求助:USB无法识别
发布时间:2010-09-26 21:15:32来源:红联作者:caoyu1099
#dmesg 如下:
usb 2-2: new high speed USB device using ehci_hcd and address 4
ehci_hcd 0000:00:1d.7: port 2 reset error -110
hub 2-0:1.0: hub_port_status failed (err = -32)
hub 2-0:1.0: unable to enumerate USB device on port 2
usb 6-2: new full speed USB device using uhci_hcd and address 2
usb 6-2: New USB device found, idVendor=1234, idProduct=5678
usb 6-2: New USB device strings: Mfr=16, Product=32, SerialNumber=96
usb 6-2: Product: FUSB200
usb 6-2: Manufacturer: GENERIC INC.
usb 6-2: SerialNumber: 01234567890C
usb 6-2: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi4 : SCSI emulation for USB Mass Storage devices
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usbtouchscreen
usb-storage: device scan complete
scsi 4:0:0:0: Direct-Access Generic Audio Product v2.0 PQ: 0 ANSI: 2
sd 4:0:0:0: Attached scsi generic sg2 type 0
sd 4:0:0:0: [sdb] 8388352 512-byte logical blocks: (4.29 GB/3.99 GiB)
sd 4:0:0:0: [sdb] Write Protect is off
sd 4:0:0:0: [sdb] Mode Sense: 20 00 00 00
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sdb:
sd 4:0:0:0: [sdb] Assuming drive cache: write through
sd 4:0:0:0: [sdb] Attached SCSI removable disk
usb 6-2: reset full speed USB device using uhci_hcd and address 2
usb 6-2: device descriptor read/64, error -110
不知是何原因,还请帮忙解决。
系统:fedora 12 x86_64 usb设备:4G.