java实现兵乓球比赛_C语言实现乒乓球比赛

本文实例为大家分享了C语言实现乒乓球比赛的具体代码，供大家参考，具体内容如下

1)、基本要求

用8个LED发光管(红黄绿)的来回滚动显示来模拟打乒乓球时乒乓球在两边球台上的来回运动。比赛双方用按钮/开关(双方各用1个按钮/开关)的方法来模拟发球与接球,即发球方按动其控制的按钮/开关/健,球从发球方一侧向对方运动(LED发光管从发球方到对方逐个点亮,滚动显示),当球运动至接球方时,接球方立即按动其控制的按钮/开关/键,“击球”使球“弹回”发球方一侧，如此周而复始，直至在规定的击球时间内有一方未能完成击球动作，从而对方得一分，然后继续比赛。比赛规则可参照一般的乒乓球比赛规则。

要求：

(1). 球以每0.5秒滚过1个LED的速度移动;

(2). 回球需在球到达后的0.5秒内进行(按下按钮),否则按失球计;

(3). 球未到达提前按下按钮按失球处理，不起回球作用;

(4). 用扩展的4个七段数码(小键盘上)为双方记分(每方2个八段码, ,按10进制计数,初始值00:00,可自行设计显示及规则)

2)、设计提示

球到达接球方后,立即读接球方的按钮状态,若未按则有效(若已按下则按失球计),然后不断读此按钮状态,直到按下代表“击球”动作。(采用中断，可以用同一个按键轮流按动识别)。

3)、进一步设计要求

(1). 在8×8点阵(虚拟大屏)同步显示球移动情况，设计显示输赢球图形状态、效果等；移动、击球等精确(中断)计时;

(2). 通过拨动开关或键盘设定改变球移动速度,即每个LED管点亮时间分别为0.5秒、0.3秒、0.2秒;通过拨动开关或键盘设定改变允许击球时间0.3秒、0.2秒、0.1秒;球移动速度取决于击球时间,即球移动速度(每个LED点亮时间)在0.2~0.5秒内可变,具体取决于球到达接球方后击球所花的时间0~0.5秒如花费的时间短则回球后球移动速度快反之回球后移动

#include "interface.h"

void init8255(void);

const unsigned short Port8255Base=0x288;

const unsigned char ControlWord8255=0x80;

Input/Output.PortA:Output

unsigned char gData=0x80;

int flag=0;

int num=0;

const unsigned char ControlWord8255B = 0x82;

const unsigned char ControlWord8255E = 0x88;

void init8255B(void);

int scoreleft,scoreright;

int speedlamp;

int speed2;

int speed3;

void turnleft()

{

gData=1;

while(1)

{

PortWriteByte(Port8255Base,gData);

if(gData==128)

{

flag=0;

break;

}

gData*=2;

sleep(speedlamp);

}

}

void turnright()

{

gData=128;

while(1)

{

PortWriteByte(Port8255Base,gData);

if(gData==1)

{

flag=1;

break;

}

gData/=2;

sleep(speedlamp);

}

}

unsigned char led[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f};

BYTE pdata;

BYTE reflect;

void main( )

{

init8255B();

//int speedlamp=500;

BYTE controldudu;

PortReadByte(Port8255Base + 2, &controldudu);

printf("%d \n",controldudu);

controldudu/=32;

int k5=controldudu%2;

controldudu/=2;

int k6=controldudu%2;

if(k6==0)

speedlamp=500;

else

speedlamp=50;

if(k5==0)

speed2=500;

else

speed2=1;

printf("%d %d\n",k6,k5);

pdata/=16;

scoreleft=0;

scoreright=0;

BYTE pdata=0;

int k0=0;

int k7=0;

int score0=0;

int score1=0;

BYTE old=0;

BYTE now;

int k0old,k0new,k7old,k7new;

k0old=old%2;

k7old=old/8;

while(1)

{

printf("\n当前分数：%d : %d\n",scoreleft,scoreright);

int yyy=5;

while(yyy--){

PortWriteByte(Port8255Base+2,0x01);

PortWriteByte(Port8255Base+1,led[scoreright%10]);

sleep(1); //delay 100ms

PortWriteByte(Port8255Base+2,0x02);

PortWriteByte(Port8255Base+1,led[scoreright/10]);

sleep(1);

PortWriteByte(Port8255Base+2,0x04);

PortWriteByte(Port8255Base+1,led[scoreleft%10]);

sleep(1); //delay 100ms

PortWriteByte(Port8255Base+2,0x08);

PortWriteByte(Port8255Base+1,led[scoreleft/10]);

sleep(1);

