imx6 linux编译,IMX6学习记录(3)-LINUX编译

上面是我创建的群聊，欢迎新朋友的加入。

目录

1.获取官方kernel

2.编译内核

3.内核烧录

4.调整uboot

5.卡分区

1.获取官方kernel

地址：http://git.freescale.com/git/cgit.cgi/imx/linux-imx.git/tag/?h=imx_4.1.15_2.0.0_ga&id=rel_imx_4.1.15_2.1.0_ga

拉到最后，先把源码搞下来

2.编译内核

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- distclean

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- imx_v7_defconfig

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- menuconfig

make ARCH=arm CROSS_COMPILE=arm-linux-gnueabihf- all -j4

不知道怎么回事，上来编译就报错了

jun@ubuntu:~/i.mx6/source/linux$ make clean

./scripts/gcc-goto.sh: 行 4: $'\r': 未找到命令

./scripts/gcc-goto.sh: 行 21: 警告: 立即文档在第 5 行被文件结束符分隔 (需要 `END')

./scripts/gcc-version.sh: 行 11: $'\r': 未找到命令

./scripts/gcc-version.sh: 行 33: 语法错误: 未预期的文件结尾

/bin/sh: 1: [: -lt: unexpected operator

./scripts/gcc-version.sh: 行 11: $'\r': 未找到命令

./scripts/gcc-version.sh: 行 33: 语法错误: 未预期的文件结尾

/bin/sh: 1: [: -lt: unexpected operator

./scripts/link-vmlinux.sh: 行 27: $'\r': 未找到命令

: 无效选项link-vmlinux.sh: 第 29 行: set: -

set: 用法: set [--abefhkmnptuvxBCHP] [-o 选项名] [--] [参数 ...]

./scripts/link-vmlinux.sh: 行 30: $'\r': 未找到命令

./scripts/link-vmlinux.sh: 行 33: 未预期的符号 `$'\r'' 附近有语法错误

'/scripts/link-vmlinux.sh: 行 33: `info()

Makefile:1195: recipe for target 'vmlinuxclean' failed

make: *** [vmlinuxclean] Error 2

jun@ubuntu:~/i.mx6/source/linux$ ls -la

解决办法

sudo apt install dos2unix

dos2unix ./scripts/gcc-goto.sh

dos2unix ./scripts/gcc-version.sh

dos2unix ./scripts/link-vmlinux.sh

3.内核烧录

找到编译出来的文件

其中zimage就是内核固件，烧录的就是它，一个6M的文件

按照官方指导，通过DD烧录到SD卡

搞完内核。还有一个设备树也要捎进去

4.调整uboot

启动是启动了，但是这不是我刚刚编译出来的

将uboot的头文件按照烧录的地址设置启动位置

#define CONFIG_SYS_MMC_IMG_LOAD_PART1

#ifdef CONFIG_SYS_BOOT_NAND

#define CONFIG_MFG_NAND_PARTITION "mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),1m(misc),-(rootfs) "

#else

#define CONFIG_MFG_NAND_PARTITION ""

#endif

#define CONFIG_MFG_ENV_SETTINGS \

"mfgtool_args=setenv bootargs console=${console},${baudrate} " \

CONFIG_BOOTARGS_CMA_SIZE \

"rdinit=/linuxrc " \

"g_mass_storage.stall=0 g_mass_storage.removable=1 " \

"g_mass_storage.file=/fat g_mass_storage.ro=1 " \

"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\

"g_mass_storage.iSerialNumber=\"\" "\

CONFIG_MFG_NAND_PARTITION \

"clk_ignore_unused "\

"\0" \

"initrd_addr=0x83800000\0" \

"initrd_high=0xffffffff\0" \

"bootcmd_mfg=run mfgtool_args;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};\0" \

#if defined(CONFIG_SYS_BOOT_NAND)

#define CONFIG_EXTRA_ENV_SETTINGS \

CONFIG_MFG_ENV_SETTINGS \

"panel=TFT43AB\0" \

"fdt_addr=0x83000000\0" \

"fdt_high=0xffffffff\0" \

"console=ttymxc0\0" \

"bootargs=console=ttymxc0,115200 ubi.mtd=4 " \

"root=ubi0:rootfs rootfstype=ubifs " \

CONFIG_BOOTARGS_CMA_SIZE \

"mtdparts=gpmi-nand:64m(boot),16m(kernel),16m(dtb),1m(misc),-(rootfs)\0"\

"bootcmd=nand read ${loadaddr} 0x4000000 0x800000;"\

"nand read ${fdt_addr} 0x5000000 0x100000;"\

"bootz ${loadaddr} - ${fdt_addr}\0"

