Linux：httpd服务（二）

最新推荐文章于 2024-08-08 03:40:55 发布

杜达达

最新推荐文章于 2024-08-08 03:40:55 发布

阅读量2k

点赞数 2

分类专栏： Linux服务文章标签： httpd

本文链接：https://blog.csdn.net/weixin_40001704/article/details/83155681

版权

Linux服务专栏收录该内容

24 篇文章 0 订阅

订阅专栏

httpd

提供web服务的软件apache
官网：http://httpd.apache.org/
yum install httpd

一、Rpm安装程序环境：

1、配置文件：
/etc/httpd/conf/httpd.conf
/etc/httpd/conf.d/*.conf

2、模块相关的配置文件：（配置文件模块化）
/etc/httpd/conf.modules.d/*.conf

3、systemdunit file：
/usr/lib/systemd/system/httpd.service

4、主程序文件：
/usr/sbin/httpd
httpd-2.4支持MPM的动态切换

5、日志文件：
/var/log/httpd
access_log：访问日志
error_log：错误日志

6、站点文档：
/var/www/html

7、模块文件路径：
/usr/lib64/httpd/modules

8、服务控制：
systemctl enable|disable httpd.service
systemctl{start|stop|restart|status} httpd.service

二、主配置文件

/etc/httpd/conf/httpd.conf：

[root@centos7-7 conf]#cp httpd.conf{,.origin} 最好复制一份，以免误删改
配置文件中格式：Directive Value （指令+加值）指令首字母大写（路径需注意大小写）

[root@centos7-7 ~]#vim /etc/httpd/conf/httpd.conf
....
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
#
# Do not add a slash at the end of the directory path.  If you point
# ServerRoot at a non-local disk, be sure to specify a local disk on the
# Mutex directive, if file-based mutexes are used.  If you wish to share the
# same ServerRoot for multiple httpd daemons, you will need to change at
# least PidFile.
#
ServerRoot "/etc/httpd"（应用程序的基准目录，所有设置相对路径的起始位置）

#
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, instead of the default. See also the <VirtualHost>
# directive.
#
# Change this to Listen on specific IP addresses as shown below to 
# prevent Apache from glomming onto all bound IP addresses.
#
#Listen 12.34.56.78:80
Listen 80 （监听的套接字，使用所有的IP的80端口）
Listen 172.20.0.61:8080 （可指定IP地址及端口）
# Dynamic Shared Object (DSO) Support

#
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available _before_ they are used.
# Statically compiled modules (those listed by `httpd -l') do not need
# to be loaded here.
#
# Example:
# LoadModule foo_module modules/mod_foo.so
#
Include conf.modules.d/*.conf （配置文件模块化的组成部分，相对路径）

#
# If you wish httpd to run as a different user or group, you must run
# httpd as root initially and it will switch.  
#
# User/Group: The name (or #number) of the user/group to run httpd as.
# It is usually good practice to create a dedicated user and group for
# running httpd, as with most system services.
#
User apache   （以哪个用户身份运行当前程序，ps aux可查看）
Group apache

三、MPM工作模式

•prefork：多进程I/O模型，每个进程响应一个请求，默认模型
一个主进程：生成和回收n个子进程，创建套接字，不响应请求
多个子进程：工作work进程，每个子进程处理一个请求；系统初始时，预
先生成多个空闲进程，等待请求，最大不超过1024个

prefork的默认配置：
StartServers8
MinSpareServers5
MaxSpareServers20
ServerLimit256 最多进程数,最大20000
MaxClients256 最大并发
MaxRequestsPerChild4000 子进程最多能处理的请求数量。在处理MaxRequestsPerChild个请求之后,子进程将会被父进程终止，这时候子进程占用的内存就会释放(为0时永远不释放）

•worker：复用的多进程I/O模型,多进程多线程，IIS使用此模型
一个主进程：生成m个子进程，每个子进程负责生个n个线程，每个线程响
应一个请求，并发响应请求：m*n

worker的默认配置：
StartServers4
MaxClients300
MinSpareThreads25
MaxSpareThreads75
ThreadsPerChild25
MaxRequestsPerChild0 无限制

