zemax评价函数编辑器_zemax常用评价函数操作数..doc

zemax常用评价函数操作数.

Operand Definitions

ZEMAX supports optimization operands which are used to define the merit function. Each operand may be assigned a weight which indicates the relative importance of that operand, as well as a target, which is the desired value for that operand. The operands are listed below.

ABSO: Absolute value 绝对值

ACOS: Arccosine

AMAG: Angular magnification 角放大率

ANAR: Angular aberration

ASIN: Arcsine

ASTI: Astigmatism　初级像散

ATAN: Arctangent

AXCL: Axial color

BLNK: Blank

BSER: Boresight Error

COGT: Conic greater than

COLT: Conic less than

COMA: Coma 初级彗差

CONF: Configuration #

CONS: Constant 常量

COSI: Cosine

COVA: Conic value

CTGT: Center thickness greater than 中心厚度(间隔)大于

CTLT: Center thickness less than 中心厚度(间隔)小于

CTVA: Center thickness value 中心厚度(间隔)等于

CVGT: Curvature greater than 曲率大于

CVLT: Curvature less than 曲率小于

CVOL: Cylinder volume

CVVA: Curvature value 曲率等于

DENC: Diffraction encircled energy

DENF: Diffraction encircled energy fraction

DIFF: Difference

DIMX: Distortion max 最大畸变

DISC: Distortion calibrated

DISG: Generalized distortion

DIST: Distortion 畸变

DIVI: Division

DLTN: Delta N

DMFS: Default merit function start 默认评价函数起始点

DMGT: Diameter greater than 直径大于

DMLT: Diameter less than　　直径小于

DMVA: Diameter value　　直径值

DXDX: Derivative Dx/Dx

DXDY: Derivative Dx/Dy

DYDX: Derivative Dy/Dx

DYDY: Derivative Dy/Dy

EFFL: Effective focal length 有效焦距

EFLX: Effective focal length x x方向焦距

EFLY: Effective focal length y　　y方向焦距

ENDX: End execution

ENPP: Entrance pupil position 入瞳位置

EPDI: Entrance pupil diameter 入瞳直径

EQUA: Equal

ETGT: Edge thickness greater than 边缘厚度大于

ETLT: Edge thickness less than 边缘厚度小于

ETVA: Edge thickness value 边缘厚度等于

EXPP: Exit pupil position 出瞳位置

FCGS: Field curvature, generalized, sagittal

FCGT: Field curvature, gen