PortWriteByte(Port8255Base+2,0);

}

PortReadByte(Port8255Base + 2, &pdata);

pdata/=16;

sleep(500);

printf("--%d",pdata);

printf("old:%d new:%d\n",old,pdata);

if(old==pdata)

{

continue;

}

else

{

k7old=old/8;

k0old=old%2;

k0new=pdata%2;

k7new=pdata/8;

if(k7old!=k7new)

{

//printf("---here---\n");

again:

turnright();

old=pdata;

k0old=old%2;

PortReadByte(Port8255Base + 2, &now);

now/=16;

k0old=now%2;

if(speed2>50)

{

sleep(200);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=200;

goto r1;

}

else

{

sleep(100);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=1000;

goto r1;

}

else

{

sleep(100);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=4000;

goto r1;

}

else

{

sleep(100);

goto r2;

}

}

}

}

else

sleep(speed2);

r2:

PortReadByte(Port8255Base + 2, &pdata);

pdata/=16;

r1:

k0new=pdata%2;

printf("speedlamp:%d\n",speedlamp);

if(!(old!=pdata&&k0old!=k0new))

{

printf("\n--right lose--\n");

scoreleft++;

sleep(500);

PortReadByte(Port8255Base + 2, &pdata);

pdata/=16;

old=pdata;

k7old=old/8;

k0old=old%2;

k0new=pdata%2;

k7new=pdata/8;

}

else

{

printf("\nback\n");

turnleft();

old=pdata;

k7old=old/8;

PortReadByte(Port8255Base + 2, &now);

k7old=now/128;

if(speed2>50)

{

sleep(200);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=200;

goto r3;

}

else

{

sleep(100);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=1000;

goto r3;

}

else

{

sleep(100);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=4000;

goto r3;

}

else

{

sleep(100);

goto r4;

}

}

}

}

else

sleep(speed2);

r4:

PortReadByte(Port8255Base + 2, &pdata);

pdata/=16;

r3:

k7new=pdata/8;

if(!(old!=pdata&&k7old!=k7new))

{

printf("\n--left lose--\n");

scoreright++;

}

else

{

goto again;

}

}

}

else if(k0old!=k0new)

{

again2:

turnleft();

old=pdata;

k7old=old/8;

PortReadByte(Port8255Base + 2, &now);

k7old=now/128;

if(speed2>50)

{

sleep(200);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=200;

goto r7;

}

else

{

sleep(100);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=1000;

goto r7;

}

else

{

sleep(100);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=2000;

goto r7;

}

else

{

sleep(100);

goto r8;

}

}

}

}

sleep(speed2);

r8:

PortReadByte(Port8255Base + 2, &pdata);

pdata/=16;

r7:

k7new=pdata/8;

if(!(old!=pdata&&k7old!=k7new))

{

printf("\n--left lose--\n");

scoreright++;

sleep(500);

PortReadByte(Port8255Base + 2, &pdata);

pdata/=16;

old=pdata;

k7old=old/8;

k0old=old%2;

k0new=pdata%2;

k7new=pdata/8;

}

else

{

printf("\nback\n");

turnright();

old=pdata;

k7old=old/8;

PortReadByte(Port8255Base + 2, &now);

now/=16;

k0old=now%2;

if(speed2>50)

{

sleep(200);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=200;

goto r5;

}

else

{

sleep(100);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=100;

goto r5;

}

else

{

sleep(100);

PortReadByte(Port8255Base + 2, &reflect);

reflect/=16;

if(!(reflect==pdata))

{

pdata=reflect;

speedlamp=2000;

goto r5;

}

else

{

sleep(100);

goto r6;

}

}

}

}

sleep(speed2);

r6:

PortReadByte(Port8255Base + 2, &pdata);

pdata/=16;

r5:

k7new=pdata/8;

if(!(old!=pdata&&k0old!=k0new))

{

printf("\n--right lose--\n");

scoreleft++;

}

else

{

goto again2;

}

}

}

}

}

Cleanup();

}

void init8255(void)

{

if (!Startup())

{

printf("\n\n ERROR: Open Device Error!请打开实验箱电源\n");

_getch();

exit(0);

}

PortWriteByte(Port8255Base + 3, ControlWord8255);

}

void init8255B(void)

{

if (!Startup())

{

printf("\n\n ERROR: Open Device Error!请打开实验箱电源\n");

_getch();

exit(0); // return to Windows

}

PortWriteByte(Port8255Base + 3, ControlWord8255E);

}

以上就是本文的全部内容，希望对大家的学习有所帮助，也希望大家多多支持脚本之家。