linux内核pcie,代码阅读 - Linux\kernel\linux-5.0\drivers\pci\hotplug\pciehp_pci.c

// SPDX-License-Identifier: GPL-2.0+

/*

* PCI Express Hot Plug Controller Driver

*

* Copyright (C) 1995,2001 Compaq Computer Corporation

* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)

* Copyright (C) 2001 IBM Corp.

* Copyright (C) 2003-2004 Intel Corporation

*

* All rights reserved.

*

* Send feedback to , *

*/

#include

#include

#include

#include "../pci.h"

#include "pciehp.h"

/**

* pciehp_configure_device() - enumerate PCI devices below a hotplug bridge

* @ctrl: PCIe hotplug controller

*

* Enumerate PCI devices below a hotplug bridge and add them to the system.

* Return 0 on success, %-EEXIST if the devices are already enumerated or

* %-ENODEV if enumeration failed.

*/

int pciehp_configure_device(struct controller *ctrl)

{

struct pci_dev *dev;

struct pci_dev *bridge = ctrl->pcie->port;

struct pci_bus *parent = bridge->subordinate;

int num, ret = 0;

pci_lock_rescan_remove();

dev = pci_get_slot(parent, PCI_DEVFN(0, 0));

if (dev) {

/*

* The device is already there. Either configured by the

* boot firmware or a previous hotplug event.

*/

ctrl_dbg(ctrl, "Device %s already exists at %04x:%02x:00, skipping hot-add\n",

pci_name(dev), pci_domain_nr(parent), parent->number);

pci_dev_put(dev);

ret = -EEXIST;

goto out;

}

num = pci_scan_slot(parent, PCI_DEVFN(0, 0));

if (num == 0) {

ctrl_err(ctrl, "No new device found\n");

ret = -ENODEV;

goto out;

}

for_each_pci_bridge(dev, parent)

pci_hp_add_bridge(dev);

pci_assign_unassigned_bridge_resources(bridge);

pcie_bus_configure_settings(parent);

pci_bus_add_devices(parent);

out:

pci_unlock_rescan_remove();

return ret;

}

/**

* pciehp_unconfigure_device() - remove PCI devices below a hotplug bridge

* @ctrl: PCIe hotplug controller

* @presence: whether the card is still present in the slot;

*true for safe removal via sysfs or an Attention Button press,

*false for surprise removal

*

* Unbind PCI devices below a hotplug bridge from their drivers and remove

* them from the system. Safely removed devices are quiesced. Surprise

* removed devices are marked as such to prevent further accesses.

*/

void pciehp_unconfigure_device(struct controller *ctrl, bool presence)

{

struct pci_dev *dev, *temp;

struct pci_bus *parent = ctrl->pcie->port->subordinate;

u16 command;

ctrl_dbg(ctrl, "%s: domain:bus:dev = %04x:%02x:00\n",

__func__, pci_domain_nr(parent), parent->number);

if (!presence)

pci_walk_bus(parent, pci_dev_set_disconnected, NULL);

pci_lock_rescan_remove();

/*

* Stopping an SR-IOV PF device removes all the associated VFs,

* which will update the bus->devices list and confuse the

* iterator. Therefore, iterate in reverse so we remove the VFs

* first, then the PF. We do the same in pci_stop_bus_device().

*/

list_for_each_entry_safe_reverse(dev, temp, &parent->devices,

bus_list) {

pci_dev_get(dev);

pci_stop_and_remove_bus_device(dev);

/*

* Ensure that no new Requests will be generated from

* the device.

*/

if (presence) {

pci_read_config_word(dev, PCI_COMMAND, &command);

command &= ~(PCI_COMMAND_MASTER | PCI_COMMAND_SERR);

command |= PCI_COMMAND_INTX_DISABLE;

pci_write_config_word(dev, PCI_COMMAND, command);

}

pci_dev_put(dev);

}

pci_unlock_rescan_remove();

}