linux查看cached的内容,linux内存cached内容

/usr/bin/linux-fincore --pages=false --summarize --only-cached *

也可以查看指定文件的缓存情况：

linux-fincore -o /usr/lib64/libz.so.1.2.7

或者直接--help查看帮助信息--pages=false      Do not print pages

--summarize        When comparing multiple files, print a summary report

--only-cached      Only print stats for files that are actually in cache.

：

他只能查看指定的文件是否是被缓存的，而不能指定目录，因为的。

有两种办法安装这个linux-ftools软件包：

１.rpm安装：

2.源码安装，说明如下：

我在google上搜到一个gihub地址：

https://www.rpmfind.net/linux/rpm2html/search.php?query=linux-ftools

下面一篇安装文章是在google上搜索到的　：Installation Instructions

This file is free documentation; the Free Software Foundation gives

unlimited permission to copy, distribute and modify it.

Basic Installation

==================

Briefly, the shell commands `./configure; make; make install' should

configure, build, and install this package.  The following

more-detailed instructions are generic; see the `README' file for

instructions specific to this package.

The `configure' shell script attempts to guess correct values for

various system-dependent variables used during compilation.  It uses

those values to create a `Makefile'in each directory of the package.

It may also create one or more `.h' files containing system-dependent

definitions.  Finally, it creates a shell script `config.status' that

you can run in the future to recreate the current configuration, and a

file `config.log' containing compiler output (useful mainly for

debugging `configure').

It can also use an optional file (typically called `config.cache'

and enabled with `--cache-file=config.cache' or simply `-C') that saves

the results of its tests to speed up reconfiguring.  Caching is

disabled by default to prevent problems with accidental use of stale

cache files.

If you need to do unusual things to compile the package, please try

to figure out how `configure' could check whether to do them, and mail

diffs or instructions to the address given in the `README' so they can

be considered for the next release.  If you are using the cache, and at

some point `config.cache' contains results you don't want to keep, you

may remove or edit it.

The file `configure.ac' (or `configure.in') is used to create

`configure' by a program called `autoconf'.  You need `configure.ac' if

you want to change it or regenerate `configure' using a newer version

of `autoconf'.

The simplest way to compile this package is:

1. `cd' to the directory containing the package's source code and type

`./configure' to configure the package for your system.

Running `configure' might take a while.  While running, it prints

some messages telling which features it is checking for.

2. Type `make'to compile the package.

3. Optionally, type `make check' to run any self-tests that come with

the package.

4. Type `make install' to install the programs and any data files and

documentation.

5. You can remove the program binaries and object files from the

source code directory by typing `make clean'.  To also remove the

files that `configure' created (so you can compile the package for

a different kind of computer), type `make distclean'.  There is

also a `make maintainer-clean' target, but that is intended mainly

for the package's developers.  If you use it, you may have to get

all sorts of other programs in order to regenerate files that came

with the distribution.

Compilers and Options

=====================

Some systems require unusual options for compilation or linking that the

`configure' script does not know about.  Run `./configure --help' for

details on some of the pertinent environment variables.

You can give `configure' initial values for configuration parameters

by setting variables in the command line or in the environment.  Here

is an example:

./configure CC=c99 CFLAGS=-g LIBS=-lposix

*Note Defining Variables::, for more details.

Compiling For Multiple Architectures

====================================

You can compile the package for more than one kind of computer at the

same time, by placing the object files for each architecture in their

own directory.  To do this, you can use GNU `make'.  `cd' to the

directory where you want the object files and executables to go and run

the `configure' script.  `configure' automatically checks for the

source code in the directory that `configure' is in and in `..'.

With a non-GNU `make', it is safer to compile the package for one

architecture at a time in the source code directory.  After you have

installed the package for one architecture, use `make distclean' before

reconfiguring for another architecture.

Installation Names

==================

By default, `make install' installs the package's commands under

`/usr/local/bin', include files under `/usr/local/include', etc.  You

can specify an installation prefix other than `/usr/local' by giving

`configure' the option `--prefix=PREFIX'.

You can specify separate installation prefixes for

architecture-specific files and architecture-independent files.  If you

pass the option `--exec-prefix=PREFIX' to `configure', the package uses

PREFIX as the prefix for installing programs and libraries.

Documentation and other data files still use the regular prefix.

In addition, if you use an unusual directory layout you can give

options like `--bindir=DIR' to specify different values for particular

kinds of files.  Run `configure --help' for a list of the directories

you can set and what kinds of files go in them.

If the package supports it, you can cause programs to be installed

with an extra prefix or suffix on their names by giving `configure' the

option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.

Optional Features

=================

Some packages pay attention to `--enable-FEATURE' options to

`configure', where FEATURE indicates an optional part of the package.

