动态路由器ensp二层三层交换_eNSP模拟器二层交换机使用路由器单臂路由配置

启动路由器，进入CLI控制台在路由器物理端口GigabitEthernet0/0/0虚拟两个端口对应两个vlan,命令如下：

system-view

Enter system view, return user view with Ctrl+Z.

[Huawei]inter gi 0/0/0.1

[Huawei-GigabitEthernet0/0/0.1]dot1q termination vid 2

[Huawei-GigabitEthernet0/0/0.1]ip address 10.5.1.254 255.255.255.0

[Huawei-GigabitEthernet0/0/0.1]arp broadcast enable

[Huawei-GigabitEthernet0/0/0.1]quit

[Huawei]inter gi 0/0/0.2

[Huawei-GigabitEthernet0/0/0.2]dot1q termination vid 3

[Huawei-GigabitEthernet0/0/0.2]ip address 10.5.2.254 255.255.255.0

[Huawei-GigabitEthernet0/0/0.2]arp broadcast enable