使用fedora 11,
在连续课程中:
/*
\return 1 success
\return -1 device not found
\return -2 error while opening the device
\return -3 error while getting port parameters
\return -4 Speed (Bauds) not recognized
\return -5 error while writing port parameters
\return -6 error while writing timeout parameters
*/
`char serialib::Open(const char *Device,const unsigned int Bauds){`
struct termios options; // Structure with the device's options
// Open device
fd = open(Device, O_RDWR | O_NOCTTY | O_NDELAY); // Open port
if (fd == -1) return -2; // If the device is not open, return -1
fcntl(fd, F_SETFL, FNDELAY); // Open the device in nonblocking mode
......................
[termina]$ dmesg | grep tty
console [tty0] enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
.................................................. .....
在我的主程序中,我做一个Ret = LS.Open(DEVICE_PORT,4800);
和Ret值是-2,这意味着如上所述打开设备时出错可能是一个权限问题?我怎么能解决这个问题并打开端口,谢谢!