linux驱动开发机环境,从零开始搭建Linux驱动开发环境

a device is added or removed so that the device node can be created or destroyed. Then you [3] seed /dev with all the device nodes that were created while the system was booting.

For the "full" setup, you want to [4] make sure /dev is a tmpfs filesystem (assuming you're running out of flash). Then you want to [5] create the

/dev/pts mount point and finally [6] mount the devpts filesystem on it.

当我们在flash中使用使，则只需要前面[1][2][3]步就行了。即

[1] mount -t sysfs sysfs /sys

[2] echo /bin/mdev > /proc/sys/kernel/hotplug

[3] mdev -s

于是我们在etc/init.d/rcS文件改为

mount –a

echo /bin/mdev > /proc/sys/kernel/hotplug

mdev -s

将ect/fstab文件改为

# device mount-point type options dump fsck order

proc /proc proc defaults 0 0

sysfs /sys sysfs defaults 0 0

再在root_fs下新建一个sys目录。