网络编程的头文件(这里所有的头文件都在/usr/include目录下面)
经常被一些头文件搞大,不知到到哪个头文件去找结构。这里做个总结
————————————————
版权声明:本文为CSDN博主「雷锋不谢」的原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接及本声明。
原文链接:https://blog.csdn.net/u012566181/article/details/38562475
网络编程的头文件(这里所有的头文件都在/usr/include目录下面)
经常被一些头文件搞大,不知到到哪个头文件去找结构。这里做个总结。
IPv4头部
Linux平台下有两个IPv4结构体,分别是
netinet/ip.h 中定义了两套结构体,分别是struct iphdr 和 struct ip;
linux/ip.h 中定义的结构体struct iphdr;
这三个都是一样的,看个人喜好,我个人喜换netinet/ip.h下面的struct iphdr;
TCP头部
两个
netinet/tcp.h 中定义的结构体 struct tcphdr;
linux/tcp.h 中定义的结构体 struct tcphdr;
任选,不过网络编程的C语言开发者一般在netinet这个地下选,只有内核开发者才去用linux目录。
UDP头部
netinet/udp.h struct udphdr;
linux/udp.h struct udphdr;
ICMP头部
netinet/ip_icmp.h struct icmphdr
linux/icmp.h struct icmphdr
ARP头部
net/if_arp.h struct arphdr // 注意:不是netinet目录了,改成net/if_arp.h!
linux/if_arp.h struct arphdr
MAC头
linux/if_ether.h 中定义了结构体 struct ethhdr
netinet/if_ether.h
原则上在netinet/if_ether.h 文件中没有定义struct ethhdr,但是,在这个文件中,它引用了上面的文件linux/if_ether.h,所以也可也引用这个文件来定义 struct ethhdr.这样就统一了。
其他
值得说明的是,netinet/if_ether.h中定义了struct ether_arp ,它是带有MAC头的整个arp包的定义。
#include
#define IF_NAMESIZE 16
unsigned int if_nametoindex(const char *ifname);
char *if_indextoname(unsigned int ifindex, char *ifname);
if_nametoindex()查询name字符串"eth0""eth1"对应的interface index序号
if_indextoname()根据ifindex序号查询字符串名称
struct ifreq ifr;
strcpy(ifr.ifr_name, "eth0");
ioctl(sockfd, SIOCGIFINDEX, &ifr);
#include
struct sockaddr_ll{
unsigned short sll_family; /* = AF_PACKET */
unsigned short sll_protocol; /* 物理层的协议 */
int sll_ifindex; /* 接口号 */
unsigned short sll_hatype; /* 报头类型 */
unsigned char sll_pkttype; /* 分组类型 */
unsigned char sll_halen; /* 地址长度 */
unsigned char sll_addr[8]; /* 物理层地址 */
};
以上就是各个数据包的头部格式,这在编写构造自己的包时候很有用。
另外,还有些头文件。
netinet/in.h 定义了ip地址结构 struct sockaddr_in (struct in_addr作为sockaddr_in 的成员) 还有函数 htons等,以及一些宏。
在编写用户应用程序时,是少不了这个头文件的(因为要构造ip地址呀)
arpa/inet.h 提供IPv4/v6地址转换函数 inet_ntoa() inet_aton() inet_pton() inet_ntop() 等等。
sys/socket.h 定义了一些列的socket API函数 如 socket(),bind() listen() , send() ,sendmsg(),setsockopt(),等等。所以这个头文件和netinet/in.h头文件是用户程序不可缺少的。
......................................................................
#include
//udp
struct udphdr
{
u_int16_t source;
u_int16_t dest;
u_int16_t len;
u_int16_t check;
};
//........................................................................
#include
struct icmphdr
{
u_int8_t type;//0--reques,8---reply,11----timeout;
u_int8_t code;
u_int16_t checksum;
........
};
..........................................................................
#include
struct iphdr
{
#if defined(__LITTLE_ENDIAN_BITFIELD)
__u8 ihl:4,
version:4;
#elif defined (__BIG_ENDIAN_BITFIELD)
__u8 version:4,
ihl:4;
#else
#error "Please fix "
#endif
__u8 tos;
__be16 tot_len;
__be16 id;
__be16 frag_off;
__u8 ttl;
__u8 protocol; // 1--icmp 6---tcp 17---udp
__sum16 check;
__be32 saddr;
__be32 daddr;
/*The options start here. */
};
//.........................................................................
#include
struct tcphdr {
__be16 source;
__be16 dest;
__be32 seq;
__be32 ack_seq;
#if defined(__LITTLE_ENDIAN_BITFIELD)
__u16 res1:4,
doff:4,
fin:1,
syn:1,
rst:1,
psh:1,
ack:1,
urg:1,
ece:1,
cwr:1;
#elif defined(__BIG_ENDIAN_BITFIELD)
__u16 doff:4,
res1:4,
cwr:1,
ece:1,
urg:1,
ack:1,
psh:1,
rst:1,
syn:1,
fin:1;
#else
#error "Adjust your defines"
#endif
__be16 window;
__sum16 check;
__be16 urg_ptr;
}
//.........................................................................
#include
struct ethhdr
{
unsigned char h_dest[6];
unsigned char h_source[6];
__be16 h_proto;//0x0806---arp,0x0800--ip,0x0835---rarp.
}
//.........................................................................
#include
struct arphdr
{
unsigned short hard_type;//硬件类型,通常0x0001(以太网)
unsigned short protocol;//协议类型,通常0x0800(IP)
unsigned char hard_length;
.....
unsigned short operation_type;//操作类型,1,ARP请求,2,ARP应答
//参考http://baike.baidu.com/view/121586.htm?fr=aladdin
}
————————————————
版权声明:本文为CSDN博主「雷锋不谢」的原创文章,遵循 CC 4.0 BY-SA 版权协议,转载请附上原文出处链接及本声明。
原文链接:https://blog.csdn.net/u012566181/article/details/38562475