catch (Exception e) {
// TODO Auto-generated catch block
lr.end_transaction("searchItemList_man",lr.FAIL);
e.printStackTrace();
}
二.Function two_way_comm_post_message / two_way_comm_post_message_ex failed错误
在Controller里运行脚本,运行一段时间以后出现如下error messages。
1. Code - 60990 Error: Two Way Communication Error: Function two_way_comm_post_message / two_way_comm_post_message_ex failed.
2. Code - 29739 Error: Service client with id=1 failed to post a message, reason - communication error.
3. Code - 16895 Error: Failed to post xdr buffers data array by post_ex.
4. Code - 10343 Error: Communication error: Cannot send the message since reached the shared memory buffer max size.
问题诱因1:
共享内存缓存溢出,造成Controller和Load Generator之间通讯出现问题。
解决方案:
修改两个配置文件。
1. $installation folder$\dat\channel_configure.dat
2. $installation folder$\launch_service\dat\channel_configure.dat
在这两个文件中的[general]部分下添加如下配置。
shared_memory_max_size=100 (修改共享内存为100MB,默认是50MB)
重新启动Controller,问题解决。
问题诱因2
打开 controller中的 diagnostics菜单,点掉复选框.. 步骤如下图
1.
2. 点掉 Enable the following diagnostics
3. 整理了一下 这个功能是干么滴:
当场景中打开 Diagnostics 菜单下 Web Page Diagnostics 功能后, 才能得到网页分析组图。
通过该图, 可以对事务的组成进行抽丝剥茧的分析, 得到组成这个页面的每一个请求的时间分析, 进 一步了解响应时间中有关网络和服务器处理时间的分配关系。
可以实现对网站的前端性能分析, 明确系统响应时间较长是由服务器端处理能力不足还是客户端链接 到服务器的网络消耗导致的。
三. Fatal Error -26000: Not enough memory (12320 bytes) for "new buffer in LrwSrvNetTaskIt 问题解决及lr脚本心得
现象: 用loadrunner跑场景的时候报错:
Action.c(28): Fatal Error -26000: Not enough memory (12320 bytes) for "new buffer in LrwSrvNetTaskItem::AllocSrvNetBuf". Aborting 的错误,
同时任务管理器里mmdrv.exe 内存占用一直增大,最终mmdrv.exe崩溃. 网上有人认为是 lr的 emulation browser设置问题,最后发现系脚本问题,原脚本声明了好几个变量,而且都未使用:
1 Action()
2 {
3
4 //返回的字符串
5 char resp_txt[200] = {0};
6 //写入流的数据
7 long myfile;
8 //当前日期时间
9 long now;
10 .....
11 ......
12
13 return 0;
14 }
解决方法及总结:
后将此三个变量注释之后问题解决.
结论:LR的脚本要注意内存的使用,尽量减少变量声明,对于char类型的变量要及时用free:即:
1 char * a;
2 free (a);