linux4sam download,AT91RM9200 Linux 资源

进行以AT91RM9200为基础的系统的Linux的开发，可以去Linux的官方网站获取内核源代码http://www.kernel.org/ 。

对于AT91RM9200处理器，你可以获得内核，驱动，升级包的最新的版本，不包括用户层和应用层:

http://www.arm.linux.org.uk/

http://www.arm.linux.org.uk/developer/patches/section.php?section=20。

对于正在开发的和还没有提交到ARM Linux开发网站的，或者是没有被ARM Linux正式发行的驱动程序(例如：GPIO驱动，I2C驱动，MTD NAND驱动，以太网驱动，Compact Flash驱动，用于性能测试的Perftest，Real Time Clock驱动，串口驱动，USART驱动，SPI驱动，时钟计数器，USB驱动)可以在下面网址查找：

http://maxim.org.za/AT91RM9200/ for AT91RM9200 Linux (2.4) patches

http://maxim.org.za/AT91RM9200/2.6 for AT91RM9200 Linux (2.6) patches.

适用于AT91RM9200

Does anyone know where I can find a Linux 2.6.x BSP for the AT91RM9200-

EK Atmel Arm-9 development kit?

On Jan 24, 8:22 am, anon wrote:

Habib Bouaziz-Viallet wrote:

Le Wed, 23 Jan 2008 14:38:06 -0800, Cliff Brake a écrit:

On Jan 23, 3:08 pm, twgray wrote:

Does anyone know where I can find a Linux 2.6.x BSP for the AT91RM9200-

EK Atmel Arm-9 development kit?I have built images using OpenEmbedded for the 9260EK and a number of

other systems. I assume it would also work well with the AT91RM9200.

Kernel support is pretty good in the mainline kernel for these

processors.

What is this openembedded that everyone is talking about? I have been

using buildroot infrastructure for our custom board AT91RM9200 (based on

ATMEL Dev Kit) and it works fine.

Their web site is down at the moment (at least I can not access), so

take a look at this:http://en.wikipedia.org/wiki/OpenEmbedded

Look like the web site is back up :-)

OpenEmbedded is just another build system for building embedded Linux

distributions. Some of the reasons I use it are:

- _lots_ of packages -- 1000's: http://www.openembedded.org/filebrowser/org.openembedded.dev/packages

- fairly consistent and symmetrical build system

- support for lots of targets: http://www.openembedded.org/filebrowser/org.openembedded.dev/conf/machine

- works on about any Linux workstation as OE builds many of the native

tools needed

Depending what you need, OE does a pretty good job. Each tool has its

strength, so it really comes down to what need.

http://bec-systems.com/web/content/view/63/9/