#else

#define CONFIG_EXTRA_ENV_SETTINGS \

CONFIG_MFG_ENV_SETTINGS \

"script=boot.scr\0" \

"image=zImage\0" \

"console=ttymxc0\0" \

"fdt_high=0xffffffff\0" \

"initrd_high=0xffffffff\0" \

"fdt_file=undefined\0" \

"fdt_addr=0x83000000\0" \

"boot_fdt=try\0" \

"ip_dyn=yes\0" \

"panel=TFT43AB\0" \

"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \

"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \

"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \

"mmcautodetect=yes\0" \

"mmcargs=setenv bootargs console=${console},${baudrate} " \

CONFIG_BOOTARGS_CMA_SIZE \

"root=${mmcroot}\0" \

"loadbootscript=" \

"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \

"bootscript=echo Running bootscript from mmc ...; " \

"source\0" \

"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \

"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \

"mmcboot=echo Booting from mmc ...; " \

"run mmcargs; " \

"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \

"if run loadfdt; then " \

"bootz ${loadaddr} - ${fdt_addr}; " \

"else " \

"if test ${boot_fdt} = try; then " \

"bootz; " \

"else " \

"echo WARN: Cannot load the DT; " \

"fi; " \

"fi; " \

"else " \

"bootz; " \

"fi;\0" \

"netargs=setenv bootargs console=${console},${baudrate} " \

CONFIG_BOOTARGS_CMA_SIZE \

"root=/dev/nfs " \

"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \

"netboot=echo Booting from net ...; " \

"run netargs; " \

"if test ${ip_dyn} = yes; then " \

"setenv get_cmd dhcp; " \

"else " \

"setenv get_cmd tftp; " \

"fi; " \

"${get_cmd} ${image}; " \

"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \

"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \

"bootz ${loadaddr} - ${fdt_addr}; " \

"else " \

"if test ${boot_fdt} = try; then " \

"bootz; " \

"else " \

"echo WARN: Cannot load the DT; " \

"fi; " \

"fi; " \

"else " \

"bootz; " \

"fi;\0" \

"findfdt="\

"if test $fdt_file = undefined; then " \

"if test $board_name = EVK && test $board_rev = 9X9; then " \

"setenv fdt_file imx6ull-9x9-evk.dtb; fi; " \

"if test $board_name = EVK && test $board_rev = 14X14; then " \

"setenv fdt_file imx6ull-14x14-evk.dtb; fi; " \

"if test $fdt_file = undefined; then " \

"echo WARNING: Could not determine dtb to use; fi; " \

"fi;\0" \

#define CONFIG_BOOTCOMMAND \

"run findfdt;" \

"mmc dev ${mmcdev};" \

"mmc dev ${mmcdev}; if mmc rescan; then " \

"if run loadbootscript; then " \

"run bootscript; " \

"else " \

"if run loadimage; then " \

"run mmcboot; " \

"else run netboot; " \

"fi; " \

"fi; " \

"else run netboot; fi"

#endif

现在还是没跑起来

将之前yocto的镜像下载一遍，替换掉uboot、zimage和设备树

现在是可以进linux的，但是没有正常跑起来，内核是今天编译出来的

5.卡分区

现在跑起来是因为我先下载了一个yocto出来的镜像，对卡进行了分区。

如果没得镜像，那这个uboot和kernel就不能正常用了

从SD卡读zimage和设备树是要文件系统的

尝试自行划分一个分区出来

首先对照官方出来的卡状态

98

总共两分区，按理说只要和这个分区一样，uboot就可以找到内核镜像和设备树，以及文件系统了

首先格式化整个卡片

开始分配第一个分区，最小是16M，分不出8M。

第二个分区

整个盘

为了确定改动是有效的，将内核和uboot都全编译一次

时间戳

首先写入uboot

拷贝zimage和设备树进boot盘

文件系统先空着不管他

查看终端打印信息

其中uboot是U-Boot 2016.03 (Oct 23 2019 - 15:52:59 +0800)

kernel是：Oct 23 15:56:44 CST 2019

说明是正常从uboot跳转到了kernel

U-Boot 2016.03 (Oct 23 2019 - 15:52:59 +0800)

CPU: Freescale i.MX6ULL rev1.0 528 MHz (running at 396 MHz)

CPU: Industrial temperature grade (-40C to 105C) at 31C

Reset cause: POR

Board: MX6ULL 14x14 EVK

I2C: ready

DRAM: 512 MiB

NAND: 256 MiB

MMC: FSL_SDHC: 0

*** Warning - bad CRC, using default environment

Display: TFT43AB (480x272)

Video: 480x272x24

In: serial

Out: serial

Err: serial

Net: FEC0 MXC: board_eth_init:failed

No ethernet found.

Normal Boot

Hit any key to stop autoboot: 0

switch to partitions #0, OK

mmc0 is current device

switch to partitions #0, OK

mmc0 is current device

reading boot.scr

** Unable to read file boot.scr **

reading zImage

6680408 bytes read in 587 ms (10.9 MiB/s)

Booting from mmc ...

reading imx6ull-14x14-evk.dtb

35969 bytes read in 22 ms (1.6 MiB/s)

Kernel image @ 0x80800000 [ 0x000000 - 0x65ef58 ]

## Flattened Device Tree blob at 83000000

Booting using the fdt blob at 0x83000000

Using Device Tree in place at 83000000, end 8300bc80

Starting kernel ...

Booting Linux on physical CPU 0x0

Linux version 4.1.15 (jun@ubuntu) (gcc version 4.9.4 (Linaro GCC 4.9-2017.01) ) #2 SMP PREEMPT Wed Oct 23 15:56:44 CST 2019

CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c53c7d

CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache

Machine model: Freescale i.MX6 ULL 14x14 EVK Board

Reserved memory: created CMA memory pool at 0x8c000000, size 320 MiB

Reserved memory: initialized node linux,cma, compatible id shared-dma-pool

Memory policy: Data cache writealloc

PERCPU: Embedded 12 pages/cpu @8bb32000 s16960 r8192 d24000 u49152

Built 1 zonelists in Zone order, mobility grouping on. Total pages: 130048

Kernel command line: console=ttymxc0,115200 root=/dev/mmcblk0p2 rootwait rw

PID hash table entries: 2048 (order: 1, 8192 bytes)

Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)