahub.sh start"**改为**"seahub.shstart-fastcgi"**

- 完成. 在升级 Seafile 服务器后请记得更新 `script\_pat` 的值.

### 只使用 RHEL/CentOS 为服务程序(service)下

RHEL/CentOS 下 , 我们通过 /etc/init.d/ 脚本将 Seafile/Seahub作为服务程序随开机启动.

### 创建**/etc/sysconfig/seafile**文件

~~~

# 请将 user 改为你的Linux用户名

user=haiwen

# 请将 script_path 改为你的 Seafile 文件安装路径

seafile_dir=/home/haiwen

script_path=${seafile_dir}/seafile-server-latest

seafile_init_log=${seafile_dir}/logs/seafile.init.log

seahub_init_log=${seafile_dir}/logs/seahub.init.log

# 若使用 fastcgi, 请将其设置true

fastcgi=false

# fastcgi 端口, 默认为 8000.

fastcgi_port=8000

~~~

### 创建**/etc/init.d/seafile**文件

~~~

#!/bin/bash

#

# seafile

#

# chkconfig: - 68 32

# description: seafile

# Source function library.

. /etc/init.d/functions

# Source networking configuration.

. /etc/sysconfig/network

if [ -f /etc/sysconfig/seafile ];then

. /etc/sysconfig/seafile

else

echo "Config file /etc/sysconfig/seafile not found! Bye."

exit 200

fi

RETVAL=0

start() {

# Start daemons.

echo -n $"Starting seafile: "

ulimit -n 30000

su - ${user} -c"${script_path}/seafile.sh start >> ${seafile_init_log} 2>&1"

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && touch /var/lock/subsys/seafile

return $RETVAL

}

stop() {

echo -n $"Shutting down seafile: "

su - ${user} -c"${script_path}/seafile.sh stop >> ${seafile_init_log} 2>&1"

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seafile

return $RETVAL

}

# See how we were called.

case "$1" in

start)

start

;;

stop)

stop

;;

restart|reload)

stop

start

RETVAL=$?

;;

*)

echo $"Usage: $0 {start|stop|restart}"

RETVAL=3

esac

exit $RETVAL

~~~

### 创建**/etc/init.d/seahub**脚本

~~~

#!/bin/bash

#

# seahub

#

# chkconfig: - 69 31

# description: seahub

# Source function library.

. /etc/init.d/functions

# Source networking configuration.

. /etc/sysconfig/network

if [ -f /etc/sysconfig/seafile ];then

. /etc/sysconfig/seafile

else

echo "Config file /etc/sysconfig/seafile not found! Bye."

exit 200

fi

RETVAL=0

start() {

# Start daemons.

echo -n $"Starting seahub: "

ulimit -n 30000

if [ $fastcgi = true ];

then

su - ${user} -c"${script_path}/seahub.sh start-fastcgi ${fastcgi_port} >> ${seahub_init_log} 2>&1"

else

su - ${user} -c"${script_path}/seahub.sh start >> ${seahub_init_log} 2>&1"

fi

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && touch /var/lock/subsys/seahub

return $RETVAL

}

stop() {

echo -n $"Shutting down seafile: "

su - ${user} -c"${script_path}/seahub.sh stop >> ${seahub_init_log} 2>&1"

RETVAL=$?

echo

[ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/seahub

return $RETVAL

}

# See how we were called.

case "$1" in

start)

start

;;

stop)

stop

;;

restart|reload)

stop

start

RETVAL=$?

;;

*)

echo $"Usage: $0 {start|stop|restart}"

RETVAL=3

esac

exit $RETVAL

~~~

接下来启动服务程序:

~~~

chmod 550 /etc/init.d/seafile

chmod 550 /etc/init.d/seahub

chkconfig --add seafile

chkconfig --add seahub

chkconfig seahub on

chkconfig seafile on

~~~

执行:

~~~

service seafile start

service seahub start

~~~

### 完成