•event：事件驱动模型（worker模型的变种）
一个主进程：生成m个子进程，每个进程直接响应n个请求，并发响应请求
：m*n，有专门的线程来管理这些keep-alive类型的线程，当有真实请求时
，将请求传递给服务线程，执行完毕后，又允许释放。这样增强了高并发
场景下的请求处理能力
(最大连接并发数MaxRequestWorkers/ThreadsPerChild应小于等于ServerLimit)
使用event 系统必须支持事件驱动机制
epoll -Linux
kqueue -BSD
event ports -Solaris

/etc/httpd/conf.modules.d/00-mpm.conf

[root@centos7-7 ~]#cd /etc/httpd/conf.modules.d/
[root@centos7-7 conf.modules.d]#ls       （00,01文件名前面数字是启动顺序，因为存在依赖关系,模块不适用，更改后缀即可）
00-base.conf  00-dav.conf  00-lua.conf  00-mpm.conf  00-proxy.conf  00-systemd.conf  01-cgi.conf
[root@centos7-7 conf.modules.d]#vim 00-mpm.conf 
# Select the MPM module which should be used by uncommenting exactly
# one of the following LoadModule lines:

# prefork MPM: Implements a non-threaded, pre-forking web server
# See: http://httpd.apache.org/docs/2.4/mod/prefork.html
LoadModule mpm_prefork_module modules/mod_mpm_prefork.so （默认开启prefork:预生成)

# worker MPM: Multi-Processing Module implementing a hybrid
# multi-threaded multi-process web server
# See: http://httpd.apache.org/docs/2.4/mod/worker.html
#
#LoadModule mpm_worker_module modules/mod_mpm_worker.so 
（切换注意需重启才可生效,生产用利用排干，灰度方式替换）

# event MPM: A variant of the worker MPM with the goal of consuming
# threads only for connections with active processing
# See: http://httpd.apache.org/docs/2.4/mod/event.html
#
#LoadModule mpm_event_module modules/mod_mpm_event.so 


可直接在此配置文件中自定义相应模块的参数（注意不能混搭，如prefork写worker参数）
StartServers8
MinSpareServers5
MaxSpareServers20
ServerLimit256 
MaxClients256 
MaxRequestsPerChild4000

httpd 选项

httpd -M 可查看启用的模块
httpd -t 检查语法
httpd -l 查看静态模块（编译进去的模块）
httpd -L 列出所有可用的模块

四、httpd上主机主要需定义的参数

1、ServerName:主机名，以标识当前主机

2、DocumentRoot：url的根，映射到本地文件系统的路径 /path/to/somedir

3、对路径/path/to/somedir下的网页文件，定义，允许那些人访问，不允许哪些人访问，怎么能够被访问，做属性设定

4、Require:更加精细访问设置 (-59512)

<Directory ""> 
Require all granted 所有人可访问
Require user dadda  只允许dadda访问
Require 192.168     只允许192.168.0.0网段访问
</Directory>

<File ""> 指定文件
</File>

<DirectoryMatch "">支持正则表达式
</DiretoryMatch>

<Location " ">url路径   LocationMatch也支持正则表达式，但是不建议用，会降低性能
</Location " ">

etc/httpd/conf/httpd.conf

# ServerName gives the name and port that the server uses to identify itself.
# This can often be determined automatically, but we recommend you specify
# it explicitly to prevent problems during startup.
#
# If your host doesn't have a registered DNS name, enter its IP address here.
#
#ServerName www.example.com:80  
ServerName centos7.dushan.com:80(互联网名称DNS解析到当前的主机名）

#
# Deny access to the entirety of your server's filesystem. You must
# explicitly permit access to web content directories in other 
# <Directory> blocks below.
#
<Directory />            
    AllowOverride none
    Require all denied    /直接访问拒绝,不允许任何人更改，只允许访问documentroot即可
</Directory>

#
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
#
DocumentRoot "/var/www/html" 真正访问的页面

#
# Relax access to content within /var/www.
<Directory "/var/www">
    AllowOverride None
    # Allow open access:
    Require all granted  
</Directory>

# Further relax access to the default document root:
<Directory "/var/www/html">     以下定义访问/var/www/html规则
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options Indexes FollowSymLinks        访问网页时时如何响应，默认链接index.html文件，可改为none
    （删除Indexes 则显示被拒  注：当没有index.html文件时）
    （删除FollowSymLinks，则不允许链接源文件）
    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None   是否允许对应的配置文件覆盖

    #
    # Controls who can get stuff from this server.
    #
    Require all granted   

（Require可以做更为精细设置，Require user和Require ip给出以后就算设置了白名单，其他的则被拒绝）
（若引用Require not,需配合<RequireAll>使用)
...