They may also pay attention to `--with-PACKAGE' options, where PACKAGE

is something like `gnu-as' or `x' (for the X Window System).  The

`README' should mention any `--enable-' and `--with-' options that the

package recognizes.

For packages that use the X Window System, `configure' can usually

find the X include and library files automatically, but if it doesn't,

you can use the `configure' options `--x-includes=DIR' and

`--x-libraries=DIR' to specify their locations.

Specifying the System Type

==========================

There may be some features `configure' cannot figure out automatically,

but needs to determine by the type of machine the package will run on.

Usually, assuming the package is built to be run on the _same_

architectures, `configure' can figure that out, but if it prints a

message saying it cannot guess the machine type, give it the

`--build=TYPE' option.  TYPE can either be a short name for the system

type, such as `sun4', or a canonical name which has the form:

CPU-COMPANY-SYSTEM

where SYSTEM can have one of these forms:

OS KERNEL-OS

See the file `config.sub' for the possible values of each field.  If

`config.sub' isn't included in this package, then this package doesn't

need to know the machine type.

If you are _building_ compiler tools for cross-compiling, you should

use the option `--target=TYPE' to select the type of system they will

produce code for.

If you want to _use_ a cross compiler, that generates code for a

platform different from the build platform, you should specify the

"host" platform (i.e., that on which the generated programs will

eventually be run) with `--host=TYPE'.

Sharing Defaults

================

If you want to set default values for `configure' scripts to share, you

can create a site shell script called `config.site' that gives default

values for variables like `CC', `cache_file', and `prefix'.

`configure' looks for `PREFIX/share/config.site' if it exists, then

`PREFIX/etc/config.site' if it exists.  Or, you can set the

`CONFIG_SITE' environment variable to the location of the site script.

A warning: not all `configure' scripts look for a site script.

Defining Variables

==================

Variables not defined in a site shell script can be set in the

environment passed to `configure'.  However, some packages may run

configure again during the build, and the customized values of these

variables may be lost.  In order to avoid this problem, you should set

them in the `configure' command line, using `VAR=value'.  For example:

./configure CC=/usr/local2/bin/gcc

causes the specified `gcc' to be used as the C compiler (unless it is

overridden in the site shell script).

Unfortunately, this technique does not work for `CONFIG_SHELL' due to

an Autoconf bug.  Until the bug is fixed you can use this workaround:

CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash

`configure' Invocation

======================

`configure' recognizes the following options to control how it operates.

`--help'

`-h'

Print a summary of the options to `configure', and exit.

`--version'

`-V'

Print the version of Autoconf used to generate the `configure'

script, and exit.

`--cache-file=FILE'

Enable the cache: use and save the results of the tests in FILE,

traditionally `config.cache'.  FILE defaults to `/dev/null' to

disable caching.

`--config-cache'

`-C'

Alias for `--cache-file=config.cache'.

`--quiet'

`--silent'

`-q'

Do not print messages saying which checks are being made.  To

suppress all normal output, redirect it to `/dev/null' (any error

messages will still be shown).

`--srcdir=DIR'

Look for the package's source code in directory DIR.  Usually

`configure' can determine that directory automatically.

`configure' also accepts some other, not widely useful, options.  Run

`configure --help' for more details.

下面是在网上找的一个脚本：

首先，我们来熟悉一下命令：

ps -e -o pid,rss

-e和-A效果相同,显示所有的进程

-o表示后面是按照什么格式输出

ps -e -o pid,rss|sed -n '2,$p' | sort -nk2 -r所以网上这个脚本需要改一下

-r反向排序

代码如下：

#!/bin/bash

#Author: Shanker

#Time: 2016/06/08

#set -e

#set -u

#you have to install linux-fincore

if [ ! -f /usr/bin/linux-fincore ]

then

echo "You haven't installed linux-fincore yet"

exit

fi

#find the top 10 processs' cache file

ps -e -o pid,rss|sed -n '2,$p'| sort -nk2 -r|head -50 |awk '{print $1}'>/tmp/cache.pids

#find all the processs' cache file

#ps -e -o pid>/tmp/cache.pids

if [ -f /tmp/cache.files ]

then

echo "the cache.files is exist, removing now "

rm -f /tmp/cache.files

fi

while read line

do

lsof -p $line 2>/dev/null|awk '{print $9}' >>/tmp/cache.files

done

if [ -f /tmp/cache.fincore ]

then

echo "the cache.fincore is exist, removing now"

rm -f /tmp/cache.fincore

fi

for i in `cat /tmp/cache.files`

do

if [ -f $i ]

then

echo $i >>/tmp/cache.fincore

fi

done

/usr/bin/linux-fincore -s  `cat /tmp/cache.fincore`

rm -f /tmp/cache.{pids,files,fincore}