python3.7.4安装教程桌面_python3.7.4 安装

​本文主要介绍如何在Centos7中通过源码包编译安装方式安装python3.7版本；在安装python3.7之前，切记不要卸载centos自带的python2版本，也不要把python3命名为python， 因为linux的一些自带命令会用到系统自带python2。

下载地址

1. 安装依赖包

[root@localhost ~]# yum -y groupinstall "Development tools"

[root@localhost ~]# yum -y install gcc* zlib-devel bzip2-devel openssl-devel ncurses-devel sqlite-devel readline-devel tk-devel gdbm-devel db4-devel libpcap-devel xz-devel

# 不安装会在编译安装时报错

[root@localhost ~]# yum install libffi-devel -y

注意： 安装时可能出现的错误

1. 安装时报错 No module named '_ctypes'

3.7版本需要一个新的包libffi-devel，安装此包之后再次进行编译安装即可。

2. 安装时报错 以下

configure: error: in /root/Python-3.7.4':

configure: error: no acceptable C compiler found in $PATH

See ‘config.log’ for more details

缺少 gcc包 安装 yum -y install gcc* 即可

2. 下载，解压安装包

# 很多种方式 ，放在家目录就行

[root@localhost ~]# ls

anaconda-ks.cfg Python-3.7.4.tgz

# 解压压缩包

[root@localhost ~]# tar xvf Python-3.7.4.tgz

3. 编译安装

# 创建安装python3的路径

[root@localhost ~]# mkdir -p /usr/local/python3

# 进入解压后的 Python目录 进行编译安装

[root@localhost ~]# cd Python-3.7.4

# 1.进行配置编译安装 # --prefix 指定程序存放路径

[root@localhost Python-3.7.4]# ./configure --prefix=/usr/local/python3

# 2. 编译安装 这步时间有点长，上面依赖包都安装一般不会报错

[root@localhost Python-3.7.4]# make && make install

4. 创建软连接

# 创建软连接 让命令成为系统命令，在任何路径都可以调用

[root@localhost bin]# ln -s /usr/local/python3/bin/python3 /usr/local/bin/python3

[root@localhost bin]# ln -s /usr/local/python3/bin/pip3 /usr/local/bin/pip3

5. 验证是否安装成功

[root@localhost ~]# python3 -V

Python 3.7.4

[root@localhost ~]# pip3 -V

pip 19.0.3 from /usr/local/python3/lib/python3.7/site-packages/pip (python 3.7)

# 提示版本 表示安装成功

# 到此安装结束

附加错误：

pip3 list 报错 TLS/SSL

错误信息

pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.

Collecting virtualenv

Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/virtualenv/

Retrying (Retry(total=3, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/virtualenv/

Retrying (Retry(total=2, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/virtualenv/

Retrying (Retry(total=1, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/virtualenv/

Retrying (Retry(total=0, connect=None, read=None, redirect=None, status=None)) after connection broken by 'SSLError("Can't connect to HTTPS URL because the SSL module is not available.")': /simple/virtualenv/

Could not fetch URL https://pypi.org/simple/virtualenv/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/virtualenv/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping

Could not find a version that satisfies the requirement virtualenv (from versions: )

No matching distribution found for virtualenv

pip is configured with locations that require TLS/SSL, however the ssl module in Python is not available.

Could not fetch URL https://pypi.org/simple/pip/: There was a problem confirming the ssl certificate: HTTPSConnectionPool(host='pypi.org', port=443): Max retries exceeded with url: /simple/pip/ (Caused by SSLError("Can't connect to HTTPS URL because the SSL module is not available.")) - skipping

原因

yum 安装的openssl 版本都比较低。需要对openssl进行升级，并重新编译python3.7

2 升级openssl

1.下载openssl

[root@localhost ~]# wget https://www.openssl.org/source/openssl-1.1.1a.tar.gz

[root@localhost ~]# tar -xvf openssl-1.1.1a.tar.gz

[root@localhost ~]# cd openssl-1.1.1a

# 2.编译安装

[root@localhost openssl-1.1.1a]# ./config --prefix=/usr/local/openssl no-zlib #不需要zlib

[root@localhost openssl-1.1.1a]# make

[root@localhost openssl-1.1.1a]# make install

# 3.备份原配置

[root@localhost ~]# mv /usr/bin/openssl /usr/bin/openssl.bak

[root@localhost ~]# mv /usr/include/openssl/ /usr/include/openssl.bak

# 4.新版配置

[root@localhost ~]# ln -s /usr/local/openssl/include/openssl /usr/include/openssl

[root@localhost ~]# ln -s /usr/local/openssl/lib/libssl.so.1.1 /usr/local/lib64/libssl.so

[root@localhost ~]# ln -s /usr/local/openssl/bin/openssl /usr/bin/openssl

# 5.修改系统配置

## 写入openssl库文件的搜索路径

[root@localhost ~]# echo "/usr/local/openssl/lib" >> /etc/ld.so.conf

## 使修改后的/etc/ld.so.conf生效

[root@localhost ~]# ldconfig -v

# 6.查看openssl版本

[root@localhost ~]# openssl version

openssl version 提示：

/usr/local/openssl/bin/openssl: error while loading shared libraries: libssl.so.1.1: cannot open shared object file: No such file or directory

假如你的libssl.so.1.1 文件在/usr/local/openssl/lib/下面，可以这样做

ln -s /usr/local/openssl/lib/libssl.so.1.1 /usr/lib64/libssl.so.1.1

ln -s /usr/local/openssl/lib/libcrypto.so.1.1 /usr/lib64/libcrypto.so.1.1

重新安装python

[root@localhost ~]# cd Python-3.7.4

[root@localhost Python-3.7.4]# ./configure --prefix=/usr/local/python3 --with-openssl=/usr/local/openssl

[root@localhost Python-3.7.4]# make && make install