五、基于用户的访问控制

不建议基于ip地址的认证，虽然高效，但是灵活性极差，并且很容易被伪装

• 认证质询：WWW-Authenticate：响应码为401，拒绝客户端请求，并说明要求
客户端提供账号和密码
• 认证：Authorization：客户端用户填入账号和密码后再次发送请求报文；认证
通过时，则服务器发送响应的资源
• 认证方式两种：
basic：明文
digest：消息摘要认证,兼容性差
• 安全域：需要用户认证后方能访问的路径；应该通过名称对其进行标识，以便
于告知用户认证的原因
定义安全域格式：

<Directory “/path">
Options None
AllowOverride None  是否允许覆盖
AuthType Basic      认证类型
AuthName "String"   认证提示，"string"内容自行修改
AuthUserFile "/PATH/HTTPD_USER_PASSWD_FILE" 认证密码文件路径，通过htpasswd生成
Require user username  允许的用户
</Directory>


Require valid-user 允许账号文件中的所有用户登录访问

AuthGroupFile "/etc/httpd/conf/.htgroup"  创建组用户文件访问(需手动创建）
vim /etc/httpd/conf/.htgroup 
（编辑内容disney: tom jerry) 
Require group disney

• 用户的账号和密码
虚拟账号：仅用于访问某服务时用到的认证标识
存储：文本文件，SQL数据库，ldap目录存储，nis等

提供账号和密码存储（文本文件）

使用专用命令完成此类文件的创建及用户管理
htpasswd [options] /PATH/HTTPD_PASSWD_FILE username
-c 自动创建文件，仅应该在文件不存在时使用
-p 明文密码
-d CRYPT格式加密，默认
-m md5格式加密
-s sha格式加密
-D 删除指定用户，或直接删除文件
-b 使用命令行直接添加密码

构建实验

[root@centos7-7 ~]#vim /etc/httpd/conf/httpd.conf
...
# Further relax access to the default document root:
<Directory "/var/www/html">
    #
    # Possible values for the Options directive are "None", "All",
    # or any combination of:
    #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
    #
    # Note that "MultiViews" must be named *explicitly* --- "Options All"
    # doesn't give it to you.
    #
    # The Options directive is both complicated and important.  Please see
    # http://httpd.apache.org/docs/2.4/mod/core.html#options
    # for more information.
    #
    Options none    （none为/var/www/html/下，无index.html文件则拒绝访问）

    #
    # AllowOverride controls what directives may be placed in .htaccess files.
    # It can be "All", "None", or any combination of the keywords:
    #   Options FileInfo AuthConfig Limit
    #
    AllowOverride None

    #
    # Controls who can get stuff from this server.
    #
    Require all granted
<Directory "/var/www/html/admin">
    Options Indexes
    AllowOverride none
    AuthType basic
    AuthName "some private area..."
    AuthUserFile "/etc/httpd/conf/.htpasswd"
    Require user tom 
</Directory>
...
[root@centos7-7 ~]#htpasswd -b -c -m /etc/httpd/conf/.htpasswd tom dushan 创建tom用户设置密码dushan
Adding password for user tom
[root@centos7-7 ~]#htpasswd -b -m /etc/httpd/conf/.htpasswd jerry shandu 第二次注意不需添加-c选项
Adding password for user jerry
[root@centos7-7 ~]#tail /etc/httpd/conf/.htpasswd                         
tom:$apr1$aX9.XL42$dzjpLk5MB5ivprfjiY/1D0
jerry:$apr1$E21f3YMg$TTaviG84A8bzaQXxwsGK01
[root@centos7-7 ~]#cd /var/www/html/
[root@centos7-7 html]#mkdir admin
[root@centos7-7 html]#cp index.html.origin /var/www/html/admin/admin.html

浏览器浏览http://192.168.32.7/admin/admin.html输入用户名及密码即可访问

六、定义路径别名

访问不是DocumentRoot子路径下的html页面则需设置别名

[root@centos7-7 ~]#cd /app
[root@centos7-7 app]#cp /var/www/html/index.html /app/biemiing/
[root@centos7-7 bbs]#cat >index.html<<EOF 
> This is /app/bieming/index.html !!!
> EOF
[root@centos7-7 bbs]#vim /etc/httpd/conf/httpd.conf
...
Alias /bieming/ /app/bieming/
    <Directory "/app/bieming/">
        Options none
        AllowOverride none
        Require all granted
    </Directory>
...
[root@centos7-7 ~]#httpd -t
Syntax OK
[root@centos7-7 ~]#systemctl restart httpd

