以下是
思科、
华为、新
华三、
锐捷交换机的
命令大全：
思科交换机命令：
1.
配置主机名：hostname <name>
2.
配置接口VLAN：interface <interface type><interface number>，switch
port mode access，switch
port access vlan <vlan ID>
3.
配置Trunk口：interface <interface type><interface number>，switch
port mode trunk，switch
port trunk allowed vlan <vlan ID>
4.
配置默认网关：ip default-gateway <ip address>
5.
配置静态路由：ip route <destination network> <subnet mask> <next hop address>
6.
配置Telnet：line vty <line number>，password <password>，login
7.
配置SSH：ip ssh version <version>，crypto key generate rsa
8.
配置ACL：access-list <number> per
mit/deny <protocol> <source address> <wildcard mask> [<destination address> <wildcard mask> <operator> <
port>]
9.
配置STP：spann
ing-tree mode <mode>，spann
ing-tree vlan <vlan ID> root primary/secondary，spann
ing-tree
portfast
华为交换机命令：
1.
配置主机名：sysname <name>
2.
配置接口VLAN：interface <interface type><interface number>，
port link-type access，
port default vlan <vlan ID>
3.
配置Trunk口：interface <interface type><interface number>，
port link-type trunk，
port trunk allow-pass vlan <vlan ID>
4.
配置默认网关：ip route-static 0.0.0.0 0.0.0.0 <next hop address>
5.
配置静态路由：ip route-static <destination network> <subnet mask> <next hop address>
6.
配置Telnet：user-interface vty <line number>，authentication-mode password，set authentication password cipher <password>
7.
配置SSH：ssh server enable，user-interface vty <line number>，authentication-mode aaa，protocol inbound ssh，user privilege level 3
8.
配置ACL：acl number <number>，rule <rule number> per
mit/deny <protocol> source <source address> <wildcard mask> destination <destination address> <wildcard mask> [destination-
port <
port>]
9.
配置STP：stp mode <mode>，stp priority <priority>，stp enable
新
华三交换机命令：
1.
配置主机名：sysname <name>
2.
配置接口VLAN：interface <interface type><interface number>，
port link-type access，
port default vlan <vlan ID>
3.
配置Trunk口：interface <interface type><interface number>，
port link-type trunk，
port trunk allow-pass vlan <vlan ID>
4.
配置默认网关：ip route-static 0.0.0.0 0.0.0.0 <next hop address>
5.
配置静态路由：ip route-static <destination network> <subnet mask> <next hop address>
6.
配置Telnet：user-interface vty <line number>，authentication-mode password，set authentication password cipher <password>
7.
配置SSH：ssh server enable，user-interface vty <line number>，authentication-mode aaa，protocol inbound ssh，user privilege level 3
8.
配置ACL：acl number <number>，rule <rule number> per
mit/deny <protocol> source <source address> <wildcard mask> destination <destination address> <wildcard mask> [destination-
port <
port>]
9.
配置STP：stp mode <mode>，stp priority <priority>，stp enable
锐捷交换机命令：
1.
配置主机名：system name <name>
2.
配置接口VLAN：interface <interface type><interface number>，
port link-type access，
port default vlan <vlan ID>
3.
配置Trunk口：interface <interface type><interface number>，
port link-type trunk，
port trunk allow-pass vlan <vlan ID>
4.
配置默认网关：ip route-static 0.0.0.0 0.0.0.0 <next hop address>
5.
配置静态路由：ip route <destination network> <subnet mask> <next hop address>
6.
配置Telnet：user-interface vty <line number>，authentication-mode password，set authentication password cipher <password>
7.
配置SSH：ssh server enable，user-interface vty <line number>，authentication-mode aaa，protocol inbound ssh，user privilege level 3
8.
配置ACL：acl number <number>，rule <rule number> per
mit/deny <protocol> source <source address> <wildcard mask> destination <destination address> <wildcard mask> [destination-
port <
port>]
9.
配置STP：stp enable，stp force-version <version>，stp priority <priority>
最低0.47元/天 解锁文章
1122
被折叠的 条评论
为什么被折叠?
到【灌水乐园】发言
