linux version 2.4.18-rmk7-pxa1,板子问题请教，请各位帮忙看看，谢谢

我今天收到板子了，连接串口，上电源。

LED1 ~ LED5都亮了，然后LED1，LED5常亮，5秒以后，LED2熄灭，LED3闪烁三次后熄灭。LED4一直闪烁。

同时，超级终端返回的信息是：

VIVI version 0.1.4 (root@eady.mizi.com) (gcc version 2.95.3 19991030 (prerelease

)) #0.1.4 Tue Jul 6 19:10:29 KST 2004

MMU table base address = 0x33DFC000

Succeed memory mapping.

NAND device: Manufacture ID: 0xec, Chip ID: 0x76 (Samsung K9D1208V0M)

Found saved vivi parameters.

Press Return to start the LINUX now, any other key for vivi

Copy linux kernel from 0x00030000 to 0x30008000, size = 0x000c0000 ... done

zImage magic = 0x016f2818

Setup linux parameters at 0x30000100

linux command line is: "noinitrd root="/dev/bon/2" init="/linuxrc" console="ttyS0""

MACH_TYPE = 193

NOW, Booting Linux......

Uncompressing Linux.................................................... done, bo

oting the kernel.

Linux version 2.4.18-rmk7-pxa1 (eady@eady.mizi.com) (gcc version 2.95.2 20000516

?(release) [Rebel.com]) #3 岿 7岿 5 14:39:23 KST 2004

CPU: ARM/CIRRUS Arm920Tsid(wb) revision 0

Machine: Samsung-SMDK2410

On node 0 totalpages: 16384

zone(0): 16384 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: noinitrd root="/dev/bon/2" init="/linuxrc" console="ttyS0"

DEBUG: timer count 15626

Console: colour dummy device 80x30

Calibrating delay loop... 99.94 BogoMIPS

Memory: 64MB = 64MB total

Memory: 62704KB available (1396K code, 306K data, 60K init)

Dentry-cache hash table entries: 8192 (order: 4, 65536 bytes)

Inode-cache hash table entries: 4096 (order: 3, 32768 bytes)

Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)

Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)

Page-cache hash table entries: 16384 (order: 4, 65536 bytes)

POSIX conformance testing by UNIFIX

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

CPU clock = 200.000 Mhz, HCLK = 100.000 Mhz, PCLK = 50.000 Mhz

Starting kswapd

devfs: v1.10 (20020120) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications

?AB.

ttyS%d0 at I/O 0x50000000 (irq = 52) is a S3C2410

ttyS%d1 at I/O 0x50004000 (irq = 55) is a S3C2410

ttyS%d2 at I/O 0x50008000 (irq = 58) is a S3C2410

Console: switching to colour frame buffer device 30x40

Installed S3C2410 frame buffer

pty: 256 Unix98 ptys configured

s3c2410-ts initialized

S3C2410 Real Time Clock Driver v0.1

block: 128 slots per queue, batch="32"

eth0: cs8900 rev K(3.3 Volts) found at 0xd0000300

cs89x0 media RJ-45, IRQ 37

NAND device: Manufacturer ID: 0xec, Chip ID: 0x76 (Samsung NAND 64MiB 3,3V)

bon0: 00000000-00030000 (00030000) 00000000

bon1: 00030000-00100000 (000d0000) 00000000

bon2: 00100000-03ff8000 (03ef8000) 00000000

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 4096 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com

VFS: Mounted root (cramfs filesystem).

Mounted devfs on /dev

Freeing init memory: 60K

mount /etc as ramfs

re-create the /etc/mtab entries

console=/dev/co顂ole

init started:? BusyBox v0.60.3 (2002.05.13-08:36+0000) multi-c鵯l binary

Starting pid 16, console /dev/console: '/etc/init.d/rcS'

exec: /usr/etc/rc.local: No such file or dire鹴ory

Waiting for enter to start '/bin/sh' (pid 19, terminal /dev/console)

Please press Enter to activate this console.

光标一直停在sonsole单词的后面，按了回车键也没有用，也不能输入任何字符。

没有办法输入阿南说的ls这个linux命令，请哪位兄弟帮帮忙分析一下，这个是什么原因。谢谢