浏览器访问http://192.168.32.7/bieming/ 显示/app/bieming/index.html内容及成功

注意：/var/www/html路径下（document路径下若文件夹有和Alias重名的，优先显示Alias页面）

七、日志文件

/var/log/httpd/access_log

访问日志

[root@centos7-7 ~]#tail /var/log/httpd/access_log
···
192.168.32.1 - - [18/Oct/2018:07:03:00 +0800] "GET /bbs/ HTTP/1.1" 304 - "-" "Mozilla/5.0 (Windows NT 10.0; Win64; 
         1                    2                          3          4  5  6          7
···
1.哪个客户端
2.时间
3.请求报文的起始行（方法:GET，请求/bbs/这个URL，基于hTTP/1.1版本）
4.响应码
5.响应内容长度
6.表示从什么位置跳转来的
7.用户代理

/var/log/httpd/error_log

错误日志

[root@centos7-7 ~]#tail /var/log/httpd/error_log
···
[Thu Oct 18 07:00:24.356714 2018] [lbmethod_heartbeat:notice] [pid 4114] AH02282: No slotmem from mod_heartmonitor
          1                             2                        3                     4
···
1.时间
2.加载的模块
3.进程
4.哪里出的问题

定义日志格式：LogFormat format strings

LogFormat "%h %l %u %{%Y-%m-%d %H:%M:%S}t \"%r\" %>s %b
\"%{Referer}i\" \"%{User-Agent}i\"" testlog
•使用日志格式：
CustomLog logs/access_log testlog

参考帮助：http://httpd.apache.org/docs/2.2/mod/mod_log_config.html#formats

•%h 客户端IP地址
•%l 远程用户,启用mod_ident才有效，通常为减号“-”
•%u 验证（basic，digest）远程用户,非登录访问时，为一个减号“-”
•%t 服务器收到请求时的时间
•%r First line of request，即表示请求报文的首行；记录了此次请求的“
方法”，“URL”以及协议版本
•%>s 响应状态码
•%b 响应报文的大小，单位是字节；不包括响应报文http首部
•%{Referer}i 请求报文中首部“referer”的值；即从哪个页面中的超链
接跳转至当前页面的
•%{User-Agent}i 请求报文中首部“User-Agent”的值；即发出请求的
应用程序,浏览器型号

[root@centos7-7 ~]#vim /etc/httpd/conf/httpd.conf
<IfModule log_config_module>
    #
    # The following directives define some format nicknames for use with
    # a CustomLog directive (see below).
    #
    LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined    系统第一种格式 ,需引号注意转译\
    LogFormat "%h %l %u %t \"%r\" %>s %b" common                                         系统第二种格式 

    <IfModule logio_module>
      # You need to enable mod_logio.c to use %I and %O
      LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio
    </IfModule>

    #
    # The location and format of the access logfile (Common Logfile Format).
    # If you do not define any access logfiles within a <VirtualHost>
    # container, they will be logged here.  Contrariwise, if you *do*
    # define per-<VirtualHost> access logfiles, transactions will be
    # logged therein and *not* in this file.
    #
    #CustomLog "logs/access_log" common                  （两种格式可切换）

    #
    # If you prefer a logfile with access, agent, and referer information
    # (Combined Logfile Format) you can use the following directive.
    #
    CustomLog "logs/access_log" combined                 （默认启用）
</IfModule>
...

# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here.  If you *do* define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
#
ErrorLog "logs/error_log"                            错误日志路径

#
# LogLevel: Control the number of messages logged to the error_log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
#
LogLevel warn                                        错误日志级别

八、虚拟主机

站点标识： socket
IP相同，但端口不同
IP不同，但端口均为默认端口
FQDN不同：请求报文中首部 Host: www.baidu.com
有三种实现方案：
基于ip：为每个虚拟主机准备至少一个ip地址
基于port：为每个虚拟主机使用至少一个独立的port
基于FQDN：为每个虚拟主机使用至少一个FQDN

!!!注意：一般虚拟机不要与main主机混用；因此，要使用虚拟主机，
一般先禁用main主机
禁用方法：注释中心主机的DocumentRoot指令即可!!!

