linux内核出问题无法启动,内核移植出问题了 +LCD内核就无法启动

内核移植出问题了 +LCD内核就无法启动

发布时间:2008-08-11 14:41:37来源:红联作者:sxd1984

自己从网上下了个2.6.14的内核，安装网上一般的方法都配置好了，编译也通过了，但启动到一般就停止了，找了以后发现是LCD的问题，把menuconfig里面的LCD去掉，或则把自己加的LCD初始化代码去掉，都可以启动内核，编译和LCD出事化代码应该是正确的，就是启动不了 啊。

vivi> load flash kernel x

Ready for downloading using xmodem...

Waiting...

.Downloaded file at 0x30000000, size = 1044864 bytes

Found block size = 0x00100000

Erasing... ... done

Writing... ... done

Written 1044864 bytes

vivi> boot

Copy linux kernel from 0x00030000 to 0x30008000, size = 0x001d0000 ... done

zImage magic = 0x016f2818

Setup linux parameters at 0x30000100

linux command line is: "noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttyS"MACH_TYPE = 193

NOW, Booting Linux......

Uncompressing Linux.............................................................Linux version 2.6.14 (root@localhost.localdomain) (gcc version 3.4.1) #8 Sun Au8CPU: ARM920Tid(wb) [41129200] revision 0 (ARMv4T)

Machine: SMDK2410

ATAG_INITRD is deprecated; please update your bootloader.

Memory policy: ECC disabled, Data cache writeback

CPU S3C2410A (id 0x32410002)

S3C2410: core 200.000 MHz, memory 100.000 MHz, peripheral 50.000 MHz

S3C2410 Clocks, (c) 2004 Simtec Electronics

CLOCK: Slow mode (1.500 MHz), fast, MPLL on, UPLL on

CPU0: D VIVT write-back cache

CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets

Built 1 zonelists

Kernel command line: noinitrd root=/dev/mtdblock3 init=/linuxrc console=ttySAC00irq: clearing subpending status 00000007

irq: clearing subpending status 00000002

PID hash table entries: 512 (order: 9, 8192 bytes)

timer tcon=00000000, tcnt a2c1, tcfg 00000200,00000000, usec 00001eb8

Console: colour dummy device 80x30

Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)

Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)

Memory: 64MB = 64MB total

Memory: 62592KB available (1730K code, 347K data, 100K init)

Mount-cache hash table entries: 512

CPU: Testing write buffer coherency: ok

softlockup thread 0 started up.

NET: Registered protocol family 16

Now you use L35T32(320x240) to display!

S3C2410: Initialising architecture

S3C2410 DMA Driver, (c) 2003-2004 Simtec Electronics

DMA channel 0 at c4800000, irq 33

DMA channel 1 at c4800040, irq 34

DMA channel 2 at c4800080, irq 35

DMA channel 3 at c48000c0, irq 36

NetWinder Floating Point Emulator V0.97 (double precision)

devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

yaffs Aug 10 2008 10:58:26 Installing.

就在这停止了