ESP8266_RTOS_SDK-2.0.0配置sta模式代码

/*
 * ESPRSSIF MIT License
 *
 * Copyright (c) 2015 <ESPRESSIF SYSTEMS (SHANGHAI) PTE LTD>
 *
 * Permission is hereby granted for use on ESPRESSIF SYSTEMS ESP8266 only, in which case,
 * it is free of charge, to any person obtaining a copy of this software and associated
 * documentation files (the "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the Software is furnished
 * to do so, subject to the following conditions:
 * 
 * The above copyright notice and this permission notice shall be included in all copies or
 * substantial portions of the Software.
 * 
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS
 * FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR
 * COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER
 * IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 */

#include "esp_common.h"

#include "freertos/FreeRTOS.h"
#include "freertos/task.h"

#include "lwip/sockets.h"
#include "lwip/dns.h"
#include "lwip/netdb.h"
#include "espressif/espconn.h"
#include "espressif/airkiss.h"

#define DEMO_AP_SSID "n22s-mobile3"
#define DEMO_AP_PASSWORD "1t3f5s7e9O"

void lt_delay_ms(int ms);

void ICACHE_FLASH_ATTR
main_lt_task(void *pvParameters)
{
  //  smartconfig_start(smartconfig_done);
    vTaskDelete(NULL);
}

/******************************************************************************
 * FunctionName : user_rf_cal_sector_set
 * Description  : SDK just reversed 4 sectors, used for rf init data and paramters.
 *                We add this function to force users to set rf cal sector, since
 *                we don't know which sector is free in user's application.
 *                sector map for last several sectors : ABCCC
 *                A : rf cal
 *                B : rf init data
 *                C : sdk parameters
 * Parameters   : none
 * Returns      : rf cal sector
*******************************************************************************/
uint32 user_rf_cal_sector_set(void)
{
    flash_size_map size_map = system_get_flash_size_map();
    uint32 rf_cal_sec = 0;

    switch (size_map) {
        case FLASH_SIZE_4M_MAP_256_256:
            rf_cal_sec = 128 - 5;
            break;

        case FLASH_SIZE_8M_MAP_512_512:
            rf_cal_sec = 256 - 5;
            break;

        case FLASH_SIZE_16M_MAP_512_512:
        case FLASH_SIZE_16M_MAP_1024_1024:
            rf_cal_sec = 512 - 5;
            break;

        case FLASH_SIZE_32M_MAP_512_512:
        case FLASH_SIZE_32M_MAP_1024_1024:
            rf_cal_sec = 1024 - 5;
            break;
        case FLASH_SIZE_64M_MAP_1024_1024:
            rf_cal_sec = 2048 - 5;
            break;
        case FLASH_SIZE_128M_MAP_1024_1024:
            rf_cal_sec = 4096 - 5;
            break;
        default:
            rf_cal_sec = 0;
            break;
    }

    return rf_cal_sec;
}

/******************************************************************************
 * FunctionName : user_init
 * Description  : entry of user application, init user function here
 * Parameters   : none
 * Returns      : none
*******************************************************************************/
void ICACHE_FLASH_ATTR
user_init(void)
{
	printf("SDK version:%s\n", system_get_sdk_version());
	uart_div_modify(0, UART_CLK_FREQ / (115200));
	SET_PERI_REG_MASK(UART_CONF0(0), UART_RXFIFO_RST | UART_TXFIFO_RST);
	CLEAR_PERI_REG_MASK(UART_CONF0(0), UART_RXFIFO_RST | UART_TXFIFO_RST);
	/* need to set opmode before you set config */

	wifi_set_opmode(STATION_MODE);
	struct station_config* config = (struct station_config *)zalloc(sizeof(struct station_config));
	config->bssid_set = 0;
	sprintf(config->ssid, DEMO_AP_SSID);
	sprintf(config->password, DEMO_AP_PASSWORD);
	wifi_station_set_config(config);
	free(config);
	wifi_station_connect();

    xTaskCreate(main_lt_task, "main_lt_task", 8096, NULL, 2, NULL);
//	xTaskCreate(main_lt_task, "main_lt_task", 16192, NULL, 2, NULL);
}

void lt_delay_ms(int ms)
{
	vTaskDelay(ms / portTICK_RATE_MS);
}