虚拟主机的配置方法：

<VirtualHost IP:PORT>
ServerName FQDN
DocumentRoot “/path"
</VirtualHost>
建议：上述配置存放在独立的配置文件中  /etc/httpd/conf.d/子配置文件中
•其它可用指令：
ServerAlias：虚拟主机的别名；可多次使用
ErrorLog： 错误日志
CustomLog：访问日志
<Directory “/path"> 
</Directory>
Alias

基于IP的虚拟主机示例：

<VirtualHost 172.16.100.6:80>
ServerName www.a.com
DocumentRoot "/www/a.com/htdocs"
</VirtualHost>
<VirtualHost 172.16.100.7:80>
ServerName www.b.net
DocumentRoot "/www/b.net/htdocs"
</VirtualHost>
<VirtualHost 172.16.100.8:80>
ServerName www.c.org
DocumentRoot "/www/c.org/htdocs"
</VirtualHost>

基于端口的虚拟主机：可和基于IP的虚拟主机混和使用

listen 808
listen 8080
<VirtualHost 172.16.100.6:80>
ServerName www.a.com
DocumentRoot "/www/a.com/htdocs"
</VirtualHost>
<VirtualHost 172.16.100.6:808>
ServerName www.b.net
DocumentRoot "/www/b.net/htdocs"
</VirtualHost>
<VirtualHost 172.16.100.6:8080>
ServerName www.c.org
DocumentRoot "/www/c.org/htdocs"
</VirtualHost>

基于FQDN的虚拟主机：http2.2版本需添加一句 NameVirtualHost *:80

NameVirtualHost *:80 httpd2.4不需要此指令
<VirtualHost *:80>
ServerName www.a.com
DocumentRoot "/www/a.com/htdocs"
</VirtualHost>
<VirtualHost *:80>
ServerName www.b.net
DocumentRoot "/www/b.net/htdocs"
</VirtualHost>
<VirtualHost *:80>
ServerName www.c.org
DocumentRoot "/www/c.org/htdocs"
</VirtualHost>

构建实验

[root@centos7-7 ~]#cd /etc/httpd
[root@centos7-7 httpd]#ls
conf  conf.d  conf.modules.d  logs  modules  run
[root@centos7-7 httpd]#vim conf.d/www.conf   
<VirtualHost 192.168.32.7:80>
    ServerName www.dushan.com
    DocumentRoot "/vhosts/www/htdocs"
        <Direcotry "/vhosts/www/htdocs">
                Options none
                AllowOverride none
                Require all Granted
        </Directory>
                ErrorLog "/vhosts/logs/www_access_log"
                CustomLog "/vhosts/logs/www_error_log" combined
</VirtualHost>
[root@centos7-7 httpd]#cp conf.d/www.conf conf.d/bbs.conf
[root@centos7-7 httpd]#vim conf.d/bbs.conf 
<VirtualHost 192.168.32.77:80>
    ServerName bbs.dushan.com
    DocumentRoot "/vhosts/bbs/htdocs"
        <Direcotry "/vhosts/bbs/htdocs">
                Options none
                AllowOverride none
                Require all Granted
        </Directory>
                CustomLog "/vhosts/logs/bbs_error_log" combined(指定格式）
                ErrorLog "/vhosts/logs/bbs_access_log" 
</VirtualHost>
[root@centos7-7 httpd]#mkdir -pv /vhosts/{www,bbs}/htdocs  /vhosts/logs
[root@centos7-7 httpd]#vim /vhosts/bbs/htdocs/index.html
/vhost/bbs/htdocs/index.html
[root@centos7-7 httpd]#vim /vhosts/www/htdocs/index.html 
/vhosts/www/htdocs/index.html
[root@centos7-7 httpd]#ifconfig eth0:1 192.168.32.77/24 up
[root@centos7-7 httpd]#systemctl restart httpd

构建实验（只够一个ip地址都使用80端口时，名字至关重要，不一样就可以）

[root@centos7-7 httpd]#vim conf.d/www.conf 
<VirtualHost *:80>
    ServerName www.dushan.com           使用名字到达
    ServerAlias wwws.dushan.com         也可设置别名，这样两个名字都可
    DocumentRoot "/vhosts/www/htdocs"
        <Direcotry "/vhosts/www/htdocs">
                Options none
                AllowOverride none
                Require all Granted
        </Directory>
                CustomLog "/vhosts/logs/www_error_log" combined(指定格式）
                ErrorLog "/vhosts/logs/www_access_log" 
</VirtualHost>

[root@centos7-7 httpd]#vim conf.d/bbs.conf 
<VirtualHost *:80>
    ServerName bbs.dushan.com           设置名字
    DocumentRoot "/vhosts/bbs/htdocs"
        <Direcotry "/vhosts/bbs/htdocs">
                Options none
                AllowOverride none
                Require all Granted
        </Directory>
                CustomLog "/vhosts/logs/bbs_error_log" combined(指定格式）
                ErrorLog "/vhosts/logs/bbs_access_log" 
[root@centos7-7 ~]#vim /etc/hosts
192.168.32.7   www.dushan.com wwws.dushan.com bbs.dushan.com

九、keepAlive 保持持久连接，以满足上百个资源加载时提升性能

服务器负载很轻时可打开，服务器负载较重时注意关闭。
KeepAlive on下包含两个方面：
1、KeepAliveTimeout #ms 保持连接超时时长
2、MaxKeepAliveRequests 100 最大并发请求数量
两者同时生效，哪个先到达，遵循哪个

[root@centos7-7 ~]# vim /etc/httpd/conf/httpd.conf
...
KeepAlive on
KeepAlive Timeout 10s
MaxKeepAliveRequests 100
[root@centos7-7 ~]#httpd -t
Syntax OK
[root@centos7-7 ~]#!sys
systemctl restart httpd

十、mod_deflate 模块

1、使用mod_deflate模块压缩页面优化传输速度
2、适用场景：
(1) 节约带宽，额外消耗CPU；同时，可能有些较老浏览器不支持。
(2) 压缩适于压缩的资源，例如文本文件

LoadModule deflate_module modules/mod_deflate.so 装载模块
SetOutputFilter DEFLATE                          利用过滤器指定哪些类型
类型：
# Restrict compression to these MIME types            
AddOutputFilterByType DEFLATE text/plain
AddOutputFilterByType DEFLATE text/html
AddOutputFilterByType DEFLATE application/xhtml+xml
AddOutputFilterByType DEFLATE text/xml
AddOutputFilterByType DEFLATE application/xml
AddOutputFilterByType DEFLATE application/x-javascript
AddOutputFilterByType DEFLATE text/javascript
AddOutputFilterByType DEFLATE text/css

3、Level of compression (Highest 9 - Lowest 1) 设定压缩比
DeflateCompressionLevel 9 指定命令

4、排除特定旧版本的浏览器，不支持压缩
1)Netscape 4.x 只压缩text/html

BrowserMatch ^Mozilla/4 gzip-only-text/html

2)Netscape 4.06-08三个版本不压缩

BrowserMatch ^Mozilla/4\.0[678] no-gzip

3)Internet Explorer标识本身为“Mozilla / 4”，但实际上是能够处理请求的压缩。
如果用户代理首部匹配字符串“MSIE”（“B”为单词边界”），就关闭之前定
义的限制

BrowserMatch \bMSI[E] !no-gzip !gzip-only-text/html

实验环境

[root@centos7-7 ~]#httpd -M |grep deflate   查看是否加载
 deflate_module (shared)
[root@centos7-7 ~]#vim /etc/httpd/conf.d/deflate.conf
SetOutputFilter DEFLATE
# Restrict compression to these MIME types            
AddOutputFilterByType DEFLATE text/plain
AddOutputFilterByType DEFLATE text/html
AddOutputFilterByType DEFLATE application/xhtml+xml
AddOutputFilterByType DEFLATE text/xml
AddOutputFilterByType DEFLATE application/xml
AddOutputFilterByType DEFLATE application/x-javascript
AddOutputFilterByType DEFLATE text/javascript
AddOutputFilterByType DEFLATE text/css
DeflateCompressionLevel 6
BrowserMatch ^Mozilla/4 gzip-only-text/html
BrowserMatch ^Mozilla/4\.0[678] no-gzip
BrowserMatch \bMSI[E] !no-gzip !gzip-only-text/html
[root@centos7-7 ~]#httpd -t
Syntax OK
[root@centos7-7 ~]#!sys
systemctl restart httpd
[root@centos7-7 ~]#cp /var/log/messages /var/www/html/
admin/             index.html         index.html.origin  
[root@centos7-7 ~]#cp /var/log/messages /var/www/html/index.html
cp: overwrite ‘/var/www/html/index.html’? y
[root@centos7-7 ~]#ll /var/www/html/
total 1296
drwxr-xr-x 2 root root      24 Oct 19 12:33 admin
-rw-r--r-- 1 root root 1321814 Oct 19 22:03 index.html  注意权限，若无读权限则apache用户无法访问chmod +r /var/www/html/index.html

十一、https

1、https：http over ssl 基于ssl的http

2、SSL会话的简化过程

(1) 客户端发送可供选择的加密方式，并向服务器请求证书
(2) 服务器端发送证书以及选定的加密方式给客户端
(3) 客户端取得证书并进行证书验证
如果信任给其发证书的CA
(a) 验证证书来源的合法性；用CA的公钥解密证书上数字签名
(b) 验证证书的内容的合法性：完整性验证
(c) 检查证书的有效期限
(d) 检查证书是否被吊销
(e) 证书中拥有者的名字，与访问的目标主机要一致
(4) 客户端生成临时会话密钥（对称密钥），并使用服务器端的公钥加密此数据发送给服务器，完
成密钥交换
(5) 服务用此密钥加密用户请求的资源，响应给客户端
• 注意：SSL是基于IP地址实现,单IP的主机仅可以使用一个https虚拟主机

3、https实现

• (1) 为服务器申请数字证书
测试：通过私建CA发证书
(a) 创建私有CA
(b) 在服务器创建证书签署请求
(c) CA签证
• (2) 配置httpd支持使用ssl，及使用的证书
yum -y install mod_ssl
配置文件：/etc/httpd/conf.d/ssl.conf
DocumentRoot
ServerName
SSLCertificateFile
SSLCertificateKeyFile
• (3) 测试基于https访问相应的主机
openssl s_client [-connect host:port] [-cert filename] [-CApath directory] [-CAfile filename]

实验环境，直接生成一个秘钥举例

[root@centos7-7 ~]#cd /etc/httpd
[root@centos7-7 httpd]#ls
conf  conf.d  conf.modules.d  logs  modules  run
[root@centos7-7 httpd]#mkdir ssl
[root@centos7-7 httpd]#cd ssl/
[root@centos7-7 ssl]#(umask 077; openssl genrsa -out httpd.key 2048)
Generating RSA private key, 2048 bit long modulus
......................................................................................................................+++
..................................+++
e is 65537 (0x10001)
[root@centos7-7 ssl]#ll
total 4
-rw------- 1 root root 1675 Oct 19 22:25 httpd.key
[root@centos7-7 ssl]#openssl req -new -x509 -key ./httpd.key -out httpd.crt -subj "/CN=www.dushan.com/0=dushan" -days 3650
[root@centos7-7 ssl]#yum install mod_ssl
[root@centos7-7 ssl]#cd /etc/httpd/conf.d/
[root@centos7-7 conf.d]#vim ssl.conf 
#   Server Certificate:
# Point SSLCertificateFile at a PEM encoded certificate.  If
# the certificate is encrypted, then you will be prompted for a
# pass phrase.  Note that a kill -HUP will prompt again.  A new
# certificate can be generated using the genkey(1) command.
SSLCertificateFile /etc/httpd/ssl/httpd.crt             更改路径

#   Server Private Key:
#   If the key is not combined with the certificate, use this
#   directive to point at the key file.  Keep in mind that if
#   you've both a RSA and a DSA private key you can configure
#   both in parallel (to also allow the use of DSA ciphers, etc.)
SSLCertificateKeyFile /etc/httpd/ssl/httpd.key          更改路径

十二、http重定向https

将http请求转发至https的URL

重定向
Redirect [status] URL-path URL
status状态：

• Permanent：返回永久重定向状态码 301

• Temp：返回临时重定向状态码302. 此为默认值

添加至配置文件结尾即可：
vim /etc/httpd/conf/httpd.conf 或 /etc/httpd/conf.d/*.conf 
Redirect temp / https://www.dushan.com/

杜达达

关注

2
点赞
踩
9

收藏

觉得还不错? 一键收藏
0
评论
复制链接

分享到 QQ

分享到新浪微博

扫一扫

专栏目录